Bowers & Wilkins DM570 User manual

DM570
Stand-mount/Bookshelf loudspeaker system
Product Summary
●The DM570 construction consists of a one piece moulded baffle design – in which
components are exactly appropriate to the size and expected performance. A performance
guided to perfection through the use of CAD, finite element analysis and laser interferometry
techniques.
●The two-way front vented system has a specially designed 8in bass/midrange driver of the
highest sophistication incorporating a high temperature Kapton voice coil which effectively
winds up to increase power handling.
Technical highlights
●B&W's Tweeter technology ensures that the sound remains focused and time sensitive and
that the stereo image is presented with unparalleled three dimensional accuracy.
●The cabinets feature a specially designed high density front baffle which achieves almost
Matrix-like stability in strengthening overall enclosure construction. The bevel edges of the front
moulding reduce diffraction and improve dispersion.
●The crossover components use heavy gauge wire throughout and new drivers guarantee not
only high reliability but ensure that top specifications are met.
B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. E & OE. All trademarks acknowledged.
www.bwspeakers.com
Drive Units
Frequency Response
1 x 26mm high-frequency with
aluminium dome, 26mm coil on
aluminium former, wound with polymide
resin and heat cured
1 x 200mm bass/midrange with
composite short fibre cone, 30mm coil
on Kapton® former, wound with
polymide resin and heat cured
55Hz – 20kHz ± 2.5dB on reference
axis
Sensitivity
Nominal Impedance
Power Handling
Dimensions
Finish
91dB spl(2.83V 1m)
8 ohms
10W – 120W into 8 ohms on
unclipped programme
Height: 634mm Width: 236mm
Depth: 302mm
Black ash or walnut vinyl