Bosch LTC 0465 Series User manual

Dinion Day/Night Camera
LTC0465
en Installation and Operation manual

Dinion Day/Night Camera Table of Contents | en 3
Bosch Security Systems Installation and Operation manual F.01U.163.823 | v1.0 | 2010.01
Table of Contents
1Safety 5
1.1 Safety precautions 5
1.2 Important safety instructions 6
1.3 Important notices 7
1.4 FCC & ICES compliance 8
1.5 UL certification 10
1.6 Bosch notices 11
2 Introduction 12
2.1 Features 12
2.2 Unpacking 12
3 Connections 13
3.1 Power connection 13
3.1.1 Low voltage cameras 13
3.1.2 High voltage cameras 14
3.2 Video connection 14
3.2.1 Output Video signal 14
3.3 Alarm and relay connector 15
3.4 Lens mounting 16
3.5 Back focus adjustment 17
3.6 Mounting the camera 19
3.7 Day/Night switching 19
4Configuration 20
4.1 Menus 20
4.1.1 Top level menus 20
4.1.2 Menu navigation 20
4.2 Camera control communication (Bilinx) 21
4.3 Main menu structure 22
4.3.1 Shutter/AGC submenu 23
4.3.2 Day/Night submenu 24
4.3.3 Color submenu 25

4en | Table of Contents Dinion Day/Night Camera
F.01U.163.823 | v1.0 | 2010.01 Installation and Operation manual Bosch Security Systems
4.3.4 VMD submenu (remotely via Bilinx only) 25
4.4 Install menu structure 27
4.4.1 Lens Wizard submenu 27
4.4.2 Alarm submenu 29
4.4.3 Defaults submenu 30
5 Technical Data 31
5.1 Specifications 31
Glossary 33

Dinion Day/Night Camera Safety | en 5
Bosch Security Systems Installation and Operation manual F.01U.163.823 | v1.0 | 2010.01
1Safety
1.1 Safety precautions
DANGER!
High risk: This symbol indicates an imminently hazardous
situation such as "Dangerous Voltage" inside the product.
If not avoided, this will result in an electrical shock, serious
bodily injury, or death.
WARNING!
Medium risk: Indicates a potentially hazardous situation.
If not avoided, this could result in minor or moderate bodily
injury.
CAUTION!
Low risk: Indicates a potentially hazardous situation.
If not avoided, this could result in property damage or risk of
damage to the unit.
NOTICE!
This symbol indicates information or a company policy that
relates directly or indirectly to the safety of personnel or
protection of property.

6en | Safety Dinion Day/Night Camera
F.01U.163.823 | v1.0 | 2010.01 Installation and Operation manual Bosch Security Systems
1.2 Important safety instructions
Read, follow, and retain for future reference all of the following
safety instructions. Heed all warnings on the unit and in the
operating instructions before operating the unit.
1. Cleaning - Generally, using a dry cloth for cleaning is
sufficient but a moist, fluff-free cloth or leather shammy
may also be used. Do not use liquid cleaners or aerosol
cleaners.
2. Heat Sources - Do not install the unit near any heat
sources such as radiators, heaters, stoves, or other
equipment (including amplifiers) that produce heat.
3. Water - Never spill liquid of any kind on the unit.
4. Lightning - Take precautions to protect the unit from
power and lightning surges.
5. Controls adjustment - Adjust only those controls specified
in the operating instructions. Improper adjustment of
other controls may cause damage to the unit.
6. Power sources - Operate the unit only from the type of
power source indicated on the label.
7. Servicing - Unless qualified, do not attempt to service this
unit yourself. Refer all servicing to qualified service
personnel.
8. Replacement parts - Use only replacement parts specified
by the manufacturer.
9. Installation - Install in accordance with the manufacturer's
instructions and in accordance with applicable local codes.
10. Attachments, changes or modifications - Only use
attachments/accessories specified by the manufacturer.
Any change or modification of the equipment, not
expressly approved by Bosch, could void the warranty or,
in the case of an authorization agreement, authority to
operate the equipment.

Dinion Day/Night Camera Safety | en 7
Bosch Security Systems Installation and Operation manual F.01U.163.823 | v1.0 | 2010.01
1.3 Important notices
Disposal - Your Bosch product was developed and
manufactured with high-quality material and components that
can be recycled and reused. This symbol means that
electronic and electrical appliances, which have reached the
end of their working life, must be collected and disposed of
separately from household waste material. Separate collecting
systems are usually in place for disused electronic and
electrical products. Please dispose of these units at an
environmentally compatible recycling facility, per European
Directive 2002/96/EC
WARNING!
Power disconnect for high voltage versions: A unit has power
supplied whenever the power cord is inserted into the power
source. The power cord plug is the main power disconnect for
the unit. For pluggable equipment, install the socket outlet near
the equipment so it is easily accessible.
WARNING!
All-pole power switch: Incorporate an all-pole power switch,
with a contact separation of at least 3 mm in each pole, into the
electrical installation of the building.
CAUTION!
Fuse rating: The branch circuit protection must be secured with
a maximum fuse rating of 16 A. This must be in accordance with
NEC800 (CEC Section 60).
CAUTION!
The Low Voltage power supply unit must comply with EN/UL
60950. The power supply must be a SELV-LPS unit or a SELV -
Class 2 unit (Safety Extra Low Voltage - Limited Power Source).

8en | Safety Dinion Day/Night Camera
F.01U.163.823 | v1.0 | 2010.01 Installation and Operation manual Bosch Security Systems
1.4 FCC & ICES compliance
FCC & ICES Information
(U.S.A. and Canadian Models Only)
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
– reorient or relocate the receiving antenna;
– increase the separation between the equipment and
receiver;
– connect the equipment into an outlet on a circuit different
from that to which the receiver is connected;
– consult the dealer or an experienced radio/TV technician
for help.
Intentional or unintentional modifications, not expressly
approved by the party responsible for compliance, shall not be
made. Any such modifications could void the user's authority to
operate the equipment. If necessary, the user should consult
the dealer or an experienced radio/television technician for
corrective action.
The user may find the following booklet, prepared by the
Federal Communications Commission, helpful: How to Identify
and Resolve Radio-TV Interference Problems. This booklet is
available from the U.S. Government Printing Office,
Washington, DC 20402, Stock No. 004-000-00345-4.

Dinion Day/Night Camera Safety | en 9
Bosch Security Systems Installation and Operation manual F.01U.163.823 | v1.0 | 2010.01
Informations FCC et ICES
(modèles utilisés aux États-Unis et au Canada uniquement)
Suite à différents tests, cet appareil s'est révélé conforme aux
exigences imposées aux appareils numériques de classe B, en
vertu de la section 15 du règlement de la Commission fédérale
des communications des États-Unis (FCC), et en vertu de la
norme ICES-003 d'Industrie Canada. Ces exigences visent à
fournir une protection raisonnable contre les interférences
nuisibles lorsque l'appareil est utilisé dans le cadre d'une
installation résidentielle. Cet appareil génère, utilise et émet
de l'énergie de radiofréquences et peut, en cas d'installation ou
d'utilisation non conforme aux instructions, engendrer des
interférences nuisibles au niveau des radiocommunications.
Toutefois, rien ne garantit l'absence d'interférences dans une
installation particulière. Il est possible de déterminer la
production d'interférences en mettant l'appareil
successivement hors et sous tension, tout en contrôlant la
réception radio ou télévision. L'utilisateur peut parvenir à
éliminer les interférences éventuelles en prenant une ou
plusieurs des mesures suivantes:
– Modifier l'orientation ou l'emplacement de l'antenne
réceptrice;
– Éloigner l'appareil du récepteur;
– Brancher l'appareil sur une prise située sur un circuit
différent de celui du récepteur;
– Consulter le revendeur ou un technicien qualifié en radio/
télévision pour obtenir de l'aide.
Toute modification apportée au produit, non expressément
approuvée par la partie responsable de l'appareil, est
strictement interdite. Une telle modification est susceptible
d'entraîner la révocation du droit d'utilisation de l'appareil.
La brochure suivante, publiée par la Commission fédérale des
communications (FCC), peut s'avérer utile : How to Identify and
Resolve Radio-TV Interference Problems (Comment identifier et
résoudre les problèmes d’interférences de radio et de télévision).
Cette brochure est disponible auprès du U.S. Government

10 en | Safety Dinion Day/Night Camera
F.01U.163.823 | v1.0 | 2010.01 Installation and Operation manual Bosch Security Systems
Printing Office, Washington, DC 20402, États-Unis, sous la
référence n° 004-000-00345-4.
1.5 UL certification
Disclaimer
Underwriter Laboratories Inc. ("UL") has not tested the
performance or reliability of the security or signaling aspects of
this product. UL has only tested fire, shock and/or casualty
hazards as outlined in UL's Standard(s) for Safety for Closed
Circuit Television Equipment, UL 2044. UL Certification does not
cover the performance or reliability of the security or signaling
aspects of this product.
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR
CERTIFICATIONS WHATSOEVER REGARDING THE
PERFORMANCE OR RELIABILITY OF ANY SECURITY OR
SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.
Disclaimer
Underwriter Laboratories Inc. ("UL") has not tested the
performance or reliability of the security or signaling aspects of
this product. UL has only tested fire, shock and/or casualty
hazards as outlined in UL's Standard(s) for Safety for Information
Technology Equipment, UL 60950-1. UL Certification does not
cover the performance or reliability of the security or signaling
aspects of this product.
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR
CERTIFICATIONS WHATSOEVER REGARDING THE
PERFORMANCE OR RELIABILITY OF ANY SECURITY OR
SIGNALING-RELATED FUNCTIONS OF THIS PRODUCT.

Dinion Day/Night Camera Safety | en 11
Bosch Security Systems Installation and Operation manual F.01U.163.823 | v1.0 | 2010.01
1.6 Bosch notices
Copyright
This manual is the intellectual property of Bosch Security
Systems and is protected by copyright. All rights reserved.
Trademarks
All hardware and software product names used in this
document are likely to be registered trademarks and must be
treated accordingly.
Note:
This manual has been compiled with great care and the
information it contains has been thoroughly verified. The text
was complete and correct at the time of printing. The ongoing
development of the products may mean that the content of the
user guide can change without notice. Bosch Security Systems
accepts no liability for damage resulting directly or indirectly
from faults, incompleteness or discrepancies between the user
guide and the product described.
More information
For more information please contact the nearest Bosch Security
Systems location or visit www.BoschSecurity.com

12 en | Introduction Dinion Day/Night Camera
F.01U.163.823 | v1.0 | 2010.01 Installation and Operation manual Bosch Security Systems
2 Introduction
2.1 Features
The Dinion Day/Night is a professional surveillance day/night
camera that incorporates 10-bit digital signal processing. The
Dinion Day/Night camera is easy to install and ready to use, and
offers good quality picture performance.
Features include:
– Day/Night camera with mechanically switching IR filter
– Bilinx™ bi-directional coaxial communications
– Enhanced video motion detection
– Backlight compensation
– Lens autodetection
– Lens wizard for easy backfocus
– Alarm input and relay output
2.2 Unpacking
Unpack carefully and handle the equipment with care.
The packaging contains:
– Dinion Day/Night camera
– CCD protection cap (mounted on camera)
– Spare lens connector (male)
– These instructions
If equipment has been damaged during shipment, repack it in
the original packaging and notify the shipping agent or supplier.
WARNING!
Installation should only be performed by qualified service
personnel in accordance with the National Electrical Code or
applicable local codes.
CAUTION!
The camera module is a sensitive device and must be handled
carefully.

Dinion Day/Night Camera Connections | en 13
Bosch Security Systems Installation and Operation manual F.01U.163.823 | v1.0 | 2010.01
3 Connections
3.1 Power connection
3.1.1 Low voltage cameras
Figure 3.1 Low voltage power connection
Connect power from a 24 VAC or 12 VDC class 2 power supply
as follows:
– Use AWG16 to 22 stranded wire or AWG16 to 26 solid
wire; cut back 5 mm (0.2 in) of insulation.
– Push in the tabs and insert the wires.
Note
These connections are not polarity sensitive.
CAUTION!
Before proceeding, disconnect the power from the power
supply cable. Ensure that the voltage of the unit matches the
voltage and type of the power supply being used.
VIDEO
12 VDC
24 VAC
ALARM
10 mm

14 en | Connections Dinion Day/Night Camera
F.01U.163.823 | v1.0 | 2010.01 Installation and Operation manual Bosch Security Systems
3.1.2 High voltage cameras
Figure 3.2 High voltage power connection
Connect the power cable of a high voltage camera to either a
230 VAC or a 120 VAC power supply outlet depending on the
version.
3.2 Video connection
Figure 3.3 BNC connectors
3.2.1 Output Video signal
The camera has a BNC connector to connect the video coax
cable with a male BNC connector.
VIDEO
ALARM
VIDEO
ALARM
Video BNC

Dinion Day/Night Camera Connections | en 15
Bosch Security Systems Installation and Operation manual F.01U.163.823 | v1.0 | 2010.01
3.3 Alarm and relay connector
Figure 3.4 Alarm and relay connector pins
– Max. wire diameter AWG 22-28 for both stranded and
solid; cut back 5 mm (0.2 in) of insulation.
– Default relay position normally open (n.o.); no alarm.
– Alarm output relay switching capability: Max voltage 30VAC
or +40 VDC. Max 0.5 A continuous, 10 VA.
– Alarm in: TTL logic, +5V nominal, +40 VDC max, DC coupled
with 22 kOhm pull-up to +3.3 V.
– Alarm in: configurable as active low or active high.
– Max. 42 V allowed between camera ground and each of the
relay pins.
Pin Alarm socket
1Alarminground
2Alarmin
3 Relay out contact 1
4 Relay out contact 2
ALARM
14
5 mm
(0.2 in)

16 en | Connections Dinion Day/Night Camera
F.01U.163.823 | v1.0 | 2010.01 Installation and Operation manual Bosch Security Systems
3.4 Lens mounting
The camera accepts CS-mount lenses. C-mount lenses can be
mounted using a lens adapter ring. DC-iris lenses are
recommended for the best picture performance. The camera
automatically detects the type of lens used and optimizes
performance accordingly. A spare male lens connector is
provided.
Note
If a short circuit is detected on the lens connector, the on-
screen display (OSD) failure message LENS SHORT CIRCUIT is
shown. The lens circuit is automatically disabled to avoid
internal damage. Remove the lens connector and check the pin
connections.
CAUTION!
To avoid damaging the CCD sensor when using a C-mount lens,
make sure a lens adapter ring (not included) is mounted onto
the camera before mounting the lens.
Lenses weighing more than 0.5 kg (1.1lbs) must be separately
supported.
Figure 3.5 Mounting a lens Figure 3.6 Lens connector
Bosch
Bosch
Pin Video iris lens DC iris lens
1 Supply (11.5V ±0.5, 50mA max.) Damp -
2Notused Damp+
3 Video signal 1Vpp 1kOhm Drive +
4 Ground Drive -

Dinion Day/Night Camera Connections | en 17
Bosch Security Systems Installation and Operation manual F.01U.163.823 | v1.0 | 2010.01
3.5 Back focus adjustment
To optimize picture sharpness in both bright and low-level
lighting, adjust the back focus. Use the camera's unique Lens
Wizard. This ensures that the object of interest always remains
in focus, even when focusing at the maximum lens iris opening
(for example, at night).
– When back focusing varifocal lenses, adjust to obtain a
sharp picture in both wide-angle and tele positions for
both far and near focus.
– When back focusing zoom lenses, ensure the object of
interest remains in focus throughout the entire zoom range
of the lens.
To adjust back focus:
1. Open the slide door panel at the side of the camera.
1. Unlock the back focus locking button.
2. Press and hold the center key for more than 1 second until
the Install menu appears.
3. Select Wizard and move cursor to the Set Back Focus
Now item.
4. Turn the back focus adjustment as required.
Bosch

18 en | Connections Dinion Day/Night Camera
F.01U.163.823 | v1.0 | 2010.01 Installation and Operation manual Bosch Security Systems
5. Lock the back focus locking button.
6. Press and hold the center key for more than 1 second until
all the menus disappear.
7. Close the side door panel.
Note:
To backfucus a zoom lens, see the zoom lens installation guide.
Bosch
Bosch

Dinion Day/Night Camera Connections | en 19
Bosch Security Systems Installation and Operation manual F.01U.163.823 | v1.0 | 2010.01
3.6 Mounting the camera
The camera can be mounted either from the top or from the
bottom (1/4" 20 UNC thread). The bottom mounting is isolated
from ground to prevent ground loops.
Figure 3.7 Mounting a camera
3.7 Day/Night switching
The camera is equipped with a motorized IR filter. The
mechanical IR filter can be removed in low-light or IR
illuminated applications by software configuration settings.
If Auto switching mode is selected, the camera automatically
switches the filter depending on the observed light level. The
switching level is programmable. In Auto switching mode the
camera prioritizes motion (the camera gives sharp images
without motion blur as long as the light level permits) or color
(the camera gives color pictures as long as the light level
permits). The camera recognizes IR illuminated scenes to
prevent unwanted switching to color mode.
There are three different methods of controlling the IR filter:
– via an alarm input,
– via Bilinx communication, or
– automatically, based on the observed light levels.
CAUTION!
Do not point the camera/lens into direct sunlight as this may
damage the sensors.

20 en | Configuration Dinion Day/Night Camera
F.01U.163.823 | v1.0 | 2010.01 Installation and Operation manual Bosch Security Systems
4 Configuration
The camera normally provides an optimal picture without the
need for further adjustments. However, advanced set-up
options are available in a menu system for getting the best
results under special circumstances.
The camera implements your changes immediately so that
before and after settings are easily compared.
4.1 Menus
4.1.1 Top level menus
There are two upper level menus: a Main menu and an Install
menu. The menus have functions that can be selected directly
or submenus for more detailed set-up.
– To access the Main menu, press the menu/select button
(center) for less than 1 second. The Main menu appears on
the monitor. Select and set-up the picture enhancement
functions. If not satisfied with your changes, recall the
default values.
– The camera also has an Install menu in which the
installation settings can be set. To access the Install menu,
press the menu/select button (center) for longer than 2
seconds.
4.1.2 Menu navigation
Five keys, located behind the side door panel, are used for
navigating through menu system.
Figure 4.1 Side panel door Figure 4.2 Menu/select key
Bosch
Bosch