Thank you for choosing Boss Audio
Thank you for ch
oosing
x This product is only intended to be used and
installed in +12 VDC, negaƟve ground
electrical systems.
x Before aƩempƟng to install any of the
components, plan the locaƟon, placement
and wiring.
x Before drilling or securing any components,
double check for gas lines, brake lines, gas
tank, moving parts, or any other vital vehicle
part.
x When making ele
ctrical connecƟons, it’s
Before InstallaƟon
Please read the user’s manual carefully before
iinstallation and use
recommended they be soldered and
protected w/heat shrink or electrical tape
Mirror SpecificaƟons
Sc
reen Size: 4.3”, 16:9
Aspect Rao
Resoluon: 480 x 234
Power Input: 12 VDC, ≥7 W
Input: 2 Video, Auto Switching for Rea
r View
Video System Support: NTSC/PAL
Operang Temperature: -50° F to +140° F
***Rear view camera must be connected to V2 Source
1) Mirror doesn't display the rear view
image when its engaged.
A) Rear view camera must be connected to
V2 source for it switch automacally.
2) he mirror won’t power up.
A) The red wire must be powered up with
ACC. The black wire must be grounded
properly.
3) mera doesn't turn on
A) The camera must be triggered with the
reverse signal from the vehicle. The
signal will be easily found from the re-
verse lights.
TroubleshooƟng