Bowflex 7224FBOW User manual

Instruction Manual and Warranty Information
Model # 7224FBOW
IB7224FBOW
32
Smart Scale
with Bluetooth® 4.0 Technology
Body Fat, Body Water, Muscle Mass & Cal-Max™
For service or repair -
do not return this unit
to the retailer. Contact
TAYLOR Consumer
Relations:
Phone:
1-866-843-3905
Business Hours:
7:30 am – 4:30 pm
(MST)
Monday – Friday
e-mail:
prodsupport@
taylorusa.com
Mobile device not included. FREE APP
Distributed By:
Taylor Precision Products, Inc.
2220 Entrada Del Sol, Suite A
Las Cruces, New Mexico 88001
1-866-843-3905
www.taylorusa.com
MADE IN CHINA.
Five (5) Year Limited Warranty
This scale is warranted against defects in materials of workmanship (excluding
batteries) for ve (5) years for the original purchaser from date of retail
purchase. It does not cover damages or wear resulting from accident, misuse,
abuse, commercial use, or unauthorized adjustment and/or repair. Do not
return to retailer. Should this scale require review (or replacement at our
option) while under warranty, please pack the item in the original packaging
and return it prepaid, along with store receipt showing date of purchase and
a note explaining reason for return to:
Taylor Precision Products, Inc.
2220 Entrada Del Sol, Suite A
Las Cruces, New Mexico 88001
1-866-843-3905
email: www[email protected]
There are no express warranties except as listed above. This warranty gives
you specic legal rights, and you may have other rights which vary from state
to state. For additional product information please contact us through www.
taylorusa.com.
If review is required, do not return to retailer. For information call 1 (866) 843-
3905 from 7:30 am to 4:30 pm, Mountain Standard Time, Monday through
Friday. To assist us in serving you, please have the model number and date of
purchase available.
Not Legal for trade.
©2014 Taylor Precision Products, Inc. and its afliated companies, all rights
reserved. Taylor® is a registered trademark and Cal-Max™ and SmarTrack™
are a trademarks of Taylor Precision Products, Inc. and its afliated companies.
All rights reserved.
Bowex® is a registered trademark of Nautilus, Inc. All rights reserved.
6.14 WC

BODY FAT SCALE WITH BODY FAT, BODY WATER, MUSCLE MASS
AND Cal-Max™
INSTRUCTION MANUAL
Model # 7224FBOW
INTRODUCTION
Thank you for purchasing the Boflex® Smart Scale with Bluetooth® 4.0 technology. You
will now be able to effortlessly measure, track and share health and fitness information.
This instruction manual will guide you through the setup process and provide key
information about the scale itself. Please read it completely and keep it handy for
future reference.
WHAT IS INCLUDED
• Smart Scale with Bluetooth® 4.0 technology
• Instruction Manual
• Quick Use Guide
• Three (3) AAA Batteries
3
Table of Contents
INTRODUCTION ........................................................................................………………………………..3
WHAT IS INCLUDED ..................................................................................………………………………..3
INTENDED USE ..........................................................................................………………………………..3
CAUTION .............................................................................................………………....………………..3
PRODUCT DESCRIPTION ..........................................................................………………………………..4
INSTALLING BATTERIES .............................................................................………………………………..5
SETTING UP YOUR SMART SCALE USING BLUETOOTH® 4.0 TECHNOLOGY …………......……………..5
SMART SCALE COMPATIBLE DEVICE REQUIREMENTS .............................………………………………..5
INITIAL PROCEDURES ...............................................................................………………………………..6
- SET UNIT OF MEASUREMENT ................................................................………………….……………..6
- DOWNLOAD SMARTRACK APP AND SET UP USER PROFILE ..............………………………………..6
- SET ACTIVITY LEVEL ...............................................................................………………………………..6
- SET GOAL WEIGHT ................................................................................………………………………..6
EDIT USER PROFILE ...................................................................................………………………………..6
SET UP BLUETOOTH CONNECTION ..........................................................………………………………..7
DELETING A USER PROFILE FROM THE APP .............................................………………………………..7
MEASUREMENT PROCEDURES WITH BLUETOOTH .................................………………………………..8
- TO TAKE A MEASUREMENT ...................................................................………………………………..8
- MEASURING USING AUTO RECOGNITION FEATURE ...........................………………………………..9
- DATA TRANSMISSION FROM SMART SCALE TO MOBILE DEVICE .................…………....…………..9
- VIEWING DATA ON YOUR PERSONAL DEVICE .....................................……………………………..10
- SHARING YOUR DATA .............................................................................……………………………..10
- APP COMPATIBILITY .............................................................................………………………………..10
- MEMORY & STORAGE ..........................................................................………………...……………..10
SETTING UP AND USING YOUR SMART SCALE WITHOUT USING BLUETOOTH ..........……..11
- SET UNIT OF MEASUREMENT .................................................................………………………………..11
- WEIGHT ONLY MEASURMENT WITHOUT USING BLUETOOTH ..............……………………………..11
- SET UP YOUR SMART SCALE ........................................................................……...………………12-13
MEASURMENT PROCEDURES WITHOUT USING BLUETOOTH ....................................………..14
- MEASURING USING AUTO RECOGNITION FEATURE ...........................………………………………..15
EDUCATIONAL INFORMATION ................................................................……............……………16-18
SAFETY, USAGE & CAUTION INFORMATION ....................................………………………………..18-19
QUESTIONS AND ANSWERS ................................................................…………………...……………..20
CARE AND MAINTENANCE ................................................................…………...……………………..21
DETAILED BATTERY INFORMATION ...............................................................…………………………..21
PRODUCT SPECIFICATIONS ……............................................................………………………………..22
PROBLEM SOLVING ……………...........................................................………………………………….23
SPECIAL DISPLAYS ………......…...........................................................………………………………….24
BMI CHART ……..............………...........................................................………………………………….25
IMPORTANT NOTICE TO USERS ................................................................…..………………………….26
FCC INFORMATION …………....…..........…………………................…………………………………….27
ADDTIONAL PRODUCT INFORMATION …………....…..........…………...……………………………28-30
CONTACT INFORMATION…………....…………………….................…………………………………….32
The scale uses the method of Bioelectrical Impedance Analysis (BIA) to
estimate body fat, total body water and muscle mass. It sends a harmless
amount of electricity into the body, then estimates from the measured
impedance of the body, the percentage of body fat, percentage total body
water and percentage muscle mass. It is intended for adult use in the home.
INTENDED USE
• Do not use this device if:
• You are pregnant
• You are acutely or chronically ill, suffering from a disease or taking
medications that affect your water levels. The accuracy of readings for these
patients has not been veried.
• You have a pacemaker or any other internal medical device.
• Any information provided by this device is in no way meant to treat, cure or
prevent any disease or illness from happening.
• Specic medical advice should be obtained from a physician.
• Do not disassemble the scale as incorrect handling may cause injury.
• Do not step on the scale when your body or feet are wet, especially after
bathing or showering to prevent slipping.
CAUTION

5
4
PRODUCT DESCRIPTION
FRONT & BACK VIEW
LCD READOUT & BUTTON DESCRIPTION
FUNCTION KEYS
SET
• Conrmation button for selection
• Recall settings of user memory locations
p or q
• Changes value of height, age and activity level, toggle between Male/Male Athlete and
Female/Female Athlete
• Scroll through user memory P1 - P8
UNIT / CONNECT
• Quick single clicks will change between pound, kilogram and stone units of measurement
• Press and hold to send a transmission to connect via Bluetooth® to your mobile device
SET Button
LCD Readout
Platform with
electrodes
p &q Button
Unit of Measure and
Connect Button
Battery Compartment INSTALLING BATTERIES
This scale operates on 3 AAA alkaline batteries (included). Open the battery
cover on the back of the scale unit. Remove any plastic wrap from the
batteries. Insert the batteries. Be sure the polarity of the batteries is set correctly
for the scale to function properly. Always replace all batteries at the same
time; do not combine old and new batteries. Do not mix Alkaline, carbon zinc
(standard) or Nickel- Cadmium (rechargeable) batteries. If you do not intend
to use this unit for a prolonged period of time, it is advisable to remove the
batteries before storing.
AUTOMATIC SHUT-OFF
To conserve battery life this scale has an automatic shut-off feature. If the scale is
turned on and not touched, it will display “0.0” and turn off after 10 seconds. If the
scale is turned on, a measurement taken and weight is locked, the measurement
readings will be displayed and the scale will shut off after 10 seconds.
Cal-Max™ FEATURE
The Cal-Max feature uses your gender, height, age, current weight and an activity
level setting to estimate number of calories you can consume a day to maintain
your present weight. This estimation may gradually help you with a weight loss, gain
or maintenance plan.
SETTING UP YOUR SMART SCALE
USING BLUETOOTH® 4.0 TECHNOLOGY
You can use your Smart Scale with or without Bluetooth 4.0 transmitting data. Below
are the directions for setting up the scale using Bluetooth 4.0. For instructions on
setting up the scale as a stand-alone scale only, please see page 11.
SMART SCALE REQUIREMENTS
The Smart Scale is designed to be used with the following:
• iOS
iPhone, iPad and iPod touch using iOS 6 and above
• Android
The following products: Samsung Galaxy S3/S4/ Note II,
HTC One and Google Nexus 4
• Compatible with devices running Bluetooth® 4.0 technology
and above

EDIT USER PROFILE
To change a prole, tap the user prole icon ( ) and then make changes to the
data as necessary. Once the changes are made, tap the back button ( ) to
save the changes.
7
6
SET UNIT OF MEASUREMENT
Your scale is set to read weight in pounds (lb). You may select kilograms
(kg) or stone (st lb) (1 stone = 14 pounds) units of measurement by
pressing the “UNIT / CONNECT” button on the bottom of the scale.
Quick single clicks will change the units that display.
This button will also be used to connect to Bluetooth® by pressing and
holding the button. Be sure to check the unit of measurement after you
connect to the Bluetooth® app to be sure you have the preferred unit
displayed.
INITIAL PROCEDURES
DOWNLOAD SmarTrack™ APP & SET UP USER PROFILE
Download the FREE SmarTrack™ application from either the
App Store (for iOS devices) or Google play (for Android devices).
Use keyword search terms “SmarTrack”, “Smart Scale”,
“Smart Bath Scale”, “Weight Scale” or “Bluetooth Scale”.
Once you have downloaded the SmarTrack™ App, it is important that any
Smart Scale users follow the on-screen instructions to register. Once you
have registered on the app, enter your personal prole from your device
(phone or tablet). Completing a personal prole is essential because
the data you enter (gender, height, normal/athlete, age, activity level) is
necessary to provide you with the most accurate information.
SET ACTIVITY LEVEL
Your personal prole will include an activity level. Choose from one of the following
activity levels:
Level-1 Sedentary / very inactive: little or no exercise
Level-2 Limited Activity: exercise/sports 1-3 days a week
Level-3 Moderate Activity: exercise/sports 4-5 days a week
Level-4 Very Active: exercise/sports 6-7 days a week
Level-5 Extremely Active: physically demanding exercise/sports or athletic training
SET GOAL WEIGHT
From your home page, tap the edit user icon ( ) and then tap the
goal weight button. From the goal weight page, turn the feature on
and scroll right or left, or use the – and + keys to set your goal weight.
Set your goal date by tapping on the date and scrolling. Use the ( )
to save and return to your user prole page, hit the ( ) again to go
to the home page.
Once the prole is complete, it will transmit the user information to the
scale during the next transmission.
UNIT / CONNECT
Note: If you are sharing the scale with another user and they enter a personal
prole through the scale directly, be sure you are aware of which user number
they have selected. If you select their user number, your app prole will override
the prole entered on the scale. Ensure all users are aware of which user numbers
have already been selected.
Your SMART SCALE estimates body fat %, total body water%,
muscle mass, daily calorie estimates and weight, and then
it transmits your results to an app on a mobile device using
Bluetooth® 4.0 technology.
1. Turn on the Smart Scale by stepping on it with a bare foot until
“0.0” displays.
2. Ensure your Bluetooth setting is “On” in your mobile device
(Example: Settings > Bluetooth > On) By now you should have
downloaded the SmarTrack™ App, registered and set-up your
user prole.
3. From your home page, select the settings icon ( ), select
add device ( ), select SmarTrack™ Bluetooth Body Analyzer.
Then quickly pick up the scale and turn it over and press and
hold the “UNIT / CONNECT” button (Note: it may take up to 30
seconds for the device to detect the Bluetooth signal.)
4. The Add Device screen will then indicate that the scale has
connected when “SmarTrack™ Bluetooth Body Analyzer found”
is displayed on your screen.
5. Select SmarTrack™ Bluetooth Body Analyzer and it will take you
to the “Pair User” screen where you will select your user number.
The scale can store data for up to 8 users. Tap your user number
and it will take you to the “Completed” screen. Tap “Done”
and it will take you back to your home page.
Note: If you are sharing the scale with another user and they
enter a personal prole through the scale directly, be sure you
are aware of which user number they have selected. If you
select their user number, your app prole will override the prole
entered on the scale. Ensure all users are aware of which user
numbers have already been selected.
6. The Smart Scale is now ready for use.
SET UP BLUETOOTH® CONNECTION
CONNECTION TROUBLESHOOTING
If the transmission fails, repeat above steps. To improve transmission connection,
follow these guidelines:
a) Place the scale and Bluetooth® device reasonably close together, between 3
and 30 feet.
b) Check there are no obstacles between the scale and the Bluetooth® for best
connection.
c) Other electronics devices may cause interference (particularly those with
Bluetooth); keep them at least 3 feet away from the scale.
Note: If the batteries are removed from the scale, you will not have to reconnect the
scale to the app as it will still recognize the device when you replace the batteries.
DELETING A USER PROFILE FROM THE APP
In order to delete your user prole from the app, go into Settings and delete the
scale device. This will disconnect the app and the scale.

9
8
To ensure accuracy, use these tips to get the most
accurate and consistent readings from your scale:
• Place the scale on a at, hard oor surface. Carpeted
or uneven oors may affect accuracy. If you
experience any difculty, move the scale to a different,
hard at surface and try again.
• You must have bare feet for estimation results.
Remove your shoes and socks before proceeding.
Clean, slightly moist feet will provide the best results.
Position your feet for maximum contact with the metal
electrodes on the platform.
• Balance your weight evenly between both feet and
stand still while on the scale.
• Weigh yourself at the same time each day to see
consistent trends. Your weight and other measures will
naturally vary during the course of the day.
• IMPORTANT: The scale needs to be initialized after
battery installation or if it is moved or bumped. At all
other times, you may step directly on the scale for
a reading. To initialize the scale, simply press rmly
on the scale platform. The display will turn on and
automatically turn off. Your scale is now ready for use.
MEASUREMENT PROCEDURES WITH BLUETOOTH®
PRECAUTION !
The scale must be
started up after each
battery insertion/
replacement of
battery or each time it
is moved or bumped.
PRECAUTION !
Do Not step on scale
unevenly (X)
To avoid injury, do not
step with wet feet or on
the edge of the platform.
TO TAKE A MEASUREMENT:
1. If your user information is already in the scale, then
simply step on the scale to turn it on.
OR Press “SET” to turn the scale manually on and to
select the user number that you paired with your
personal device.
2. When the scale shows zero, step on the scale with
bare feet, positioning your feet evenly on the scale
platform with maximum contact with the metal
electrodes.
3. Stand still while the scale measures your weight. The
display counts up to your weight and will ash twice
when the weight is locked. Your weight is displayed.
4. Continue to stand still on the scale. A moving zeros
pattern shows while the scale estimates your body
composition.
5. Your body fat % (FAT), total body water % (TBW),
muscle mass (MUS), Cal-Max™ estimate (CAL),
and the difference between your current and
goal weights are automatically transmitted to your
personal device.
MEASURING USING AUTO RECOGNITION FEATURE
After you have saved your personal prole data into a memory number and
weighed yourself once, the scale will automatically recognize you for future weigh-
ins. It does this based upon the weight of the user (it will detect all proles within +/-
4.4 lbs / 2 kgs):
1. When you step the platform if there is only one user whose last weight data is
close to the current one, the memory number will be selected automatically.
When estimates are completed, the results appear on your personal device.
2. If two or more users are in a similar weight range (within +/- 4.4 lbs / 2 kgs), the
scale will notify you to choose between, for example, P1 and P2. Press “▲” or “▼”
to get to the correct number and select the user by pressing ‘SET’. If the scale
cannot identify the user’s memory number, it will only display the weight. See
“Problem Solving” section.
Note: You need to save your personal data in a user number before using the
automatic user identication measuring method, or the function will fail.
DATA TRANSMISSION FROM SMART SCALE TO MOBILE DEVICE
When your Smart Scale has been paired up with your phone or other mobile device,
your data results will be transmitted to the device via Bluetooth. An onscreen
“ ” icon indicates a successful Bluetooth® connection.
A ” ” icon appears while data is transmitted, then disappears when transmission is
complete. You may review your data on your mobile device.
If the “ ” icon remains on the screen, the transmission has failed. The scale
will temporarily store the pending data, and it will be transmitted after the next
measurement is complete.
Note: Data will only be transmitted if attached to a specic memory number. If a
personal prole has not been assigned to a memory number, the results will appear
once on the scale display only and will not be transmitted or saved.

10 11
When you have stepped on the scale and Smart Scale has synced, you can view
the measured data:
From your home page tap on the dashboard: You can view as a graph and a
dashboard at the same time or turn your device horizontally for a larger graph view.
In either graph view, tap the (weight bar) to drop down the menu of measurement.
Tap the measurement you want to view (such as Body Fat, Body Water etc...).
You can also tap the page icon to see a full listing of individual data as well as to
delete or manually enter a weight.
Tap the ( ) to return icon to your home page.
VIEWING DATA ON YOUR PERSONAL DEVICE
SHARING YOUR DATA
From your home page, tap the share button on the bottom of the
screen. This will take you to default facebook, twitter or email on the
mobile device and follow the prompts afterward.
APP COMPATIBILITY
From your home page, tap the settings ( ) icon, tap connection,
then select the app you wish to connect to by sliding the on/off
switch ( ) to “ON”. Your data will be automatically uploaded
into that app for the measurement that the app supports. If you
decide you no longer want your data to transfer over, simply slide
the switch to off.
MEMORY AND STORAGE
After it has been used for the rst time, the Smart Scale will be synchronized with
your personal device. If you take a measurement on the scale without immediately
uploading to your device, the data will be stored in the scale’s memory and can be
uploaded to your personal device when a connection is re-established. See section
“Data Transmission from Smart Scale to Mobile Device”.
Memory
The SmarTrack app itself can store unlimited results for each user. The number of
records that can be viewed will be based on the memory capacity of the user’s
device. New measurements will overwrite the oldest ones. All of your data will be
saved in a cloud so that if your device is damaged your history will not be lost.
Graph and
Dashboard
view
Graphs
Views
Text
Views
A user may choose to use the Smart Scale as a basic weight only scale, or view
a one-time current body composition estimate on the scale only, without use of
Bluetooth® and a mobile device app.
SET UNIT OF MEASUREMENT
Your scale is set to read weight in pounds (lb). Press the “UNIT” button on the
bottom of the scale to select kilograms (kg) or stone (st lb) (1 stone = 14 pounds)
units of measurement.
SETTING UP YOUR SMART SCALE
WITHOUT
USING BLUETOOTH® 4.0 TECHNOLOGY
WEIGHT ONLY MEASUREMENT WITHOUT USING BLUETOOTH®
Your Smart Scale will operate as a basic weight-reading scale.
The scale needs to be initialized after battery installation or if it is moved or
bumped. At all other times, you may step directly on the scale for a reading. To
initialize the scale, simply press rmly on the scale platform. The display will turn on
and automatically turn off. Your scale is now ready for use.
1. Position the scale on a at, hard surface. Carpeted or uneven oors may affect
accuracy.
2. Step onto the scale platform and remain still. The display counts up to your
weight and will ash twice when the weight is locked. Your weight is now
displayed.
3. The scale will display your weight value.
4. The scale will automatically turn off after 10 seconds.
Note: A weight only reading will not be saved in the scale and will not be
transmitted to the app. The weight will only be saved and transmitted during a
body composition reading while paired up with the app.

12 13
SETTING UP AND USING YOUR SMART SCALE WITHOUT USING BLUETOOTH®
BODY COMPOSITION ESTIMATIONS WITHOUT USING BLUETOOTH®
In order to use the Smart Scale’s body composition estimation feature, you must
enter your age, height, gender, normal/athlete selection and an activity level. This
data will be saved into a personal data prole for easy use each time the scale is
used.
SET UP YOUR USER PROFILE
To set up and save your personal user data prole into memory:
1. Select a Memory Number
Press “SET” while the scale is off. The scale will turn on and “P1” will blink on the screen.
Press “▲” or “▼” to choose a memory number (P1-P8). Press “SET” to conrm the
memory number. The gender icon blinks.
2. Set Gender / Athlete
Press “▲” or “▼” to choose male ( )/ male athlete ( ) /female ( )/ female
athlete ( ). Press “SET” to conrm. The goal weight number blinks.
NOTE: Athlete mode is only available for those 15-85 years of age. For those aged
outside this range, this step is automatically by-passed. (See section: “Why is the
Athlete Mode necessary in a Body Fat Analyzer?”). For this scale, an athlete is dened
as a person who consistently works out for approximately 3 times per week at 2 hours
for each occurrence.
3. Set a Goal Weight
Press “▲” or “▼” to change the goal weight number. Press “SET” to conrm. Height
digits will begin to blink.
4. Set Height
Press “▲” or “▼” to adjust the height. Press “SET” to conrm. Age will begin to blink.
5. Set Age
Press “▲” or “▼” to adjust the age. Press “SET” to conrm. Activity level begins to blink.
6. Choose an Activity Level
Press “▲” or “▼” to increase / decrease the activity level.
Select your Activity Level according to the following guidelines:
Level-1 Sedentary / very inactive: little or no exercise
Level-2 Limited Activity: exercise/sports 1-3 days a week
Level-3 Moderate Activity: exercise/sports 4-5 days a week
Level-4 Very Active: exercise/sports 6-7 days a week
Level-5 Extremely Active: physically demanding exercise/sports or athletic training
Press “SET” to conrm your activity level and all other selections.
7. After pressing “SET”, the scale will display your personal data once, then zero. When
zero shows, you may step on the scale with bare feet for your body composition
estimation. Otherwise, the scale will turn off automatically. Your data is saved.
8. Repeat above steps to set up another user.
To change a prole, repeat above steps and make changes to the data as
necessary.
Notes:
● If you are sharing the scale with another user and they enter a personal prole
through the app and choose the user number you selected, their app prole will
override your prole entered on the scale. Ensure all users are aware of which user
numbers have already been selected.
● Delete a User Prole: Once a user prole is set up directly into the scale it cannot
be deleted. However, if a prole is set up through the app and that user number is
selected, it will override the user information in the scale.
● If the batteries are changed, the user information that has been entered through
the scale will not be lost.

14 15
MEASUREMENT PROCEDURES WITHOUT BLUETOOTH®
Use these tips to get the most accurate and consistent readings from
your scale:
• Place the scale on a at, hard oor surface. Carpeted or uneven
oors may affect accuracy. If you experience any difculty, move
the scale to a different, hard at surface and try again.
• You must have bare feet for estimation results. Remove your shoes
and socks before proceeding. Clean, slightly moist feet will provide
the best results. Position your feet for maximum contact with the
metal electrodes on the platform.
• Balance your weight evenly between both feet and stand still while
on the scale.
• Weigh yourself at the same time each day to see consistent trends.
Your weight and other measures will naturally vary during the
course of the day.
• IMPORTANT: The scale needs to be initialized after battery installation
or if it is moved or bumped. At all other times, you may step directly
on the scale for a reading. To initialize the scale, simply press rmly
on the scale platform. The display will turn on and automatically
turn off. Your scale is now ready for use.
Measuring by Selecting a User Number Manually
1. Press “SET” to turn the scale on.
2. Press “▲” or “▼” to move to your memory number (P1-P8).
3. The memory number will blink 3 times then remain steady. The display will show
your data and then zero.
(Note: if you press “SET” while the memory number is blinking, the scale will enter
Setting Mode instead of Measurement Mode. If this occurs, press “SET” to re-conrm
all the data. The scale will show the data again and then zero. When the ( ) icon
appears on the LCD the data is not sent to a mobile device.
4. When the scale shows zero, step on the
scale with bare feet, positioning your feet
evenly on the scale platform with maximum
contact with the metal electrodes.
5. Stand still while the scale measures your weight. Your weight will appear on the
screen. Continue to stand still on the scale. A moving zeros pattern shows while
the scale estimates your body composition.
6. Your body fat % (FAT), total body water % (TBW), muscle mass (MUS), calorie
estimate (CAL), and the difference between your current and goal weights are
displayed sequentially 3 times.
(A “ ” arrow by the goal weight number indicates you are over your goal
weight. A “ ” arrow indicates you are under your goal weight.)
7. The scale will turn off automatically.
Notes:
A) If the scale is paired with your mobile device and the Bluetooth® is ON, the scale
will send the measurement results to the mobile device instead of the scale, and
the scale display will be blank.
B) If the scale cannot identify the user’s memory number, it will only display the
weight. See “Problem Solving” section.
BODY FAT BODY WATER
MUSCLE MASS CALORIE ESTIMATE GOAL WEIGHT
MEASURING USING AUTO RECOGNITION FEATURE
After you have saved your personal prole data into a memory number and
weighed yourself once, the scale will automatically recognize you for future weigh-
ins. It does this based upon the weight of the user (it will detect all proles within +/-
4.4 lbs / 2 kgs).
1. When you step the platform, if there is only one user whose last weight data is
close to the current one, the memory number will be selected automatically.
When estimates are completed, the results appear on the scale.
2. If two or more users are in a similar weight range (within +/- 4.4 lbs
/ 2 kgs), the scale will notify you to choose between, for example,
P1 and P2. Press “▲” or “▼” to get to the correct number and
select the user by pressing ‘SET’. If the scale cannot identify the
user’s memory number, it will only display the weight. See “Problem
Solving” section.
Note: You need to save your personal data in a user number before using the
automatic user identication measuring method, or the function will not work.
PRECAUTION !
The scale must
be started up
after each
battery insertion/
replacement of
battery or each
time it is moved or
bumped.
PRECAUTION !
Do Not step on scale
unevenly (X)
To avoid injury, do not
step with wet feet or on
the edge of the platform.

17
16
1. Why is it important to monitor percentage body fat (%BF)?
The absolute weight traditionally determines whether or not a person is obese.
Weight change in itself does not indicate whether it was the weight of body fat
or muscle that had changed. In weight management, it is desirable that muscle
mass be maintained while body fat is lost. Thus, monitoring the percentage of
fat in the body is an important step toward successful weight management and
body health.
The optimal %BF of an individual varies according to age and gender.
The table as follows may be used as a guide:
IMPORTANT INFORMATION TO KNOW BEFORE USING YOUR BODY FAT SCALE
Before using the scale, you should know ...
EDUCATIONAL INFORMATION
2. How is percentage body fat (%BF) estimated?
The percentage of BF is measured by a method called Bioelectrical Impedance
Analysis (BIA). The use of BIA to estimate body fat has been pioneered since the
seventies. It was only in the past decade that the estimation of body fat using BIA
technology was successfully offered to the consumer as a compact bathroom
scale. With BIA technology, a low intensity electrical signal is sent through the
body. The signal is very low and causes no bodily harm. Depending on the
amount of body fat of the individual, the electrical signal will ow with a different
degree of difculty. The difculty with which a signal ows through the body is
called electrical impedance. Hence, by measuring the electrical impedance
and applying to the data a proprietary algorithm, %BF can be estimated. Please
note that the percentage of body fat and body water will not add up to 100%.
Please be reminded that the %BF estimated with the scale represents only a good
approximation of your actual body fat. There exist clinical methods of estimating
body fat that can be ordered by your physician.
The optimal %TBW and average %SM of an individual varies according to
age and gender. The table as follows may be used as a guide:
3. Why is it important to monitor percentage Total Body Water (%TBW) in the body?
Water is an essential component of the body and its level is one of the health
indicators. Water makes up approximately between 50-70% of the body's weight.
It is present proportionally more in lean tissue compared to fat tissue. Water is a
medium for biochemical reactions that regulate body functions. Waste products
are carried in water from cells for excretion in urine and sweat. Water provides
form to cells; helps to maintain body temperature; provides moisture to skin and
mucosa; cushions vital organs; lubricates joints and is a component of many
body uids. The amount of water in the body uctuates with the hydration level
of the body and state of health. Monitoring the level of body water can be a
useful tool for one's health maintenance. Similar to body fat estimation, the %TBW
function provided in this scale is based on BIA.
The estimated %TBW may vary according to your hydration level, that is, how
much water you have drunk or how much you have sweated immediately prior
to the estimation. For better accuracy, avoid uctuation in hydration level prior
to the estimation. The accuracy of the scale in estimating TBW will also decrease
with individuals suffering from diseases that tend to accumulate water in the
body.
Please be reminded that the %TBW estimated with the scale represents only a
good approximation of your TBW. There exist clinical methods of estimating total
body water that can be ordered by your physician.

19
18
6. Muscle Mass- Why should I know it?
According to the American College of Sports Medicine (ACSM), lean muscle
mass may decrease by nearly 50 percent between the age of 20 and 90. If
you do nothing about this, you are losing muscle and increasing fat. It is also
important to know your muscle mass % during weight reduction. At rest, the
body burns approximately 110 additional calories for each kilo of muscle
gained. Benets of gaining muscle mass include:
• Reversing the decline in strength, bone density and muscle mass that
happens with aging
• Maintenance of exible joints
• Guide weight reduction when combined with a healthy diet.
4. When should I use the scale’s body fat and total body water functions?
For maximum accuracy and repeatability, it is recommended that the scale’s
body fat and total body water functions be used at approximately the same
time of the day, e.g. before breakfast in the morning. It is also a good practice
to avoid swings in hydration level of the body prior to the estimation. Establishing
your own baseline value of %BF and %TBW and tracking their changes is better
than merely comparing your %BF and %TBW value to the population’s “normal”
value.
The estimates provided are not substitutes for physician assessments. Consult
your physician to determine what body fat percentage, total body water
percentage, body mass index and daily calorie intake are most ideal for you.
5. What is the Cal-Max™?
The Cal-Max function estimates the number of calories required based on
your body composition and user entered personal data. This tool can be used
as a guide when setting daily calorie goals during weight loss and exercise
programs.
CAUTION:
• BIA (Bioelectrical Impedance Analysis) method estimates your body fat
percentage by sending a harmless signal through the body.
• This device should not be used by anyone with an internal electronic medical
device, such as a pacemaker, as a precaution against disruption to that device.
• If in doubt, contact your physician.
• This scale will give body fat estimates for a majority of people, but is not intended
for use by the following groups:
Children: Anyone under the age of 18 years
Pregnant Women
• Interference may occur in the vicinity of equipment marked with the following
symbol “ ”. Also, the scale may interfere with electrical equipment within its
vicinity.
• To enable the data transmission function, this scale should be paired to a
Bluetooth® end at 2.4 GHz.
How to mitigate possible interference?
1. The distance between the scale and the Bluetooth should be reasonably
close, between 3 to 30 feet. Please ensure there are no obstacles between
the scale and the Bluetooth end so as to obtain a quality connection.
2. To avoid interference, other electronics devices (particularly those with
Bluetooth® transmission/transmitter should be kept at least 3 feet away from
the scale.
Symbol for “MANUFACTURER”
Symbol for “ENVIRONMENT
PROTECTION – Waste electrical
products should not be disposed of with
household waste. Please recycle where
facilities exist. Check with your local
authority or retailer for recycling advice”
Symbol for “TYPE BF APPLIED
PARTS”
The Bluetooth Combination Mark
Symbol for “SERIAL NUMBER”
Symbol for “DIRECT CURRENT”
Symbol for “COMPLIES WITH FCC
RULES”
Safety and Usage Information
Symbol for "CAUTION"

2120
QUESTIONS AND ANSWERS:
How exactly is my body fat being measured?
This Body Fat Scale uses a measurement method known as Bioelectrical
Impedance Analysis (BIA). A small current is sent through your body, via
your feet and legs. This current ows easily through the lean muscular tissue
which has a high uid content, but not easily through fat which has a lower
uid content. In this way, the bio-impedance (i.e. resistance to the current) is
used to estimate body fat and body water. The electrical current is small and
may not be felt. Contact with the body is made via metal electrodes on the
platform of the scale.
What is the value of the current passing through me when the measurement
is taken? Is it safe?
This BIA technology is safe, non-invasive, toxic-free and harmless. The current
is measured at less than 1mA. However, please be aware that anyone with a
wearable or implantable medical device, such as a pacemaker, must avoid
using this device. Do not use on pregnant women. The result is inaccurate and
effects on the fetus are unknown.
Why is the Athlete Mode necessary in a Body Fat Scale?
It has been found that body fat estimation using BIA could overestimate the
percentage body fat of adult elite athletes. The physiological variation of
athletes in bone density and level of hydration are two of the reasons said to
account for the difference.
What is the denition of an Athlete?
The general consensus among researchers is that a quantitative dimension
could be used to dene an athlete. An athlete is dened for this scale as a
person who consistently works out for approximately 3 times per week at 2
hours for each occurrence. These individuals should select Athlete Mode for the
most accurate measurement results.
Please note scales are not calibrated for professional athletes or body builders.
WARNING: Batteries may pose a choking hazard. As with all small items,
do not let children handle batteries. If swallowed, seek medical attention
immediately.
NOTE: Please recycle or dispose of batteries per local regulations.
PRECAUTION: Do not dispose of batteries in re. Batteries may explode or leak.
Remove the batteries if the scale will not be used for a long period of time.
WARNING!
1. Do not disassemble the scale other than for replacing the batteries; it contains
no user serviceable parts. Damage to the scale may occur as a result of
improper handling.
2. Remove the batteries when the scale is not used for a prolonged period of
time.
3. Clean the scale after use with a dampened cloth. Do not use solvents or
immerse the unit in water.
4. Avoid excessive impact or vibration to the scale, such as dropping it onto the
oor.
5. When replacing batteries, always replace all batteries at the same time; do
not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or
rechargeable (ni-cad, ni-mh, etc)batteries.
6. Do not store anything on the scale, as it is a sensitive weighing device.
7. Do not store the scale where you store cleaning chemicals. The vapors from
some household products may affect the electronic components of your
scale.
CARE AND MAINTENANCE
BATTERY REPLACEMENT
1. Use 3 “AAA” batteries only. Remove any plastic wrap from the batteries before
proceeding.
2. Remove the Battery Compartment Cover on the bottom of the scale.
3. Place the batteries into the battery compartment as indicated by the polarity
symbols marked in the compartment.
4. Replace the Battery Compartment Cover.
5. The scale needs to be initialized before rst use or after battery replacement.
Press rmly on the scale platform. The display will turn on and automatically turn
off. Your scale is now ready for use.
BATTERY INFORMATION
Low batteries
This scale is equipped with a low battery indicator. Replace the batteries when
“ Lo ” is displayed, if readings grow dim or become irregular, or if the scale shuts
off quickly.

2322
PRODUCT SPECIFICATIONS
1. Bioelectrical Impedance Analysis (BIA) technology for body fat and total body
water percentage, calorie intake estimations and muscle mass percentage
estimations
2. High precision STRAIN GAUGE technology for weight measurement
3. Athlete (for ages 15-85 years) or Normal Mode selection
4. 8 - user memories
5. 3 - button operation
6. Auto-on and auto-off functions
7. Power saving LCD readout
8. Low battery indicator
9. Capacity: 400 lb, 180 kg, 28 st :5 lb
10. Graduation: 0.2lb or 0.1kg
11. Body fat graduation: 0.1%
12. Body water graduation: 0.1%
13. Muscle mass graduation: 0.1%
14. Age range from 10 to 85 years
15. Height range from 3'3.5" to 7'2.5" (100 to 220 cm)
16. Body fat range: 5% to 60%
17. Total body water range: 43% to 73%
18. Operates with 3 AAA batteries (included)
19. Product dimension: 11.8”×11.8”×0.9” (300×300×23.9mm Approx.)
20. Gift box dimension: 14.7”×14.3”×1.7”(374×364×43mm Approx.)
21. Product weight: 3.5 lb(1.59 kg Approx.)
22. Total weight (product &gift box): 5.27 lb (2.39kg Approx.)
23. Accuracy of weight measurement: 5 ~ 50kg ~ ±0.3kg ~ 50 ~100kg ~ ±0.4kg ,
100 ~ 150kg ~ ±0.5kg ~ 150 ~ 180kg ~ ±0.7kg
24. Output power for Body Fat Analyzer: <300uA
25. Working Environment: Temp: 0ºC to 40ºC / Humidity: ≤90%RH / Pressure: 86-106 kPa
26. Storage Environment: Temperature: -20ºC to 60ºC Humidity: 10%RH to 93%RH
PROBLEM SOLVING
1. You must have bare feet to take this measurement. In order to get the most
accurate and consistent reading, wipe your feet with a damp cloth, leaving
them slightly damp before stepping on the scale. Repeat measurement again,
maintaining maximum contact between your feet and the metal electrodes.
2. The condition of the skin on the bottom of your feet can affect the reading. The
natural effects of aging or activity can make this skin hard. If you are having a
problem operating this scale, please contact customer service.
3. Move your scale to a location where it will not be bumped. If your scale is
bumped while being activated or while in use, an inaccurate reading will
occur. Initialize the scale by pressing rmly on the scale platform to turn on the
scale. The display shows zero and then turns off. The scale is ready for use.
4. Place scale on at, hard surface. Carpeted or uneven oors may affect
accuracy.
5. Make sure the batteries are properly installed. If the LCD is blank, shows “Lo” or
turns off quickly, replace all the batteries.
6. If the scale does not show body fat, total body water, muscle mass and calorie
estimates:
a) You must have bare feet for estimation results. Remove your shoes and socks
before proceeding. Clean, slightly moist feet will provide the best results.
Position your feet for maximum contact with the metal electrodes on the
platform.
b) The scale cannot identify the possible user memory number with the most
similar weight reading. Please assign your personal prole data into a
memory number, following the instructions in the section “SET UP YOUR
PERSONAL PROFILE”.
c) The user did not choose one of the memory numbers displayed (P1, P2, etc.).
Please assign your personal prole data into a memory number, following the
instructions in the section “SET UP YOUR PERSONAL PROFILE”, then choose the
correct number when it appears on screen.
7. Problem Solving if data transmission fails:
a) Bluetooth® is OFF. Turn ON your devices Bluetooth® function.
b) The app is CLOSED. Press the SmarTrack™ icon to turn OPEN your app.
c) Out of range of Bluetooth® transmission (3 to 30 feet). Place your phone or
other mobile device closer to the scale.
d) No data assigned to a memory number. Please assign your personal prole
data into a memory number, following the instructions in the section “SET UP
YOUR PERSONAL PROFILE”.

NOTE: SPECIAL DISPLAYS
Overload Warning. The maximum weighing
capacity of the scale has been exceeded. The
scale will automatically turn off after 4 seconds.
Remove the weight immediately; otherwise,
permanent damage to the scale may occur.
Low Battery. Replace all the batteries. Do not mix
old and new batteries. Do not mix Alkaline,
carbon-zinc (standard) or Nickel-Cadmium
(rechargeable) batteries.
Measuring error. Step off the scale. Tap rmly on
the platform to re-initialize the scale. The display
will turn on and off. Step back onto the scale,
standing still while your results compute. Do
not wear shoes or socks during measurement.
Cleaning bottom of bare feet with a damp cloth
and leaving them slightly damp may help to
improve the contact. Repeat measurement.
Synch error between scale and mobile device.
Check that Bluetooth is ON, the App is ON,
and the scale and mobile device are within
transmission range (3 to 30 feet).
Body Mass Index Chart
Reaching Target Weight
Maintaining proper weight is essential to healthy living. Obesity has been linked to
a higher risk of heart disease, diabetes and some forms of cancer. The Body Mass
Index (BMI) is the most widely accepted measurement of weight according to
health professionals. Use the chart below to determine your own BMI by matching
your height in the left hand column with your weight in the center. Anyone, male or
female, with a BMI of 25 to 29 is considered over weight and a body mass index of
30 is considered obese. Remember to eat right and exercise.
2524

This Boex Smart Scale body fat scale is designed and manufactured in a facility certied ISO
9001 Quality Health and Safety Management Systems and ISO13485 Medical Devices Quality
Management System. The scale uses the method of Bioelectrical Impedance Analysis (BIA)
to estimate body fat and total body water. It sends a harmless amount of electricity into the
body, then estimates from the measured impedance of the body, the percentage of total
body water and percentage body fat. The body fat scale also estimates a daily calorie
intake. The body fat scale is also equipped with an “Athlete Mode” for athletes whose body
build is different from non-athletes. It is intended for adults in the home.
Any information provided by this device is in no way meant to treat, cure or prevent any
disease or illness from happening. This device should not be used by anyone who is acutely
or chronically ill, suffering from a disease or taking medications that affect your water levels.
The accuracy of readings for these patients has not been veried. Specic medical advice
should be obtained from a physician.
This 7224FBOW scale is equipped with a data transmission function. It may emit
electromagnetic energy so as to perform its intended function. Nearby portable and mobile
RF communications equipment can affect the performance of the 7224FBOW scale.
Portable and mobile RF communications equipment can affect the measuring accuracy of
this 7224FBOW scale.
Warning that the use of accessories, transducers and cables other than those specied with
the exception of transducers and cables sold by the manufacturer of the 7224FBOW scale as
replacement parts for internal components, may result in increased EMISSIONS or decreased
IMMUNITY of the 7224FBOW.
Warning: The 7224FBOW should not be used adjacent to or stacked with other equipment.
Note: Read this Instruction Manual carefully and keep it handy for future reference.
• This product is intended for adults and children (ages 18 to 85).
• Make sure to use only the type of battery stated (see Section “PREPARATION
BEFORE USE”).
• The “Athlete” mode is applicable only to people 15 - 85 years of age.
• Body fat percentage estimates will vary with the amount of water in the
body, and can be affected by dehydration or over-hydration due to such
factors as alcohol consumption, menstruation, illness, intense exercise, etc.
• Do not use on pregnant women. The result is inaccurate and effects on the
fetus are unknown.
• For body fat and body water estimates, always estimate in bare feet.
IMPORTANT NOTICE TO USERS
26 27
FCC REGULATIONS
CAUTION:
Changes or modications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules . These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio TV technician for help.
Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Safety Information
Reducing RF Exposure - Use Properly
Only operate the device in accordance with the instructions supplied.
This device complies with FCC radiation exposure limits set forth for an uncontrolled
environment. In order to avoid the possibility of exceeding the FCC radio
frequency exposure limits, human proximity to the antenna shall not be less than
20 cm (8 inches) during normal operation.
FCC ID:
OU9AW2540-LS

28 29

30 31