Boss Audio Systems BV9370B User manual

0519

System setting 8
Audio Setting 9
Media Setting 9
BT Setting 10
Time Setting 11
display Setting 11
Touch Setting 12
Version setting 13
Remote Control Operation
Specifications
Safty notice
Unit Installation
20
21
Wires Connection Description
Bluetooth Dialing
Bluetooth Call
Bluetooth Phone Call Log
Bluetooth Phonebook
Bluetooth Music
Bluetooth Device
4
Phone-Bluetooth Operation Menu 5
5
6
16
17
17
17
18
Congratulations on your purchase of a Boss Audio Systems
Multimedia Receiver.
It has been designed, engineered and manufactured to bring you
the highest level of performance and quality, and will offer you
years of entertainment pleasure.
R
Tuner
Camera/Aux in
5
6
7
8
USB/SD Playback-Audio/Video/Photo

BV9370B
6.5
Front,
100*178*132mm
871.5g/1.92Ibs
JPG
1
Format Video code Audio code

Please read and understand the following safety information before operating this unit.
The device is suitable for 12V power supply (requires grounding).Do not connect
it to 24V power supply in trucks or buses, or else it will be damaged.
Please use genuine discs instead of incompatible discs, or it will damage the
device and/or shorten the service life.
Without the guide of qualified personnel, do not replace the fuse, or else it may
damage the device or cause fire.
Please follow the traffic laws and regulations and do not watch programs or
operate the device when you are driving, to avoid accidents(excluding passengers
watching through rear monitor).
To ensure safety and operate the device normally, please ask qualified personnel
to install the device. Do not disassemble or repair the device without authorization,
to avoid damage and accidents. please contact a local car audio distributor
for details.
Do not put the device in a moist environment or water, to avoid electric shock,
damage and/or fire due to a short circuit.
The mechanicl drive part of the monitor uses an automatic precision transmission
component.Do not pull,push or rotate the device by force or impact the TFT
screen to avoid damaging the device.
Do not insert the audio plug of the vehicle into the master unit directly. Please
convert with the dedicated end cable provided by our company.
When installing the unit, prevent metal objects from falling into the master unit
from the vents to avoid a short circuit and damaging the device.
Safety Statement
For the safety of yourself and others, do not watch programs or operate the device
when you are driving. It is prohibited by law.
The back up monitor function should be used as an auxiliary view only. We are not
responsible for any accidents occurred during backing.

Qty 1 Remote control
Qty 1 Mounting Hardware Set
- Brackets (2)
- M5 x 6mm screws (8)
Qty 1 Trim ring
Qty 1 Power cable
1.Put the 2 brackets to the left and right side of the unit;
2.Use screws to fix the brackets to the unit.
3. Once the screws are attached, the brackets can be adjusted
forward or aft depending on the installation requirements.
Bracket
Bracket
Screw
UNIT INSTALLATION
ACCESSORIES

3
46
8
7
5
9
1.TURN ON/OFF
Press to turn on or turn off the unit.
2.MUTE
Press to mute the unit ,press
again to restore the volume.
3.MENU
Press to return to the home menu.
4.MODE
Press to change mode.
5.Direction and OK
Press to select previous/next
one under Video, Audio, Picture list
menu, press ok to confirm.
6.SEARCH
Press to automatic search under
Tuner mode.
7.
Tuner mode: long press to search backward, short press to auto
search backward
when bluetooth is calling in ,long press to receive call.
bluetooth mode: called out ,then hang up ,long press again to
call out.
8.
Tuner mode: long press to search forward, short press to auto
search forward
when bluetooth is calling in ,long press to hang up.
9.VOLUME UP/DOWN
Press to adjust the volume up and down.

WIRES CONNECTION DESCRIPTION
The Description of the Input/Output Interface
Pre-Amp Outputs
AM/FM
Antenna
SUB
SUB
FR
FL
RL RR
F-CAM R-CAM V-OUT
RADIO
A/V Input
Main
Harness
Power
Yellow................................... Constant (+12v)
Red..................................... Accessory (+12v)
Black.............................................. Ground (-)
Orange..................... Illumination Input (+12v)
Violet/Wht..................... Reverse Input (+12v)
Blue.................... Ant. Output (+12v, 500 mA)
Blue/Wht........... Rem. Output (+12v, 500 mA)
Lt.Green......................... Parking Brake Input
Control
3.5mm........................................... SWC Input
Speaker Outputs
White......................................... Left Front (+)
White/Blk.................................... Left Front (-)
Gray......................................... Right Front (+)
Gray/Blk................................... Right Front (-)
Green......................................... Left Rear (+)
Green/Blk.................................... Left Rear (-)
Purple...................................... Right Rear (+)
Purple/Blk................................. Right Rear (-)
Camera Power
Red/Violet......... (+12v, 500 mA)
Red/White......... (+12v, 500 mA)
5

1
1. BACK :
Back to previous source
2. MENU:
Press to return to the home menu
3. MODE:
Press to change mode.
5.Open to see SD lot,USB port ,AUX IN jack and reset key .
6

1.Press to go into main menu 2.
2.Tuner Interface
3.Streaming Interface
4.Phone Interface
5.USB Interface
6.Front Camera Interface
7.Rear Camera Interface
8.Aux In Interface
9.SD Interface
10.Setting
8 9
10
7
6
7
MAIN MENU OPERATION INSTRODUCTION

6
nine setting:
1. Area:Press to choose Europe, America, S.America
2. Language: Press to choose English /Espanol
3. Illumination: Turn on this button , when turn on the illumination,the
screen darkens; Turn off this button, when turn on the illumination,
the screen will not darken;
4. System tone: Choose to turn on or turn off the key sound.
5. Default volume:Press to set the volume of each boot.
6. EULA: If turn on , will prompt the user agreement; if turn off , will not
prompt the user agreement.
SYSTEM SETTING – Menu 1
8

1.EQ:Press to enter into EQ set up menu
1.Aspect Ratio: Press to select 16:9 wide screen or 4:3 pan scan
AUDIO SETTING Menu-2
MEDIA SETTING-Menu 3
9

6
7
1. Bluetooth:Turn on and turn off of bluetooth.
2. Name:Default Bluetooth name for this unit: Boss Audio BV9370B
3. Pin Code: Default password”0000”,and can be changed by yourself
click”0000”. When the mobile phone connects with the unit bluetooth,
need enter the pin code to connect .
4. Auto Connect：Turn on this button ,if phone bluetooth is turned on , will
connect device automatically.
5. Auto answer: Turn on this button ,when there is an incoming call,
will answer automatically
6. Auto loading phonebooks: Turn on this button, the unit will auto loading
the phonebooks.
7. Call volume: when turn on, can adjusts the volume in the call; after
turnning off the ACC, the Bluetooth volume has the memory of the last
tone;when turn off , will use the default volume .
BT SETTING-Menu 4
10
BV9370B

1. Display format: Press to set time mode: 12H /24H
2. Adjust:Press to adjust the time Hour /Minute.
TIME SETTING –Menu 5
DISPLAY SETTING –Menu 6
11

1. Backlight Adjust:
a.Adjust screen brightness under normal condition
b. Adjust screen brightness when turn on the illumination.
2. Wallpaper: Touch to set wallpaper.
1. Touch for Calibration: Press to calibrate the accuracy of touch screen
TOUCH SETTING –Menu 7
a
b
12

Show the software version information.
VERSION SETTING –Menu 8 BV9370B
13
System reset: Press to restore the factory setting.
70
BV9370B
BV9370B

TUNER
TUNER
1. Touch to go back to the home page
2.Show automatic search or manual search
3.Press to do automatic forward search,press again to pause search.
4.Long press to manual search,long press again to automatic search ,
short press to backward automatic search.
5.Long press to manual search,long press again to automatic search ,
short press to forward automatic search.
6. Press to turn on or turn off Stereo.
7. Press to choose local, short-range broadcast
8.Press to automatic search the last six frequencies which saved.
9.Press to choose FM / AM
10. Press to select the preset frequency, long press to save the current
radio frequency.
11.AF(Auto Frequency): Touch the button to turn the AF function on/off.
AF function id tumed on,When the received station signals become
weak,the radio will automatically fine-tune to other frequencies.When
receiving an emergency announcing, the screen will display waming
message.
12.TA(Traffic Announcement)
ON:When the taffic station is turned on,the radio will automatically
search for traffic stations.
OFF:Repress [TA] button to close TA function. In other modes,
traffic announcement will automatically switch to radio mode,after
the traffic announcement is completed,it will automatically switch
to the previou mode.
6
7
8
9
10
11
12
14

15
PHONE-BLUETOOTH OPERATION
BLUETOOTH OPERATION MENU
Click the phone icon to enter the bluetooth function interface:
1. keypad: Press to see the dialing keypad ,users can dial number,
then call out.
2. Call log: Press to see the Bluetooth call history.
3. Phonebooks: Press to see the Bluetooth Phonebooks.
4. Music:Press to enter Bluetooth music.
5. Device: Press to see the Bluetooth pairing device name .
1.Show the number you entered in .
2.Delete the wrong number
3.Touch to call out.
4.Number key area.
1
1
2
2
3
3
4
4
5

16
PHONE-BLUETOOTH OPERATION
LOG
1. Press to hang up the phone call
2. Press to mute or un-mute mic.
3. Touch to select talk though phone or through Bluetooth.

17
BLUETOOTH CALL LOG
1. Previous song
2. Play/Pause
3. Next song
1. Touch to sync phonebook
2. Touch to show the key, then can enter name to search
phone number
3. Contact list