Bosch B12 User manual

© 2013 Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, NY 14450
Dimensions (HxWxD) 9.25 in x 8.63 in x .5 in (23.5 cm x 21.92 cm x 1.27 cm)
3 Specifications
Callout Description
1Mounting plate hooks
2Plate mounting hole
2.4 Securing mounting skirt in enclosure
Complete the installation by resting the hook tabs on the mounting plate
hooks within the enclosure. Secure the lock-down tab to the plate mounting
hole with the screw provided in this kit. Refer to Figure 1.1 and Figure 2.3.
11
2
Figure 2.3: Universal enclosure
Reading Bosch Security Systems, Inc. Product Date Codes
For Product Date Code information, refer to the Bosch Security Systems, Inc.
Web site at: http://www.boschsecurity.com/datecodes/.
en Installation Guide
Mounting Plate for D8103
B12

© 2013 Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, NY 14450 F.01U.262.949 | 03 | 2013.02 | 2
2.2 Place the device
Lay the mounting plate on a flat surface with the standoffs facing up. Set
the device on top of the standoffs as shown in Figure 2.2. Make sure the
holes in the corners of the device are aligned with the openings at the top
of each of the standoffs.
Figure 2.1: Standoff attachment
2.3 Secure the device
Secure the device to the mounting plate with self-threading screws as
shown in Figure 2.2. (Screws provided separately with the device being
mounted.)
Figure 2.2: Device attachment to mounting plate
1
2
1
3
22
2
Callout Description
1 Hook tabs
2 Support post
3 Lock down tab
Figure 1.1: BI2 Mounting Plate
1 Overview
The B12 Mounting Plate is required when mounting B5512/B4512 Control
Panels, the B520 Aux Power Module, or other similar devices in D8103 Uni-
versal Enclosures, D8108A Attack Enclosures, or D8109 Fire Enclosures.
This kit includes one B12 Mounting Plate and one screw to secure the lock
down tab.
2 Mounting
To mount a device to the B12 Mounting Plate, complete the following steps.
2.1 Attach standoffs
Snap four plastic standoffs onto the four support posts as shown in Figure
2.1. (Standoffs provided separately with the device being mounted.)
NOTICE!
Do not attach the standoffs with screws at this time.