BOXLIGHT Mimio ProColor Pen Tray User manual

ProColor Pen Tray
User Guide
mimio.boxlight.com

Pen –Tray Specification
Operating Voltage 5V 100mA
Material Aluminum & Plastic
Communication USB HID
AUX USB 1 Port
Sound Buzzer
Function Switch 10 Functions(AHA-840) , 3 Functions(AHA-800)
Key Membrane
Dimensions (WHD) 750 X 45 X 135 mm
Pen-Tray Specification

I. Pen-Tray Configuration and Components.
Pen-Tray
Operation Buttons
USB Cables ( Mini Type ) x 2
Mounting Bracket x 2
Screw M 4*12 x 14
Pen x 2

II. Edupen Pro Operation Buttons ( Option )
① ② ③ ④ ⑤ ⑥ ⑦
①Edupen Pro Black Pen selection button.
②Edupen Pro White Pen selection button.
③Edupen Pro Red Pen selection button.
④Edupen Pro Blue Pen selection button.
⑤Edupen Pro Eraser selection button.
⑥Edupen Pro Create New Page button.
⑦Pen Mode to Windows Mode selection button.
※ To use the Operation buttons shown above, Edupen Pro must be running.
III. Keyboard , Mouse Operation Buttons
① ② ③ ④
①Mouse right click button.
②On screen keyboard call-up button.
③Internet Explorer.
※
①USB port for connection of various USB devices and storage.

1. Install the mounting brackets to the bottom of the
pen tray using the 8 screws provided. Ensure they align
with the mounting marks.
2. Align the pen tray in front of the display with the
brackets over the rear mounting holes. Install the 6
rear holding screws to fasten the bracket to the display.
3. After confirming the tray is centered correctly, hand-tighten all screws.
4. Connect the pen tray’s 2 USB cables to the computer used to operate the display. One
cable must be connected for the pen tray hotkeys and another for the pen tray’s USB data
hub.
IV. Pen-Tray Mounting

V. Connection
USB Mini
PC
USB A Type