BOXLIGHT ProColor 70 User manual

151 NE State Route 300, Suite A,
PO Box 2609, Belfair, Washington, 98528 Phone: [phone] www.boxlight.com
The
Boxlight
Ultimate
Untethered
Classroom
Setup Guide for the
ProColor 70” IFP mounted to the
Rainier Mobile Cart
151 NE State Route 300, Suite A,
PO Box 2609, Belfair, Washington, 98528
BOXLIGHT phone: [phone]
www.boxlight.com
text ‘setup’ to 51555

What’s included
NOTE: There are 4
boxes for setup of
ProColor panel on
Rainier Mount. Contents
vary. Please refer to box
number when going
through setup guide.
Box #1
NOTE: Box #1
contains a smaller
box that houses
the controller &
velcro strips.
Please set aside
for later use.
NOTE: Unlisted
parts are not needed
for setup.
M8 x 75 6mm
Allen Head Screw
x4
M6 x 75 4mm
Allen Head Screw
x2
M8 x 40 6mm
Allen Head Screw
x8
M8 x 40 5mm
Fringed
Allen Head Screw
x 4
M8 Nut
x4
8mm
Washer
x12
Vesa Brackets x2
Frame x1 Mounting Bracket x1
Rainier Controller x1
w/ Velcro Strips
IMPORTANT:
If you did not receive
this bolt, you have
“Package A” and may
proceed with next steps.
If you did receive this
bolt, you have “Package
B” and will need to use
the M8 x 40 Allen Head
Screws (x4) that are
provided in box #4
(Step 5)
151 NE State Route 300, Suite A,
PO Box 2609, Belfair, Washington, 98528
phone: [phone]
www.boxlight.com
text ‘setup’ to 51555
BOXLIGHT
Box 1 Contents:

Box #2
Trolley x 1
Power Strip
x1
Bag of Zip Ties
x1
Mount Column x1Rainier Power Cord x1
w/ Power Extension Cord x1
This is a top view looking down.
Longer portion of legs face forward
Shorter portion of legs
face backward
M8 x 40
6mm
Allen Head Screw
X4
Box 2 Contents:
Box 3 Contents:
Box 4 Contents:
*Reminder –if you
have package B, use
these bolts for Step 5
151 NE State Route 300, Suite A,
PO Box 2609, Belfair, Washington, 98528
BOXLIGHT phone: [phone]
www.boxlight.com
text ‘setup’ to 51555
Front
Back

Step-by-step setup
12
3
4Assemble the Frame
Attach the Mounting Bracket to the Frame using x4 M8 x 75 Allen Head Screws, x4 M8 Nuts, and x4
8mm washers.
Attach Mount Column to Trolley
Open Box #3 and place Trolley upside
down on top of the Mount Column.
Use x4 M8 x 40 Allen Head Screws
(Package A) or x4 M8 x 40 Fringed Allen
Head Screws (Package B), x4 M8 nuts,
and x4 8mm washers to attach the
Trolley to the Mount Column.
Open Box #1 and remove bag of
nuts, bolts, and washers.
Open Box #4 and remove the
x4 M8 x 40 Allen Head Screws
(Package B Only).
Open Box #2 and place
Mount Column upside down on a
flat surface.
Allen Wrenches:
4mm, 5mm, 6mm Phillips Head Screwdriver Socket Wrench/Wrench: 13mm
What you will need to begin:
151 NE State Route 300, Suite A,
PO Box 2609, Belfair, Washington, 98528
BOXLIGHT phone: [phone]
www.boxlight.com
text ‘setup’ to 51555

5
6
7
NOTE: The outside
of the Vesa Bracket
will enter the 9th
slit from the outside
of the frame.
Place Panel on Mount
Afer locking the front wheels on
the trolley, carefully lift the Panel
and align the Vesa Brackets with
the slits on the top of the Rainier
frame and set the panel on the
frame.
Attach Vesa Brackets to Panel
Remove your ProColor 700H V2
from its packaging and attach the
Vesa Brackets to the back of the
Panel using the 6 screws on the back
of the ProColor 700H Panel.
Attach the Frame to the Mounting Column
Place the trolley wheels on the ground. Attach the completed Frame to the top of the
mountng column. Use x2 M8 x 40 Allen Head Screws and x2 8mm Washers on the back, and x2
M8 x 40 Allen Head Screws on the front. *For Package B, please use M8 x 40 Allen Head Screws
provided in Box #4.
NOTE: 4 people
needed to complete
this step.
151 NE State Route 300, Suite A,
PO Box 2609, Belfair, Washington, 98528
BOXLIGHT phone: [phone]
www.boxlight.com
text ‘setup’ to 51555

8
9
10 Attach Power Strip
Remove the zip ties and Power Strip from Box #4.
Attach the Power Strip to the mount, plug it into a wall socket, and proceed to
plug the Rainier Mount into the Power Strip.
Attach Rainier Controller
Locate the Rainier Controller and use the Velcro strips
to fasten the remote to the side of the Panel.
Proceed to plug the controller into the controller port.
Fasten Panel to Mount
Attach x2 M6 x 75 Allen Head Screws and x2
8mm Washers to the back of the frame to lock
the Vesa Brackets onto the Frame.
151 NE State Route 300, Suite A,
PO Box 2609, Belfair, Washington, 98528
BOXLIGHT phone: [phone]
www.boxlight.com
text ‘setup’ to 51555