Branch Meeting Table User manual

Meeting Table
Assembly Guide

The new way of working
you’ve been waiting for.
Scan here for a digital copy
of your assembly guide.

Caution
!
Make sure to read the guide completely before assembling.
Check that all components are present before you start the assembly process.
Use extra caution when assembling this product and have someone assist you. Do
not change the specifications, modify this product, or use for any other purpose
beyond its intended use as a table.
Do not sit or stand on the desk frame. Do not crawl or lie under the desk frame.
•
•
•
•

Components
Table Top
x1
Column
x1
Sub Top
x1
Base
x1
Table Frame Screws
x8
Table Top Screws
x4

Assemble the Sub Top (x1) to the Column (x1) with the Frame Screws (x4). Place the Table Top
(x1) upside down onto a clean, flat surface. Using two people, carefully flip the base
upside-down onto and align the Sub Top (x1) holes to the pilot holes in the Table Top. Tightly
secure the Sub Top to the Table Top using the Table Top Screws (x4).
1
12

While upside-down, assemble the Base (x1) to the frame, and tightly secure with the Frame
Screws (x4). Using two people, carefully flip the assembled table right side up.
2
12

Contact
Have a question, comment, or suggestion?
[e-mail]
branchfurniture.com