Bose MB210 User manual

MB210 & MB210-WR
Compact Subwoofers
Installation Guide
Guía de instalación
Guide d’installation
Installationsanleitung
Guida all’installazione
Installatiehandleiding

2 •English
PRO.BOSE.COM
MB210/MB210-WR •Installation Guide
Important Safety Instructions
Please read and keep all safety and use instructions.
This product is intended for installation by professional installers only! This document is
intended to provide professional installers with basic installation and safety guidelines for this
product in typical fixed-installation systems. Please read this document and all safety warnings
before attempting installation.
Do not attempt to service this product yourself. Refer all servicing to authorized service centers,
installers, technicians, dealers or distributors. To contact Bose Professional or to find a dealer or
distributor near you, visit PRO.BOSE.COM.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water (MB210 only).
6. Clean only with a dry cloth (MB210 only).
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources, such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Only use attachments/accessories specified by the manufacturer.
10. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
WARNINGS/CAUTIONS:
Contains small parts which may be a choking hazard. Not suitable for children
under age 3.
This product contains magnetic material. Consult your physician on whether this
might aect your implantable medical device.
All Bose products must be installed in accordance with local, state, federal and industry
regulations. It is the installer’s responsibility to ensure installation of the loudspeakers and
mounting system is performed in accordance with all applicable codes, including local building
codes and regulations. Consult the local authority having jurisdiction before installing this
product.
Unsafe mounting or overhead suspension of any heavy load can result in serious injury or
death, and property damage. It is the installer’s responsibility to evaluate the reliability of any
mounting method used for their application. Only professional installers with the knowledge
of proper hardware and safe mounting techniques should attempt to install any loudspeaker
overhead.
Do not mount the product in locations where condensation may occur (MB210 only).
This product is not intended for installation or use in indoor water facility areas (including,
without limitation, indoor pools, indoor water parks, hot tub rooms, saunas, steam rooms and
indoor skating rinks) (MB210 only).
Only use the mounting hardware supplied with this product.
The MB210 wall mounting kit is only for use with model MB210.
The MB210-WR wall mounting kit is only for use with model MB210-WR.
Do not mount on surfaces that are not sturdy, or that have hazards concealed behind them,
such as electrical wiring or plumbing. If you are not sure about installing the bracket, contact a
qualified professional installer. Ensure the bracket is installed according to local building codes.
Do not use hydrocarbon based solvents, lubricants or cleaning agents of any type on or
around Bose speakers, and associated mounting hardware, during installation. The use of such
hydrocarbon based lubricants, solvents or cleaning agents on or around the mounting anchors
and screws can lead to degradation of the plastic material, possibly resulting in cracking and
premature failure of the product.
Keep the product away from fire and heat sources. Do NOT place naked flame sources, such as
lighted candles, on or near the product.
Regulatory Information
This product conforms to all applicable EU directive requirements. The complete
Declaration of Conformity can be found at www.Bose.com/compliance.
This symbol means the product must not be discarded as household waste, and
should be delivered to an appropriate collection facility for recycling. Proper
disposal and recycling helps protect natural resources, human health and the
environment. For more information on disposal and recycling of this product,
contact your local municipality, disposal service, or the shop where you bought this
product.
China Restriction of Hazardous Substances Table
Names and Contents of Toxic or Hazardous Substances or Elements
Toxic or Hazardous Substances and Elements
Part Name Lead
(Pb) Mercury (Hg) Cadmium (Cd) Hexavalent (CR(VI))
Polybrominated
Biphenyl
(PBB)
Polybrominated
diphenylether
(PBDE)
PCBs X O O O O O
Metal Parts X O O O O O
Plastic Parts O O O O O O
Speakers X O O O O O
Cables X O O O O O
This table is prepared in accordance with the provisions of SJ/T 11364.
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials
for this part is below the limit requirement of GB/T 26572.
X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous
materials used for this part is above the limit requirement of GB/T 26572.
Taiwan Restriction of Hazardous Substances Table
Equipment name: MB210 and MB210-WR Compact Subwoofers , Type designation: 785043, 811432
Restricted substances and its chemical symbols
Unit Lead
(Pb) Mercury (Hg) Cadmium (Cd)
Hexavalent
chromium
(Cr+6)
Polybrominated
biphenyls (PBB)
Polybrominated
diphenyl ethers
(PBDE)
PCBs -○ ○ ○ ○ ○
Metal Parts -○ ○ ○ ○ ○
Plastic Parts ○ ○ ○ ○ ○ ○
Speakers -○ ○ ○ ○ ○
Cables -○ ○ ○ ○ ○
Note 1: “○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference
value of presence.
Note 2: The “−” indicates that the restricted substance corresponds to the exemption.
Date of Manufacture: The eighth digit in the serial number indicates the year of manufacture;
“7” is 2007 or 2017.
China Importer: Bose Electronics (Shanghai) Company Limited, Part C, Plan 9,
No. 353 North Riying Road, China (Shanghai) Pilot Free Trade Zone
EU Importer: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, The Netherlands
Mexico Importer: Bose de México, S. de R.L. de C.V. , Paseo de las Palmas 405-204, Lomas de
Chapultepec, 11000 México, D.F. For importer & service information: [phone]
Taiwan Importer: Bose Taiwan Branch, 9F-A1, No. 10, Section 3, Minsheng East Road, Taipei City
104, Taiwan. Phone Number: [phone]
Neutrik is a registered trademark of Neutrik AG.
Bose and ArenaMatch are trademarks of Bose Corporation.
Bose Corporation Headquarters: 1-877-230-5639
©2018 Bose Corporation. No part of this work may be reproduced, modified, distributed or
otherwise used without prior written permission.
Warranty Information
This product is covered by a limited warranty.
For warranty details, visit PRO.BOSE.COM.

PRO.BOSE.COM
Guía de instalación •MB210/MB210-WR
Español •3
Instrucciones importantes de seguridad
Lea y conserve todas las instrucciones de uso y seguridad.
Este producto está diseñado para ser instalado únicamente por instaladores profesionales.
Este documento está diseñado para proveer las pautas de seguridad e instalación básicas a los
instaladores profesionales de este producto en sistemas de instalación fija comunes. Lea este
documento y todas las advertencias de seguridad antes de comenzar la instalación.
No intente reparar este producto por su cuenta. Remita todas las reparaciones a centros
de servicio, instaladores, técnicos o distribuidores autorizados. Para comunicarse con Bose
Professional o para encontrar un distribuidor cerca de usted, visite PRO.BOSE.COM.
1. Lea estas instrucciones.
2. Guarde estas instrucciones.
3. Preste atención a las advertencias.
4. Siga todas las instrucciones.
5. No use este aparato cerca del agua (MB210 solamente).
6. Límpielo solamente con un paño seco (MB210 solamente).
7. No obstruya ninguna abertura de ventilación. Realice la instalación conforme a las
instrucciones del fabricante.
8. No lo instale cerca de una fuente de calor, como radiadores, rejillas de calefacción, estufas
u otros aparatos (incluidos los amplificadores) que produzcan calor.
9. Use solamente los accesorios especificados por el fabricante.
10. Use solamente con el carro, el soporte de piso, el trípode, el soporte o la mesa
especificados por el fabricante o vendidos con el dispositivo. Cuando se usa
un carro, tenga precaución al moverlo con el dispositivo para evitar lesiones
por tropiezos.
ADVERTENCIAS/PRECAUCIONES:
Contiene piezas pequeñas que pueden provocar asfixia. No recomendable para
niños menores de 3 años.
Este producto contiene materiales magnéticos. Consulte con su médico si esto
Todos los productos Bose deben instalarse conforme a las leyes locales, estatales, federales
y del sector. Es responsabilidad del instalador garantizar que la instalación del sistema de
soporte y los altavoces se realice conforme a los códigos aplicables, incluidos los códigos y las
reglamentaciones de construcción locales. Consulte a la autoridad local competente antes de
instalar este producto.
El montaje inseguro o la suspensión en alturas de cualquier carga pesada puede provocar
lesiones graves o la muerte, además de daños a la propiedad. Es responsabilidad del instalador
evaluar la confiabilidad de cualquier método de montaje utilizado para su aplicación.
Únicamente los instaladores profesionales con conocimiento de las herramientas adecuadas y
las técnicas de montaje seguro deberían intentar instalar cualquier altavoz en altura.
NO realice alteraciones no autorizadas a este producto.
No monte el producto en lugares donde se pueda generar condensación (MB210 solamente).
Este producto no se ha diseñado para instalar o utilizar en áreas acuáticas recreativas de
interior (incluidas, entre otras, piscinas de interior, parques acuáticos de interior, salas de baño
caliente, saunas, cuartos de vapor y pistas de patinaje de interior) (MB210 solamente).
Utilice únicamente los componentes físicos de montaje incluidos en este producto.
El kit de montaje en pared MB210 está destinado únicamente para el uso con el modelo MB210.
El kit de montaje en pared MB210-WR está destinado únicamente para el uso con el modelo
MB210-WR.
Monte únicamente en superficies que sean resistentes o que no presenten peligros ocultos,
como cableado eléctrico o plomería. Si no está seguro acerca de cómo instalar el soporte,
comuníquese con un instalador profesional cualificado. Asegúrese de que el soporte esté
instalado de acuerdo con los códigos locales de construcción.
No utilice ningún tipo de solventes, lubricantes ni productos de limpieza a base de
hidrocarburos sobre los altavoces Bose o los accesorios de montaje asociados durante la
instalación. El uso de dichos solventes, lubricantes o productos de limpieza sobre los anclajes
de montaje y los tornillos puede degradar el material plástico, lo que posiblemente ocasione
grietas y fallas prematuras del producto.
Mantenga el producto lejos del fuego y de fuentes de calor. NO coloque encima ni cerca del
producto fuentes de llamas de fuego expuestas, como velas encendidas.
Información regulatoria
Este producto cumple los requisitos de todas las Directivas de la UE aplicables
legalmente. Encontrará la declaración de conformidad completa en
www.Bose.com/compliance.
Este símbolo significa que el producto no debe desecharse como residuo
doméstico y debe enviarse a una planta para tratamiento de residuos apropiada
para su reciclado. Una eliminación y un reciclado adecuados ayudan a proteger los
recursos naturales, la salud humana y el medioambiente. Para obtener más
información acerca de la eliminación y el reciclado de este producto, comuníquese
con su municipalidad local, un centro de servicios de desecho o la tienda donde
compró este producto.
Fecha de fabricación: El octavo dígito del número de serie indica el año de fabricación; p. ej.,
"7" es 2007 o 2017.
Importador para China: Bose Electronics (Shanghái) Company Limited, Part C, Plan 9,
N.º 353 North Riying Road, Zona franca piloto de China (Shanghái)
Importador para la UE: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, Países Bajos
Importador para México: Bose de México, S. de R.L. de C.V. , Paseo de las Palmas 405-204,
Lomas de Chapultepec, 11000 México, D.F. Para obtener información sobre el servicio y el
importador, comuníquese al: [phone]
Importador para Taiwán: Bose Taiwan Branch, 9F-A1, N.º 10, Section 3, Minsheng East Road,
Taipei City 104, Taiwán. Número telefónico: [phone]
Neutrik es una marca comercial registrada de Neutrik AG.
Bose y ArenaMatch son marcas comerciales de Bose Corporation.
Oficinas centrales de Bose Corporation: 1-877-230-5639
©2018 Bose Corporation. Ninguna parte de este trabajo podrá reproducirse, modificarse,
distribuirse ni usarse sin un permiso previo por escrito.
Información de la garantía
Este producto está cubierto con una garantía limitada.
Para obtener información sobre la garantía, visite PRO.BOSE.COM.

PRO.BOSE.COM
MB210/MB210-WR •Guide d’installation
4 •Français
Instructions importantes relatives à la sécurité
Merci de lire et de conserver le manuel d’instruction et de respecter les
consignes de sécurité.
Ce produit doit être installé par un technicien professionnel ! Ce document est destiné à
fournir aux techniciens professionnels les directives de montage et de sécurité relatives à
ce produit dédié à une installation fixe. Veuillez lire ce document, ainsi que l’ensemble des
avertissements de sécurité avant de procéder à l’installation.
Ne tentez pas de réparer ce produit vous-même. Confiez toutes les opérations de maintenance
à des centres de service, installateurs, techniciens, revendeurs ou distributeurs agréés. Pour
contacter Bose Professional ou pour trouver un revendeur ou un distributeur près de chez vous,
rendez-vous à l’adresse PRO.BOSE.COM.
1. Veuillez lire ces consignes.
2. Veuillez conserver ces consignes.
3. Respectez tous les avertissements.
4. Suivez toutes les consignes.
5. N’utilisez pas cet appareil à proximité d’eau ou de toute autre source d’humidité (MB210
seulement).
6. Utilisez uniquement un chion sec pour le nettoyage (MB210 seulement).
7. Ne bloquez jamais les orifices d’aération. Suivez les instructions du fabricant pour
l’installation.
8. N’installez pas cet appareil à proximité d’une quelconque source de chaleur, telle
qu’un radiateur, une arrivée d’air chaud, un four ou tout autre appareil (notamment les
amplificateurs) produisant de la chaleur.
9. Utilisez uniquement les accessoires spécifiés par le fabricant.
10. Utilisez uniquement le chariot, le support, le trépied, l’équerre ou la table
spécifié(e) par le fabricant ou vendu(e) avec l’appareil. Si vous utilisez un
chariot, faites attention à ne pas faire basculer l’ensemble chariot/appareil.
AVERTISSEMENTS/PRÉCAUTIONS:
Certaines petites pièces présentent un risque de suocation. Ne les laissez pas à la
portée des enfants de moins de 3ans.
Ce produit contient des composants magnétiques. Consultez votre médecin afin de
savoir si ces composants peuvent avoir une incidence sur tout dispositif médical
implanté.
Tous les produits Bose doivent être installés dans le respect des réglementations locales et
nationales. L’installateur est responsable du respect de tous les codes et règlements locaux et
nationaux en vigueur applicables à l’installation et au montage des enceintes. Consultez les
autorités locales compétentes avant d’installer ce produit.
Tout montage non sécurisé d’une lourde charge peut provoquer des dégâts matériels et
des blessures graves, voire la mort. Il en va de la responsabilité de l’installateur d’évaluer la
fiabilité de la méthode de montage utilisée, en fonction de l’application. Seul un installateur
professionnel connaissant les accessoires et techniques de montage adaptés est qualifié pour
installer des enceintes suspendues.
Ne montez pas le produit dans des endroits où de la condensation peut se former (MB210
seulement).
Ce produit n’est pas destiné à être monté ou utilisé dans des installations humides en intérieur
(par exemple piscine intérieure, parc aquatique intérieur, baignoire à remous, sauna, hammam,
patinoire intérieure, etc.) (MB210 seulement).
Utilisez uniquement les accessoires de montage fournis avec ce produit.
Le kit de montage mural MB210 ne doit être utilisé qu'avec le modèle MB210.
Le kit de montage mural MB210-WR ne doit être utilisé qu'avec le modèle MB210-WR.
Veillez à ne pas installer sur des surfaces peu résistantes ou dans lesquelles peuvent être
intégrés des fils électriques ou des tuyaux de plomberie. En cas de doute, faites appel à
un installateur professionnel. Veillez à installer le support conformément aux normes de
construction locales.
N’utilisez aucun type de solvant, d’huile de graissage ou de produit de nettoyage à base
d’hydrocarbure sur ou autour des enceintes Bose et du matériel de montage associé pendant
l’installation. L’utilisation de ces solvants, huiles de graissage et produits de nettoyage à
base d’hydrocarbure sur ou autour des fixations de montage et des vis peut entraîner une
dégradation du matériel en plastique et occasionner de potentielles fissures ou une défaillance
prématurée du produit.
Tenez le produit à l’écart du feu et des sources de chaleur. Ne placez JAMAIS d’objets
enflammés, tels que des bougies allumées, sur l’appareil ou à proximité.
Informations réglementaires
Ce produit est conforme à toutes les directives de la Communauté Européenne qui
s’y appliquent. L’attestation complète de conformité est disponible à l’adresse
www.Bose.com/compliance.
Ce symbole signifie que le produit ne doit pas être jeté avec les déchets ménagers,
mais doit être déposé dans un centre de collecte approprié pour recyclage. La mise
au rebut adéquate et le recyclage permettent de protéger les ressources naturelles,
la santé humaine et l’environnement. Pour plus d’informations sur l’élimination et
le recyclage de ce produit, contactez votre mairie, votre service d’enlèvement des
ordures ou le magasin où vous avez acheté ce produit.
Date de fabrication: Le huitième chire du numéro de série indique l’année de fabrication;
par exemple, «7» correspond à 2007 ou à 2017.
Importateur pour la Chine: Bose Electronics (Shanghai) Company Limited, Part C, Plan 9,
No. 353 North Riying Road, China (Shanghai) Pilot Free Trade Zone
Importateur pour l’UE: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, Pays-Bas
Importateur pour le Mexique: Bose de México, S. de R.L. de C.V. , Paseo de las Palmas 405-204,
Lomas de Chapultepec, 11000 México, D.F.
Pour plus d’informations sur l’importateur et le service : [phone]
Importateur pour Taïwan: Bose Taiwan Branch, 9F-A1, No. 10, Section 3, Minsheng East Road,
Taipei City 104, Taïwan. Numéro de téléphone: [phone]
Neutrik est une marque déposée de Neutrik AG.
Bose et ArenaMatch sont marques commerciales de Bose Corporation.
Siège de Bose Corporation: 1-877-230-5639
©2018 Bose Corporation. Toute reproduction, modification, distribution ou autre utilisation,
même partielle, de ce document est interdite sans autorisation écrite préalable.
Informations relatives à la garantie
Cet appareil est couvert par une garantie limitée.
Pour en savoir plus sur la garantie, consultez la page PRO.BOSE.COM.

PRO.BOSE.COM
Installationsanleitung • MB210/MB210-WR
Deutsch •5
Wichtige Sicherheitshinweise
Bitte lesen Sie alle Sicherheitshinweise und Gebrauchsanleitungen durch
und bewahren Sie sie auf.
Dieses Produkt darf nur von fachkundigen Monteuren installiert werden! Dieses Dokument
soll fachkundigen Monteuren grundlegende Installations- und Sicherheitsrichtlinien für dieses
Produkt in typischen Festinstallationssystemen bieten. Bitte lesen Sie dieses Dokument und alle
Sicherheitshinweise vor der Installation durch.
Versuchen Sie nicht, dieses Produkt selbst zu warten. Lassen Sie jegliche Reparatur- und
Wartungsarbeiten nur von autorisierten Servicepartnern, Monteuren, Technikern, Händlern oder
Vertreibern durchführen. Die Bose Professional Kontaktdaten für Ihr Land sowie Informationen
zu Händlern oder Vertreibern in Ihrer Nähe finden Sie auf PRO.BOSE.COM.
1. Lesen Sie die folgenden Anweisungen.
2. Bewahren Sie die Anweisungen auf.
3. Beachten Sie alle Warn- und Sicherheitshinweise.
4. Befolgen Sie alle Anweisungen.
5. Verwenden Sie dieses Gerät nicht in der Nähe von Wasser (nur MB210).
6. Reinigen Sie das Gerät nur mit einem sauberen, trockenen Tuch (nur MB210).
7. Achten Sie darauf, dass die Lüftungsönungen nicht blockiert sind. Stellen Sie das Gerät
nur in Übereinstimmung mit den Herstelleranweisungen auf.
8. Stellen Sie das Gerät nicht in der Nähe von Wärmequellen auf, wie zum Beispiel Heizkörpern,
Wärmespeichern, Öfen oder anderen Geräten (auch Verstärkern), die Wärme erzeugen.
9. Verwenden Sie nur Zubehör-/Anbauteile, die vom Hersteller zugelassen sind.
10. Verwenden Sie für das Gerät nur Rollwagen, Ständer, Dreibeine, Halterungen
oder Tische, die vom Hersteller zugelassen sind oder zusammen mit dem
Gerät verkauft werden. Falls Sie einen Rollwagen verwenden, dürfen Sie die
Einheit aus Gerät und Rollwagen nur mit Vorsicht bewegen, damit
Verletzungen durch ein mögliches Umkippen ausgeschlossen sind.
WARNHINWEISE:
Enthält kleine Teile, die verschluckt werden können und eine Erstickungsgefahr
darstellen. Nicht geeignet für Kinder unter drei Jahren.
Dieses Produkt enthält magnetische Materialien. Wenden Sie sich an Ihren Arzt,
wenn Sie wissen möchten, ob dies den Betrieb Ihres implantierten medizinischen
Geräts beeinflussen kann.
Alle Produkte von Bose müssen gemäß den örtlichen und staatlichen Vorschriften sowie
gemäß allen Branchenbestimmungen installiert werden. Der Monteur ist dafür verantwortlich,
sicherzustellen, dass die Installation der Lautsprecher und der Halterung gemäß allen geltenden
Vorschriften durchgeführt wird, einschließlich örtlicher Bauvorschriften und -bestimmungen.
Wenden Sie sich vor der Installation dieses Produkts an die zuständige abnehmende Behörde.
Eine unsichere Befestigung schwerer Lasten oder deren Aufhängung über Kopf kann zu
schweren oder tödlichen Verletzungen und Sachschäden führen. Der Monteur ist dafür
verantwortlich, die Zuverlässigkeit der für die Anwendung verwendeten Befestigungstechniken
zu prüfen. Nur fachkundige Monteure mit Wissen über sachgemäße Befestigungselemente und
sichere Befestigungstechniken sollten Lautsprecher über Kopf installieren.
Montieren Sie das Produkt nicht an Orten, an denen Kondenswasser auftreten kann (nur MB210).
Dieses Produkt ist nicht für die Installation oder Verwendung in Bereichen mit
Wassereinrichtungen in Innenräumen (zum Beispiel Schwimmbädern, Wasserparks, Räume mit
Whirlpools, Saunas, Dampfbäder und Eislaufbahnen) gedacht (nur MB210).
Verwenden Sie nur die mit diesem Produkt mitgelieferten Befestigungsmittel.
Das Wandmontagekit MB210 ist nur für das Modell MB210 geeignet.
Das Wandmontagekit MB210-WR ist nur für das Modell MB210-WR geeignet.
Bei der Montage ist auf eine tragfähige Oberfläche zu achten, in deren Nähe sich keine
gefährlichen Einrichtungen wie strom- oder wasserführende Leitungen befinden. Wenn Sie
Bedenken haben, ziehen Sie einen qualifizierten Fachmann zu Rate. Achten Sie darauf, dass die
Halterung gemäß den örtlichen Bauvorschriften angebracht ist.
Verwenden Sie keine auf Kohlenwassersto basierenden Lösungsmittel, Schmiermittel oder
Reinigungsmittel am oder in der Nähe des Bose Lautsprechers oder während der Installation
mit dem zugehörigen Montagematerial. Diese Mittel können den Kunststo des Lautsprechers
und der Montagevorrichtungen angreifen und zu Rissen im Material und somit zu einem
(vorzeitigen) Produktdefekt führen.
Halten Sie das Produkt von Feuer und Wärmequellen fern. Stellen Sie KEINE brennenden
Kerzen oder ähnliches auf das Gerät oder in die Nähe des Geräts.
Gesetzliche Hinweise
Dieses Produkt erfüllt alle vorgeschriebenen EU-Richtlinien. Die vollständige
Konformitätserklärung ist einsehbar unter www.Bose.com/compliance.
Dieses Symbol bedeutet, dass das Produkt nicht mit dem Hausmüll entsorgt werden
darf, sondern bei einer geeigneten Sammelstelle für das Recycling abgegeben
werden muss. Die ordnungsgemäße Entsorgung und das Recycling tragen dazu bei,
die natürlichen Ressourcen, die Gesundheit und die Umwelt zu schützen. Weitere
Informationen zur Entsorgung und zum Recycling dieses Produkts erhalten Sie von
Ihrer zuständigen Kommune, Ihrem Entsorgungsdienst oder dem Geschäft, in dem
Sie dieses Produkt gekauft haben.
Herstellungsdatum: Die achte Zier in der Seriennummer gibt das Herstellungsjahr an: „7“ ist
2007 oder 2017.
Importeur aus China: Bose Electronics (Shanghai) Company Limited, Part C, Plan 9,
No. 353 North Riying Road, China (Shanghai) Pilot Free Trade Zone
Importeur aus der EU: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, Niederlande
Importeur aus Mexiko: Bose de México, S. de R.L. de C.V., Paseo de las Palmas 405-204, Lomas
de Chapultepec, 11000 México, D.F.
Importeur- und Serviceinformationen erhalten Sie unter: [phone]
Importeur aus Taiwan: Bose Taiwan Branch, 9F-A1, No. 10, Section 3, Minsheng East Road,
Taipei City 104, Taiwan. Tel.:[phone]7676
Neutrik ist eine eingetragene Marke von Neutrik AG.
Bose und ArenaMatch sind Marken von Bose Corporation.
Hauptsitz der Bose Corporation: 1-877-230-5639
©2018 Bose Corporation. Dieses Dokument darf ohne vorherige schriftliche Genehmigung
weder ganz noch teilweise reproduziert, verändert, vertrieben oder in anderer Weise
verwendet werden.
Garantiehinweise
Für dieses Produkt gilt eine eingeschränkte Garantie.
Einzelheiten zur Garantie finden Sie unter PRO.BOSE.COM.

PRO.BOSE.COM
MB210/MB210-WR • Guida all’installazione
6 •Italiano
Informazioni importanti sulla sicurezza
Leggere e conservare tutte le istruzioni per la sicurezza e per l'uso.
Questo prodotto deve essere installato esclusivamente da installatori professionisti! Il
presente documento ha lo scopo di fornire agli installatori professionisti le istruzioni di base
per l’installazione e la sicurezza del prodotto in tipici impianti da installazione fissa. Prima
dell’installazione, leggere questo documento e le avvertenze sulla sicurezza.
Non tentare di riparare il prodotto autonomamente. Per tutti gli interventi di assistenza, rivolgiti ai
centri assistenza, agli installatori, ai tecnici, ai rivenditori o ai distributori autorizzati. Per contattare
Bose Professional o per trovare il rivenditore o distributore più vicino, visita PRO.BOSE.COM.
1. Leggere queste istruzioni.
2. Conservare queste istruzioni.
3. Prestare attenzione a tutte le avvertenze.
4. Seguire tutte le istruzioni.
5. Non utilizzare l'apparecchio in prossimità di acqua (solo MB210).
6. Per la pulizia utilizzare un semplice panno asciutto (solo MB210).
7. Non ostruire le aperture di ventilazione. Installare il prodotto in conformità con le istruzioni
fornite dal produttore.
8. Non installare in prossimità di fonti di calore, quali termosifoni, radiatori, stufe o altri
apparecchi (compresi gli amplificatori) che generino calore.
9. Utilizzare solo sistemi di fissaggio/accessori specificati dal produttore.
10. Utilizzare solo carrelli, supporti, treppiedi, stae o tavoli specificati dal
produttore o venduti insieme all'apparecchio. Quando si utilizza un carrello,
prestare attenzione durante lo spostamento dell'insieme carrello/apparecchio
per evitare di rovesciarlo causando danni.
AVVISI/AVVERTENZE:
Contiene pezzi di piccole dimensioni che possono rappresentare un pericolo di
soocamento. Non adatto per bambini di età inferiore a 3 anni.
Questo prodotto contiene materiale magnetico. Rivolgersi al proprio medico per
eventuali domande sui possibili eetti del prodotto sui dispositivi medici impiantati
nel corpo umano.
Tutti i prodotti Bose devono essere installati in conformità con gli standard locali, statali, federali e
di settore. È responsabilità dell’installatore assicurare che l’installazione dei diusori e del sistema
di montaggio venga eseguita in conformità con le normative vigenti, compresi i regolamenti
edilizi locali. Prima di installare il prodotto, chiedere informazioni all’autorità locale preposta.
L’installazione non sicura o la sospensione di carichi pesanti può causare gravi lesioni alle
persone e danni alle cose. È responsabilità dell’installatore valutare l’adabilità del metodo di
installazione utilizzato per l’applicazione specifica. L’installazione di un diusore in posizione
elevata può essere adata solo ad installatori professionisti esperti di tecniche di montaggio
sicuro dell’hardware.
Non posizionare il prodotto in punti dove potrebbe formarsi condensa (solo MB210).
Questo prodotto non deve essere installato o utilizzato in aree di servizio o intrattenimento
vicine all’acqua (ad esempio, piscine coperte, parchi acquatici al chiuso, sale con vasche
riscaldate, saune, bagni turchi e piste di pattinaggio al chiuso) (solo MB210).
Utilizzare unicamente gli accessori di montaggio forniti con il prodotto.
Il kit di montaggio a parete MB210 può essere utilizzato solo con il modello MB210.
Il kit di montaggio a parete MB210-WR può essere utilizzato solo con il modello MB210-WR.
Non eseguire l’installazione su superfici non sucientemente robuste o dietro le quali si
nascondono elementi potenzialmente pericolosi, quali cavi elettrici o tubazioni idrauliche.
In caso di dubbi durante l’installazione della staa, contattare un installatore professionista.
Verificare che la staa sia installata in accordo ai parametri costruttivi locali.
Non utilizzare solventi a base di idrocarburi, lubrificanti o detergenti di qualunque tipo su o
intorno ai diusori Bose e sui relativi hardware di montaggio durante l’installazione. L’impiego di
detergenti, lubrificanti e solventi a base di idrocarburi su o intorno a viti ed elementi di ancoraggio
può danneggiare i materiali plastici e provocare spaccature e danni prematuri del prodotto.
Tenere il prodotto lontano dal fuoco e da fonti di calore. NON collocare sorgenti di fiamme
libere (ad esempio, candele accese) sul prodotto o in prossimità di esso.
Informazioni sulle normative
Questo prodotto è conforme a tutte le direttive EU prescritte dalla legge. La
dichiarazione di conformità completa è disponibile all’indirizzo
www.Bose.com/compliance.
Questo simbolo indica che il prodotto non deve essere smaltito con i rifiuti domestici,
ma deve essere consegnato a una struttura di raccolta appropriata per il riciclaggio.
Uno smaltimento e un riciclo corretti aiutano a preservare le risorse naturali, la salute
e l'ambiente. Per ulteriori informazioni sullo smaltimento e sul riciclo di questo
prodotto, rivolgersi alle autorità locali, al servizio di smaltimento dei rifiuti o al
negozio presso il quale è stato acquistato.
Data di produzione: l'ottava cifra del numero di serie corrisponde all'anno di produzione; ad
esempio "7" indica 2007 o 2017.
Importatore per la Cina: Bose Electronics (Shanghai) Company Limited, Part C, Plan 9,
No. 353 North Riying Road, China (Shanghai) Pilot Free Trade Zone
Importatore per l'UE: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, Paesi Bassi
Importatore per il Messico: Bose de México, S. de R.L. de C.V. , Paseo de las Palmas 405-204,
Lomas de Chapultepec, 11000 México, D.F.
Per informazioni su importatori e servizi: [phone]
Importatore per Taiwan: Bose Taiwan Branch, 9F-A1, No.10, Section 3, Minsheng East Road,
Taipei City 104, Taiwan. N. telefono: [phone]
Neutrik è un marchio registrato di Neutrik AG.
Bose e ArenaMatch sono marchi di Bose Corporation.
Sede principale di Bose Corporation: 1-877-230-5639
©2018 Bose Corporation. Nessuna parte di questo documento può essere riprodotta,
modificata, distribuita o usata in altro modo senza previa autorizzazione scritta.
Informazioni sulla garanzia
Questo prodotto è coperto da una garanzia limitata.
Per i dettagli sulla garanzia, visitare PRO.BOSE.COM.

PRO.BOSE.COM
Installatiehandleiding •MB210/MB210-WR
Nederlands •7
Belangrijke veiligheidsinstructies
Lees alle veiligheidsinstructies en de gebruiksaanwijzing door en bewaar
deze.
Dit product is uitsluitend bestemd voor installatie door professionele installateurs!
Dit document is bedoeld om professionele installateurs essentiële installatie- en
veiligheidsrichtlijnen te bieden voor dit product in standaardsystemen voor vaste installatie. Lees
dit document en alle veiligheidswaarschuwingen voordat u een systeem probeert te installeren.
Probeer dit product niet zelf te repareren. Neem voor alle onderhoud contact op met een
geautoriseerd servicecenter, installateur, technicus, dealer of distributeur. Om contact op te
nemen met Bose Professional en voor informatie over de dichtstbijzijnde dealer of distributeur,
gaat u naar PRO.BOSE.COM.
1. Lees deze instructies door.
2. Bewaar deze instructies.
3. Neem alle waarschuwingen in acht.
4. Volg alle instructies.
5. Gebruik dit apparaat niet in de buurt van water (alleen MB210).
6. Alleen met een droge doek reinigen (alleen MB210).
7. Zorg dat u de ventilatieopeningen niet blokkeert. Installeer het apparaat volgens de
instructies van de fabrikant.
8. Installeer het product niet in de buurt van warmtebronnen, zoals radiatoren, warmteroosters,
kachels of andere apparaten (waaronder versterkers) die warmte produceren.
9. Gebruik uitsluitend aansluitstukken/accessoires die door de fabrikant worden gespecificeerd.
10. Gebruik het apparaat uitsluitend in combinatie met het verrijdbare plateau,
het statief, de beugel of de tafel die door de fabrikant worden vermeld of
samen met het apparaat worden verkocht. Als u een verrijdbaar plateau
gebruikt, moet u het apparaat en het plateau voorzichtig verplaatsen zodat
deze niet kunnen omvallen en letsel veroorzaken.
WAARSCHUWINGEN:
Bevat kleine onderdelen die verstikkingsgevaar kunnen vormen. Niet geschikt voor
kinderen jonger dan 3 jaar.
Dit product bevat magnetisch materiaal. Raadpleeg uw arts om te vragen of dit
invloed kan hebben op uw implanteerbare medische hulpmiddel.
Alle Bose-producten moeten worden geïnstalleerd volgens de plaatselijke en landelijke
voorschriften en industrienormen. Het is de verantwoordelijkheid van de installateur om
ervoor te zorgen dat de installatie van de luidsprekers en het montagesysteem gebeurt
met inachtneming van alle van toepassing zijnde voorschriften, waaronder plaatselijke
bouwvoorschriften. Neem contact op met de juiste plaatselijke overheidsinstanties voordat u
dit product installeert.
Het onveilig monteren of ophangen van een zware last kan leiden tot beschadiging van uw
eigendommen, ernstig letsel en overlijden. Het is de verantwoordelijkheid van de installateur
om de betrouwbaarheid te evalueren van de gebruikte montagemethode. Alleen professionele
installateurs met kennis van het juiste gereedschap en veilige montagetechnieken mogen
luidsprekers hoog ophangen.
Monteer het product niet op locaties waar condensatie kan optreden (alleen MB210).
Dit product is niet bedoeld voor installatie of gebruik in overdekte ruimten voor
wateractiviteiten (waaronder overdekte zwembaden, overdekte waterparken, stoomruimten,
sauna’s, bubbelbadkamers en overdekte ijsbanen) (alleen MB210).
Gebruik uitsluitend het montagemateriaal dat bij dit product is bijgeleverd.
De wandmontagekit MB210 is alleen voor gebruik met model MB210.
De wandmontagekit MB210-WR is alleen voor gebruik met model MB210-WR.
Niet bevestigen aan oppervlakken die niet sterk zijn of die mogelijke risico’s opleveren,
bijvoorbeeld vanwege elektrische bedrading of waterleidingen. Als u niet zeker weet hoe de
beugel moet worden bevestigd, raadpleegt u een bevoegde installateur. Zorg ervoor dat de
beugel wordt bevestigd volgens de plaatselijke bouwvoorschriften.
Gebruik bij de installatie geen oplosmiddelen, smeermiddelen of reinigingsmiddelen op
koolwaterstofbasis op of rond Bose-luidsprekers en bijbehorende montagematerialen.
Het gebruik van dergelijke smeermiddelen, oplosmiddelen of reinigingsmiddelen op
koolwaterstofbasis op of rond de bevestigingsankers en schroeven kan nadelige gevolgen
hebben voor het kunststof materiaal en mogelijk scheuren en vroegtijdige verzwakking van het
product veroorzaken.
Houd het product uit de buurt van vuur en warmtebronnen. Plaats GEEN open vlammen, zoals
brandende kaarsen, op of bij het product.
Wettelijk verplichte informatie
Dit product voldoet aan alle vereisten van de EU-richtlijnen, zoals wettelijk vereist.
De volledige conformiteitsverklaring kunt u vinden op www.Bose.com/compliance.
Dit symbool betekent dat het product niet mag worden weggegooid als
huishoudelijk afval en naar een geschikt inzamelpunt voor recycling moet worden
gebracht. Het op de juiste wijze afvoeren en recyclen helpt natuurlijke
hulpbronnen, de menselijke gezondheid en het milieu te beschermen. Voor meer
informatie over het afvoeren en recyclen van dit product neemt u contact op met
de gemeente waar u woont, de afvalverwerkingsdienst of de winkel waar u dit
product hebt gekocht.
Fabricagedatum: Het achtste cijfer in het serienummer geeft het fabricagejaar aan. ‘7’ is 2007
of 2017.
Importeur in China: Bose Electronics (Shanghai) Company Limited, Part C, Plan 9,
No. 353 North Riying Road, China (Shanghai) Pilot Free Trade Zone
Importeur in de EU: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, Nederland
Importeur in Mexico: Bose de México, S. de R.L. de C.V. , Paseo de las Palmas 405-204, Lomas de
Chapultepec, 11000 México, D.F. Gegevens importeur en service-informatie: [phone]
Importeur in Taiwan: Bose Taiwan Branch, 9F-A1, No.10, Section 3, Minsheng East Road,
Taipei City 104, Taiwan. Telefoonnummer: [phone]
Neutrik is een geregistreerd handelsmerk van Neutrik AG.
Bose en ArenaMatch zijn handelsmerken van Bose Corporation.
Hoofdkantoor Bose Corporation: 1 877 230 5639
©2018 Bose Corporation. Niets in deze uitgave mag worden gereproduceerd, gewijzigd,
gedistribueerd of op andere wijze worden gebruikt zonder voorafgaande schriftelijke
toestemming.
Garantie-informatie
Dit product wordt gedekt door een beperkte garantie.
Ga naar PRO.BOSE.COM voor garantie-informatie.

8 •English
MB210/MB210-WR •Installation Guide
PRO.BOSE.COM
Contents
Overview 9
Product Features .......................................................................................................................................................................................9
Package Contents .....................................................................................................................................................................................9
Product Warning........................................................................................................................................................................................9
Inspection & Maintenance.................................................................................................................................................................... 10
Maintaining Weather Resistance ............................................................................................................................................... 10
Recommended Tools ............................................................................................................................................................................. 10
Product Dimensions .................................................................................................................................................................................11
MB210 .....................................................................................................................................................................................................11
MB210-WR ...........................................................................................................................................................................................12
Input Panel ..................................................................................................................................................................................................13
MB210 ....................................................................................................................................................................................................13
MB210-WR ...........................................................................................................................................................................................13
Installation 14
MB210........................................................................................................................................................................................................... 14
Mounting the Subwoofer with the U-Bracket ...................................................................................................................... 14
Using the Ground Feet ...................................................................................................................................................................15
MB210-WR...................................................................................................................................................................................................16
Mounting the Subwoofer with the U-bracket .......................................................................................................................16
Recommended Amplifier Power........................................................................................................................................................17
Recommended Signal Processing.....................................................................................................................................................17
Technical Specifications 18
MB210............................................................................................................................................................................................................18
MB210-WR...................................................................................................................................................................................................19

English •9
Installation Guide •MB210/MB210-WR
PRO.BOSE.COM Overview
Overview
Bose Professional MB210 compact subwoofers are designed for background/foreground music and small
sound-reinforcement systems that require low-frequency extension down to 37 Hz. The MB210 subwoofer
features two (2) 10-inch high-excursion woofers, derived from the award-winning Bose Professional F1
portable, powered subwoofer, in a compact, Baltic-birch plywood enclosure optimized for fixed-installation
applications. Featuring outstanding performance to size ratio, the MB210 is designed to complement
Bose Professional FreeSpace, Panaray, RoomMatch Utility, and ArenaMatch Utility loudspeaker models
with additional bass impact.
Product Features
2 × 10” high-excursion woofers for high-output bass in a compact enclosure. Transducers derived from
award-winning Bose F1 portable, powered subwoofer
500 W long-term power handling for high sound output and reliability
Low-frequency extension down to 37 Hz
123 dB maximum continuous SPL, 129 dB peak SPL
Baltic Birch plywood enclosure with compact size for installations
Polyurethane paint available in black or white (MB210)
Outdoor-rated 2-part polyurethane finish available in black or white (MB210-WR)
U-bracket included for easy mounting to walls or ceiling
Package Contents
Each compact subwoofer carton includes the following:
MB210 MB210-WR
Subwoofer 1 1
U-bracket 1 1
M8 screws 4 4
M4 screws — 4
Input cover — 1
Stick-on ground feet 4 —
4-pin Euroblock 1 —
Rubber washers 4 4
T3 square drive 1 1
Product Warning
The MB210-WR compact subwoofer is rated IP55 and is designed for outdoor environments.
WARNING: The MB210 compact subwoofer is NOT intended for outdoor environments. If the MB210 is
exposed to water or moisture, the integrity of the subwoofer will be compromised.

10 •English
MB210/MB210-WR •Installation Guide
PRO.BOSE.COM
Overview
Inspection & Maintenance
WARNING: The loudspeaker and all mounting components must be inspected annually by a qualified
professional who is trained and certified in suspending loudspeaker systems. All rigging parts and
components used in the suspension of the loudspeaker system should be visually inspected for signs
of cracking, bending, water damage, corrosion, de-lamination, or any other condition that could
comprise the system's integrity and create a dangerous falling hazard.
Maintaining Weather Resistance
The MB210-WR compact subwoofer is water resistant and is rated IP55. To maintain water resistance, please
observe the following precautions:
1. Before, during, and after installation, check the surface of the loudspeaker enclosure to ensure that the
factory-applied, weather-resistant coating has not been damaged.
2. During install, angle the loudspeaker at least 5° downward to reduce the potential of rain compromising the
performance of the loudspeaker.
3. All mounting holes must be sealed o with stainless steel screws (included with applicable accessories) or
the included plastic plugs (pre-installed).
4. The gland nut that secures the loudspeaker cable is factory sealed. Do not remove the gland nut or the
weather-resistant seal will be broken.
5. The loudspeaker is rated IP55, which means the grille is designed to withstand normal and wind-driven rain.
The grille is not designed to withstand direct spraying of water (i.e. from a hose).
CAUTION: If the above instructions are not observed, the weather-resistant integrity of your MB210-WR
compact subwoofer could be compromised.
Recommended Tools
The following tools are recommended for assembly of a MB210/MB210-WR compact subwoofer:
Flathead screwdriver
#2 Phillips-head screwdriver
10-millimeter socket or wrench
5-millimeter hex key
T3 square drive (included)

English •11
Installation Guide •MB210/MB210-WR
PRO.BOSE.COM Overview
Product Dimensions
MB210
Product net weight: 18.6 kg (41.0 lb) / 21.8 kg (48.0 lb) with U-bracket
Top View Side View
Front View Rear View
No Bracket
Bottom View Rear View
Bracket Only
685 mm
27.0 in
450 mm
17.7 in
32 mm
1.3 in
114 mm
4.5 in
77 mm
3.0 in
100 mm
3.9 in
203 mm
8.0 in
300 mm
11.8 in
668 mm
26.3 in
291 mm
11.5 in
659 mm
26.0 in

12 •English
MB210/MB210-WR •Installation Guide
PRO.BOSE.COM
Overview
MB210-WR
Product net weight: 19.4 kg (42.8 lb) / 23.0 kg (50.6 lb) with U-bracket
Top View Side View
Front View Rear View
No Bracket
Bottom View Rear View
Bracket Only
685 mm
27.0 in
447 mm
17.6 in
70 mm
2.8 in
114 mm
4.5 in
77 mm
3.0 in
100 mm
3.9 in
203 mm
8.0 in
300 mm
11.8 in
671 mm
26.4 in
291 mm
11.5 in
659 mm
26.0 in
184 mm
7.3 in

English •13
Installation Guide •MB210/MB210-WR
PRO.BOSE.COM Overview
Input Panel
MB210
qEuroblock Connector (4-pin)
wNL4 connectors
MB210-WR
The input panel for the MB210-WR includes a single screw-terminal barrier strip. Each terminal accepts a wire
gauge of 10 AWG to 18 AWG.
+
–
+
–
LF
INPUT
THRU
qBarrier strip
q w
q

14 •English
MB210/MB210-WR •Installation Guide
PRO.BOSE.COM
Installation
Installation
MB210
Mounting the Subwoofer with the U-Bracket
1. Choose a mounting location that will safely support the weight of the subwoofer. The subwoofer can be
mounted horizontally or vertically.
2. Remove packing materials and place the subwoofer on the floor beneath the planned suspension point.
3. Determine which threaded holes on the subwoofer are required for mounting, depending on the
subwoofer’s mounting orientation. See the following figures.
4. Using the included T3 square drive, remove the plastic inserts from the appropriate threaded holes on each
side of the subwoofer.
5. Insert one M8 screw and rubber washer into the threaded inserts that correspond to your chosen
attachment points on each side of the subwoofer. Do not tighten.
Note: Use only the included hardware to attach the U-bracket to the subwoofer.
6. Use the U-bracket as a guide to mark the fastening holes on the mounting surface.
7. Drill holes into the mounting surface using previously marked positions.
8. Attach the U-bracket to the building surface using appropriate fasteners (not included).
CAUTION: For attaching U-brackets to a surface, choose fasteners that are consistent with all local
building codes and requirements to support the weight of the subwoofer.
9. Place the subwoofer on the bracket by sliding the attached M8 screws into the bracket slots, keeping the
rubber washers between the bracket and the speaker enclosure.
10. Insert one M8 screw and rubber washer into the remaining threaded hole, on each side of the subwoofer.
Place the washer between the U-bracket and the subwoofer.
11. Tighten the four screws with a 10-millimeter socket tool, using a torque not to exceed 13.6 to 20.3
newton·meters (10 to 15 pound·feet).
12. Connect your wiring to your subwoofer.

English •15
Installation Guide •MB210/MB210-WR
PRO.BOSE.COM Installation
Using the Ground Feet
The MB210 subwoofer can be placed on the ground in either the horizontal or vertical orientation, using the
ground feet. To attach the ground feet:
1. Remove the backing from the adhesive side of the first ground foot.
2. Position the ground foot in one corner of the loudspeaker, on the side that will be resting on the floor. See
the figures below.
3. Press the adhesive side of the ground foot onto the loudspeaker to adhere.
4. Repeat steps for the remaining three ground feet.
Ground feet position for horizontal orientation
Ground feet position for vertical orientation

16 •English
MB210/MB210-WR •Installation Guide
PRO.BOSE.COM
Installation
MB210-WR
Mounting the Subwoofer with the U-bracket
CAUTION: Before installation, determine the location and position of your subwoofer. Only remove the
plastic inserts that are necessary for your installation. The plastic inserts are factory sealed to prevent
water damage. If any insert is left unsealed after installation, the weather-resistant integrity of your
subwoofer could be compromised.
1. Choose a mounting location that will safely support the weight of the subwoofer. The subwoofer can be
mounted horizontally or vertically.
2. Remove packing materials and place the subwoofer on the floor beneath the planned suspension point.
3. Determine which threaded holes on the subwoofer are required for mounting, depending on the
subwoofer’s mounting orientation. See the following figures.
4. Using the included T3 square drive, remove the plastic inserts from the appropriate threaded holes on each
side of the subwoofer.
5. Insert one M8 screw and rubber washer into the threaded inserts that correspond to your chosen
attachment points on each side of the subwoofer. Do not tighten.
Note: Use only the included hardware to attach the U-bracket to the subwoofer.
6. Hold the U-bracket in the mounting location and mark the holes.
7. Drill holes into the mounting surface using previously marked positions.
8. Attach the U-bracket to the building surface using appropriate fasteners (not included).
CAUTION: For attaching U-brackets to a surface, choose fasteners that are consistent with all local
building codes and requirements to support the weight of the subwoofer.
9. Connect your wiring to your subwoofer.
10. Feed the wiring through the gland nut on the input panel cover and tighten the gland nut.
11. Attach the input cover using the included M4 screws.
12. Place the subwoofer on the bracket by sliding the attached M8 screws into the bracket slots, keeping the
rubber washers between the bracket and the speaker enclosure.
13. Insert one M8 screw and rubber washer into the remaining threaded hole, on each side of the subwoofer.
Place the washer between the U-bracket and the subwoofer.
14. Tighten the four screws with a 10-millimeter socket tool, using a torque not to exceed 13.6 to 20.3
newton·meters (10 to 15 pound·feet).

English •17
Installation Guide •MB210/MB210-WR
PRO.BOSE.COM Installation
Recommended Amplifier Power
Selecting the proper amplifier size for a given loudspeaker requires analysis of the transducer long-term (or
RMS) power rating, dynamic range of the input-source material (crest factor), desired sound pressure levels,
and other factors. As a general guideline, to optimize MB210/MB210WR system performance, the following
amplifier configurations are recommended.
Loudspeaker Nominal Impedance Amp Power Rating
MB210 8 Ώ 500 W to 2000 W
MB210-WR 8 Ώ 500 W to 2000 W
Recommended Signal Processing
Digital signal processing (DSP) equipment is required for infrasonic protection, crossover, equalization, and
voltage limiting protection.
Recommended loudspeaker DSP presets are available in Bose ControlSpace Designer software and are
designed for use with Bose PowerMatch configurable professional amplifiers and ControlSpace ESP and EX
processor hardware (sold separately).

18 •English
MB210/MB210-WR •Installation Guide
PRO.BOSE.COM
Technical Specifications
Technical Specifications
MB210
System Performance
Frequency Response (±3 dB) 145 to 180 Hz
Frequency Range (–10 dB) 37 to 270 Hz
Nominal Coverage Pattern (H × V) Omni-directional below 200 Hz
Recommended High-pass Filter 45 Hz with 24-dB/octave filter
Crossover 80 to 200 Hz (requires active crossover in DSP)
Bose Extended Lifecycle Test 2AES Transducer Test 3
Power Handling, long-term continuous 500 W 625 W
Power Handling, peak 2000 W 2500 W
Free Field Half-space Free Field Half-space
Sensitivity (SPL / 1 W @ 1 m) 490 dB 96 dB 90 dB 96 dB
Calculated Maximum SPL @ 1 m 5117 dB 123 dB 118 dB 124 dB
Calculated Maximum SPL @ 1 m, peak 123 dB 129 dB 124 dB 130 dB
Transducers
Low Frequency 2 × Bose 10-inch, high-excursion woofers
Nominal Impedance 8 Ώ
Physical
Enclosure Material Baltic birch plywood
Finish Polyurethane coating, black or white
Grille Powder-coated perforated steel
Environmental Indoor only
Connectors 2 × Neutrik® NL4 with 4-pin Euroblock, all wired parallel
Suspension/Mounting 3 × M8 threaded inserts for U-bracket (per side)
Dimensions (H × W × D) – millimeters 291 × 685 × 482 with U-bracket
Dimensions (H × W × D) – inches 11.5 × 27.0 × 19.0 with U-bracket
Net Weight (loudspeaker only) 18.6 kg (41.0 lb)
Net Weight (with U-bracket) 21.8 kg (48.0 lb)
Shipping Weight 27.2 kg (59.9 lb)
Accessories Included steel U-bracket and 4 × adhesive-mounted rubber ground-stack feet
Footnotes
1. Frequency response and range measured on-axis in anechoic environment with recommended bandpass and EQ.
2. Bose extended-lifecycle test using pink noise filtered to meet IEC268-5, 6-dB crest factor, 500-hour duration.
3. AES standard 2-hour duration with IEC system noise.
4. Sensitivity measured in anechoic environment with recommended bandpass and EQ.
5. Maximum SPL calculated using sensitivity and power ratings, exclusive of power compression.

English •19
Installation Guide •MB210/MB210-WR
PRO.BOSE.COM Technical Specifications
MB210-WR
System Performance
Frequency Response (±3 dB) 145 to 180 Hz
Frequency Range (–10 dB) 37 to 270 Hz
Nominal Coverage Pattern (H × V) Omni-directional below 200 Hz
Recommended High-pass Filter 40 Hz with 24-dB/octave filter
Crossover —
Bose Extended Lifecycle Test 2AES Transducer Test 3
Power Handling, long-term continuous 500 W 625 W
Power Handling, peak 2000 W 2500 W
Free Field Wall/Ceiling Free Field Wall/Ceiling
Sensitivity (SPL / 1 W @ 1 m) 490 dB 96 dB 90 dB 96 dB
Calculated Maximum SPL @ 1 m 5117 dB 123 dB 118 dB 124 dB
Calculated Maximum SPL @ 1 m, peak 123 dB 129 dB 124 dB 130 dB
Transducers
Low Frequency 2 × Bose 10-inch, high-excursion woofers
Nominal Impedance 8 Ώ
Physical
Enclosure Material Exterior-grade birch plywood
Finish Two-part polyurethane coating, black or white
Grille Powder-coated perforated stainless steel, acoustic foam, stainless steel mesh
Environmental Rated for direct-exposure outdoor installations (IEC 60529: IP55)
Connectors 1 × barrier strip (accepts 10 to 18 wire gauge)
Suspension/Mounting 3 × M8 threaded inserts for U-bracket (per side)
Dimensions (H × W × D) – millimeters 291 × 685 × 517 with U-bracket
Dimensions (H × W × D) – inches 11.5 × 27.0 × 20.4 with U-bracket
Net Weight (loudspeaker only) 19.4 kg (42.8 lb)
Net Weight (with U-bracket) 23.0 kg (50.6 lb)
Shipping Weight 27.7 kg (61.1 lb)
Accessories Included stainless-steel U-bracket
Footnotes
1. Frequency response and range measured on-axis in anechoic environment with recommended bandpass and EQ.
2. Bose extended-lifecycle test using pink noise filtered to meet IEC268-5, 6-dB crest factor, 500-hour duration.
3. AES standard 2-hour duration with IEC system noise.
4. Sensitivity measured in anechoic environment with recommended bandpass and EQ.
5. Maximum SPL calculated using sensitivity and power ratings, exclusive of power compression.

©2018 Bose Corporation, All rights reserved.
Framingham, MA 01701-9168 USA
PRO.BOSE.COM
AM792735 Rev. 01
December 2018