Bosch DINION 5000 IP User manual

DINION capture 5000 IP
NER Series
en Installation Manual

DINION capture 5000 IP Table of Contents | en 3
Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01
Table of Contents
1Safety 7
1.1 Safety precautions 7
1.2 Important safety instructions 8
1.3 Important notices 11
1.4 FCC & ICES compliance 15
1.5 Bosch notices 17
2 Description 18
2.1 Parts List 18
3 Installing the DINION capture 19
3.1 Determining the Range 19
3.2 Determining the Angle 20
3.3 Mounting the DINION capture 21
3.4 Preparing the Wiring 24
3.4.1 Power Input Connections 25
3.4.2 Ethernet and Power Connections 25
3.4.3 Video Connection for Installation 25
3.5 Making the Connections 26
3.6 Connecting to a Coax Cable 27
3.7 Using a microSD Card 28
3.8 Resetting the DINION capture 5000 IP 29
3.9 Automatic Mode Switching 30
4 Configuration 33
4.1 Menu Navigation Keys 33
4.2 Install Menu 33
4.2.1 Pre-Defined Modes 34
4.2.2 Lens Wizard submenu 35
4.2.3 Network submenu 36
4.2.4 Default submenu 36
5 Browser connection 37
5.1 System requirements 37
5.2 Establishing the connection 38

4en | Table of Contents DINION capture 5000 IP
| 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc.
5.2.1 Password protection in camera 38
5.3 Protected network 38
5.4 Connecting to a hardware decoder 39
5.4.1 Alarm connection 39
5.5 Connection established 40
5.5.1 LIVEPAGE 40
5.5.2 RECORDINGS 40
5.5.3 SETTINGS 41
6 Operation via the browser 42
6.1 Livepage 42
6.1.1 Processor load 42
6.1.2 Image selection 43
6.1.3 Digital I/O 44
6.1.4 System Log / Event Log 44
6.1.5 Saving snapshots 45
6.1.6 Recording video sequences 45
6.1.7 Running recording program 45
6.1.8 Audio communication 46
6.2 Recordings page 47
6.2.1 Controlling playback 47
7 Basic Mode 49
7.1 Basic Mode menu tree 49
7.2 Device Access 50
7.2.1 Camera name 50
7.2.2 Password 50
7.3 Date/Time 51
7.4 Network 52
7.5 Encoder 53
7.6 Recording 53
7.6.1 Storage medium 53
7.7 System Overview 53
8 Advanced Mode 54
8.1 Advanced Mode menu tree 54
8.2 General 56

DINION capture 5000 IP Table of Contents | en 5
Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01
8.2.1 Identification 56
8.2.2 Password 56
8.2.3 Date/Time 58
8.2.4 Display Stamping 59
8.3 Web Interface 61
8.3.1 Appearance 61
8.3.2 LIVEPAGE Functions 62
8.3.3 Logging 63
8.4 Camera 64
8.4.1 Mode 64
8.4.2 ALC 66
8.4.3 Shutter/AGC 67
8.4.4 Enhance 68
8.4.5 Encoder Profile 70
8.4.6 Encoder Streams 74
8.4.7 Privacy Masks 75
8.4.8 Audio 75
8.4.9 Installer Menu 77
8.5 Recording 78
8.5.1 Storage Management 79
8.5.2 Recording Profiles 82
8.5.3 Retention Time 83
8.5.4 Recording Scheduler 84
8.5.5 Recording Status 85
8.6 Alarm 86
8.6.1 Alarm Connections 86
8.6.2 Video Content Analyses (VCA) 89
8.6.3 VCA configuration- Profiles 90
8.6.4 VCA configuration - Scheduled 96
8.6.5 VCA configuration - Event triggered 98
8.6.6 Audio Alarm 99
8.6.7 Alarm E-Mail 100
8.6.8 Alarm Task Editor 102
8.7 Interfaces 103
8.7.1 Alarm input 103
8.7.2 Relay 103
8.8 Network 105

6en | Table of Contents DINION capture 5000 IP
| 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc.
8.8.1 Network Access 105
8.8.2 Advanced 109
8.8.3 Multicast 110
8.8.4 FTP Posting 112
8.8.5 Encryption 113
8.9 Service 113
8.9.1 Maintenance 113
8.9.2 Licenses 115
8.9.3 System Overview 115
A Dimensional Drawings 116

DINION capture 5000 IP Safety | en 7
Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01
1Safety
1.1 Safety precautions
DANGER!
High risk: This symbol indicates an imminently hazardous
situation such as "Dangerous Voltage" inside the product.
If not avoided, this will result in an electrical shock, serious
bodily injury, or death.
WARNING!
Medium risk: Indicates a potentially hazardous situation.
If not avoided, this could result in minor or moderate bodily
injury.
CAUTION!
Low risk: Indicates a potentially hazardous situation.
If not avoided, this could result in property damage or risk of
damage to the unit.
NOTICE!
This symbol indicates information or a company policy that
relates directly or indirectly to the safety of personnel or
protection of property.

8en | Safety DINION capture 5000 IP
| 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc.
1.2 Important safety instructions
Read, follow, and retain for future reference all of the following
safety instructions. Heed all warnings on the unit and in the
operating instructions before operating the unit.
1. Cleaning - Unplug the unit from the outlet before cleaning.
Follow any instructions provided with the unit. Generally,
using a dry cloth for cleaning is sufficient but a moist, fluff-
free cloth or leather shammy may also be used. Do not use
aerosol cleaners.
2. Heat Sources - Do not install the unit near any heat
sources such as radiators, heaters, stoves, or other
equipment (including amplifiers) that produce heat.
3. Object and liquid entry - Never push objects of any kind
into this unit through openings as they may touch
dangerous voltage points or short-out parts that could
result in a fire or electrical shock. Never spill liquid of any
kind in the unit.
4. Lightning - For added protection during a lightning storm,
or when leaving this unit unattended and unused for long
periods, unplug the power source and disconnect the
cable system. This will prevent damage to the unit from
lightning and power line surges.
5. Controls adjustment - Adjust only those controls specified
in the operating instructions. Improper adjustment of
other controls may cause damage to the unit. Use of
controls or adjustments, or performance of procedures
other than those specified, may result in hazardous
radiation exposure.
6. Overloading - Do not overload circuits. This can cause fire
or electrical shock.
7. Power cable protection - Protect the power cable from
foot traffic, from being pinched by items placed upon it,
and at cable's exit from the unit.

DINION capture 5000 IP Safety | en 9
Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01
8. Power disconnect - Units have power supplied to the unit
whenever the power cord is inserted into the power
source. The power cord plug is the main power disconnect
device for switching off the voltage for all units.
9. Power sources - Operate the unit only from the type of
power source indicated on the label. Before proceeding,
be sure to disconnect the power from the cable to be
installed into the unit.
– For external power supplied units, use only the
recommended or approved power supplies.
– For limited power source units, this power source
must comply with EN60950. Substitutions may
damage the unit or cause fire or shock.
– For 24 VAC units, voltage applied to the unit's power
input should not exceed ±10%, or 26.4 VAC. User-
supplied wiring must comply with local electrical
codes (Class 2 power levels). Do not ground the
supply at the terminals or at the unit's power supply
terminals.
– If unsure of the type of power supply to use, contact
your dealer or local power company.
10. Servicing - Do not attempt to service this unit yourself.
11. Damage requiring service - Unplug the unit from the main
AC power source and refer servicing to qualified service
personnel when any damage to the equipment has
occurred, such as:
– the power supply cord or plug is damaged;
– internal exposure to moisture, water, and/or
inclement weather (rain, snow, etc.);
– liquid has been spilled in the equipment;
– an object has fallen into the unit;
– unit has been dropped;
– unit exhibits a distinct change in performance;
– unit does not operate normally when the user
correctly follows the operating instructions.

10 en | Safety DINION capture 5000 IP
| 1.0 | 2012.01 Installation Manual Bosch Security Systems, Inc.
12. Replacement parts - Be sure the service technician uses
replacement parts specified by the manufacturer, or that
have the same characteristics as the original parts.
Unauthorized substitutions may cause fire, electrical
shock, or other hazards.
13. Safety check - Safety checks should be performed upon
completion of service or repairs to the unit to ensure
proper operating condition.
14. Installation - Install in accordance with the manufacturer's
instructions and in accordance with applicable local codes.
15. Attachments, changes or modifications - Only use
attachments/accessories specified by the manufacturer.
Any change or modification of the equipment, not
expressly approved by Bosch, could void the warranty or,
in the case of an authorization agreement, authority to
operate the equipment.