Branch Quad Desk User manual

Quad Desk
Assembly Guide

The new way of working
you’ve been waiting for.
Scan here for a digital copy
of your assembly guide.

Caution
!

Components
Table Frame Screws
x20
Table Top Screws
x24
Desk Tops
x4
Side Rails
x4
End Rails
x4
Desk Power Doors
x4
Center Leg
x1
Desk Legs
x4

Carefully lay the frame members upside-down on a large flat surface. Remove the doors
from the Center Leg to ease assembly. Connect and screw together the Side Rails (x4) to the
Center Leg (x1) using 8 Frame Screws (x2 screws per joint). Next, connect and screw together
the End Rails (x2) to the Side Rails using 8 Frame Screws (x2 screws per joint).
12
1

Attach the Legs (x4) to the End Rails (x2) using 8 Frame Screws (x2 screws per Leg).
With a helper, carefully flip the frame right-side up.
2
12

Install the Desk Power Doors (x4) into the Desktop Cutouts and then align the Desktops (x4)
to the Desk Frame. From underneath the table, secure the Desktops to the Desk Frame using
the Desktop Screws (x24). It helps to have a helper holding the desktops from above to
prevent movement.
3
12

Optional:
Attach the Power Boxes to the bottom of the Desktops using the included Screws (x16).
Connect the power cord to building power.
In-Desk Power
Optional Elements

Contact
Have a question, comment, or suggestion?
[e-mail]
branchfurniture.com