Branch Conference Table 6-8 User manual

Conference Table
(6-8)
Assembly Guide

The new way of working
you’ve been waiting for.
Scan here for a digital copy
of your assembly guide.

Caution
!
Make sure to read the guide completely before assembling.
Check that all components are present before you start the assembly process.
Use extra caution when assembling this product and have someone assist you. Do
not change the specifications, modify this product, or use for any other purpose
beyond its intended use as a table.
Do not sit or stand on the table frame. Do not crawl or lie under the table frame.
Do not open or modify any of the power components. Doing so risks electric shock
and voids any warranty claims.
•
•
•
•
•

Components
Table Top
x1
Frame Screws
x20
Table Top Screws
x8
Frame Side
x2
Grommet
x1
Frame End
x2
Table Legs
x4

Carefully lay the Frame Side and End components upside-down on a large flat surface,
making sure the attachment eyelets are facing down as shown. Connect the Frame Ends
(x2) to the Frame Sides (x2) and tightly secure with the Frame Screws (x8). Insert the Legs
(x4) into the Frame Ends and tightly secure with the Frame Screws (x8).
12
1

With a friend, carefully flip the assembled frame right-side up. Position the Table Top (x1) on
the frame, aligning the Frame eyelets with the Table Top pilot holes. Install the Grommet (x1)
into the Table Top. From underneath the table, tightly secure the Table Top to the Frame
using the Frame Screws (x10). It helps to have a friend holding the Table Top from above to
prevent movement.
2
12

Optional:
Tightly secure the Power Box to the bottom of the table top using the included Screws (x4).
Connect the power cord to the nearest outlet.
Table Power
Optional Elements

Contact
Have a question, comment, or suggestion?
[e-mail]
branchfurniture.com