Residential Utility
Energy Saver Electric Water Heater
The Utility Electric Models Feature:
■DOE—All residential storage models above 20 gallon capacity meet or
exceed efficiency requirements of the Department of Energy. ASHRAE
Standard 90.1 b (current standard) and the National Appliance Energy
Conservation Act of 1987 recent amendment effective January 20, 2004
which supercedes all state and local efficiency requirements.
■Fully Automatic Controls—Fast acting surface-mount thermostat for
automatic temperaturecontrol. Factory installed sensitive manual reset
energy cut-off for safety to prevent overheating.
■Direct Heat Transfer With a Single Immersed Element—Transfers heat
directly and efficiently to the water. Screw-in style element.
■Vitraglas®Lining—Bradford White water heater tanks are protected from
the corrosive effects of hot water by an exclusive ceramic porcelain-like
coating. The Bradford White high silica Vitraglas®lining provides a tough
interior surface for our hot water tanks.
■1" Non-CFC Foam Insulation—Surrounds the tank surface, saving energy
by retarding loss of heat.
■Water Connections—3/4" NPT factory installed true dielectric fittings
extend water heater life and eases installation. Located on the side for
easier installation.
■Alternate Top Water Connections—The 6 and 12 gallon models have
alternate 3/4" water connection tappings on top.
■Protective Magnesium Anode Rod—Provides added protection against
corrosion for long trouble-free service.
■Steel Tank—Heavy gauge steel automatically formed, rolled and welded.
■Voltages Available—120V,208V,240V,277V,480V.
■Single Phase Operation Only.
■T&P Relief Valve Included—All models have special tapping on side
of tank.
Photo is of
M-1-12UT6SS
6 or 10-Year Limited Tank Warranties / 6-Year Limited Warranty on Component Parts.
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties.
See complete copy of the warranty included with the heater.
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,954,492; 5,761,379; 5,943,984; 5,081,696; 5,988,117; 6,142,216; 5,199,385; 5,574,822; 5,372,185; 5,485,879; 5,277,171;
(B1)5,341,770; 5,660,165; 5,596,952; 5,682,666; 4,904,428; 5,023,031; 5,000,893; 4,669,448; 4,829,983; 4,808,356; 5,115,767; 5,092,519; 5,052,346; 4,416,222; 4,628,184; 4,861,968; 4,672,919; Re. 34,534;
7,270,087 B2. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 1,272,914; 1,280,043; 1,289,832; 2,045,862; 2,112,515; 2,108,186; 2,107,012; 2,092,105; 2,409,271.
Vitraglas®is a registered trademark of Bradford White®Corporation. ©2006, Bradford White Corporation. All rights reserved. Printed in U.S.A.
205-B-1207-A
Bradford White received the highest numerical score among water heater/boiler manufacturers in the proprietary J.D. Power and Associates/ McGraw-Hill Construction 2006 HVAC and Water Heater/Boiler Subcontractor Satisfaction StudySM.
Study based on 882 responses measuring 3 water heater/boiler manufacturers and measures opinions of subcontractors. Proprietarystudy results are based on experiences and perceptions of subcontractors surveyed in May through July 2006. Your
experiences may vary. Visit jdpower.com
"Highest in Subcontractor Satisfaction among Water Heater/Boiler Manufacturers"
Copper Screw Type Immersion Element
(Incoloy type immersion element available upon request)
