Branch Six Person Desk User manual

Six Person Desk
Assembly Guide

The new way of working
you’ve been waiting for.
Scan here for a digital copy
of your assembly guide.

Caution
!

Components
Desk Top
x6
Side
Rail
x4
Middle
Rail
x4
End
Rail
x4
Desk Power Door
x6
Middle
Leg
x2
Desk Leg
x4
Frame Screws
x36
Desk Top Screws
x2

Lay the Middle Legs (x2) and Middle Rails (x2) upside down on a large clean surface. Note:
the Middle Rails are longer than the Side Rails. Remove the doors from the Middle Legs to
ease assembly. Join and screw together the Middle Rails (x2) to the Middle Legs (x2) using
the Frame Screws (x8). Using two people, carefully flip the assembled frame right-side up.
Lay the Side Rails (x4), End Rails (x2), and Legs (x4) in position. Starting at one side of the
frame, insert the Legs (x2) and Side Rails into the End Rail (x1) and screw tight with the
Frame Screws (x6). Repeat on the other side of the frame.
12
1

Align and center two Desk Tops (x2) in the middle of the assembled frame. From below,
attach the desktops to the frame with the Desktop Screws (x12).
3
12

Align and place the remaining Desk Tops on both sides of the assembled frame.
From below, atach the desktops to the frame with the Desktop Screws (x24).
4
12

Optional Elements
Optional:
Attach the Power Boxes to the bottom of the Desktops using the included Screws (x16).
Connect the power cord to building power.
In-Desk Power

Contact
Have a question, comment, or suggestion?
[e-mail]
branchfurniture.com

Starting at one side of the frame, carefully flip the first leg assembly right-side up and
connect the frame. Repeat on the other side of the frame. Install the remaining Side Rails
(x2) and screw all joints together with the Frame Screws (x2 per joint).
2
12