Brandstand Cubie User manual

c bie
User Manual

Introduction
Thank you for purchasing the Brandstand Cubie™. This product allows the hotel
to offer more outlets and USB charging to their guests at the desk level. Please be
sure to read this User Manual carefully to ensure proper installation.
The information in this document is subject to change and does not represent a
commitment on the part of Brandstand Products. No part of this document may be
reproduced, transmitted in any form or by any means, electronic or mechanical,
including photocopying, recording, or information storage and retrieval systems, or
translated into any language for any purpose other than the purchaser’s personal
use, without the written permission of Brandstand.
Product Features
• Convenient connections for AC and USB-powered devices
• Efficient and stylish design with multiple mounting options
• Complete surge protection through all AC outlets and/or USB Ports
• Overheating/Overcurrent Protection
Product Description
• 3 AC outlets
• 4 Powered USB ports
• Surge Protector
• Circuit Breaker
• 6ft 14AWG Power Cord with Pass Through Plug
• Rubber Foot
• 2 Allen Bolts
• 2 Wood Screws
• 2 Spacers
• 2 Machine Screws
• Optional L – Shape Mounting Bracket
• Silver and Black Protective Faceplates

Cubie - Front View
AC Outlets
Powered USB Ports
Standard
Mounting Bracket
Power Cord
Optional L-Shape
Mounting Bracket
Allen Bolts
Spacer
Wood Screw &
Rubber Foot
™
Silver or Black
Protective Faceplates

Cubie - Back View
Spacer Wood Screw
Standard Mounting
Bracket
Circuit Breaker
Reset Button
Machine Screw
Power Cord
Optional L-Shape
Mounting Bracket
Allen Bolt
™

Quick Installation Guide
Installation Option #1:
For desks with a lip less than 2 inches
1. Attach L-Shape mounting bracket to the standard mounting bracket with machine
screws (included).

Quick Installation Guide
Installation Option #1:
For desks with a lip less than 2 inches
2. Position Cubie™ on the back of the desk. Tighten allen bolts to secure bracket.

Quick Installation Guide
Installation Option #1:
For desks with a lip less than 2 inches
3. Drill pilot holes at the desired screw location. A 1/16” or 3/32” drill bit should be
used to reduce the risk of splitting the wood. Install wood screws (included) through
bracket and into the pilot holes.
4. Plug directly into wall AC outlet. Do not plug into another surge protector or
extension cord.

Quick Installation Guide
Installation Option #2:
For desks with a lip more than 2 inches or flat back
1.Position Cubie™ on the back of the desk. Drill pilot holes at the desired screw
location. A 1/16” or 3/32” drill bit should be used to reduce the risk of splitting the
wood. (L-Shaped Mounting Bracket not needed)

Quick Installation Guide
Installation Option #2:
For desks with a lip more than 2 inches or flat back
2. Position spacers and install Wood Screws (included) through bracket and into
the pilot holes.
3. Plug directly into wall AC outlet. Do not plug into another surge protector or
extension cord.

Technical Specifications
Continuous Duty Electrical Rating
125VAC 12A 60Hz 1500W
Maximum Energy Dissipation
900J L-N 300J L-G 300J N-G 300J
Maximum Spike Current
36000A L-N 12000A L-G 12000A N-G 12000A
UL Clamping Voltage (3-line)
UL962A 800V
AC Outlets Output
125V 12A
Powered USB Output -
5V/4.8 A shared
EMI/RFI Filtration
150kHz-1000MHz up to 40db
Surge Response Time (ns)
<20 ns
Working Temperature
-40°C – 80°C
Power Cord
6ft 15W 3-line
Housing Material
UL94V-0
Working Surroundings
Indoor Fix

Important Safeguards
• CAUTION – Do not install this device if there is not at least 10 meters (30 feet) or
more of wire between the electrical outlet and the electrical service panel.
• Ensure that the unit is plugged into an AC120V~60Hz outlet. The use of incorrect
outlets could cause the unit to malfunction or catch fire.
• To reduce the risk of fire or electrical shock, do not use this device with a
receptacle in which the slot openings do not align with the blades.
• Do not allow children to operate the unit without adult supervision.
• Always ensure the product is unplugged from the electrical outlet before relocating
or cleaning it.
• Keep the power cord and product away from heated surfaces.
• The unit should not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, should be placed on or around the product.
• Do not place or drop product into water or other liquids. If product falls into water,
immediately unplug it from the electrical outlet; do not pull on power cord.
• Do not put any stress on the power cord where it connects to the product as the
power cord could fray and break.
• Do not plug/unplug the product into/from the electrical outlet with a wet hand.
• Do not operate the product if it has a damaged or cut power cord or adapter, if
wires are exposed, if it malfunctions, if it is dropped or damaged, or if it is dropped
in or exposed to water.
• Place the unit where there is good air circulation.
• This product has no user-serviceable parts. Do not attempt to examine or repair
this product yourself. Only qualified service personnel should perform the servicing;
take the product to an electrical repair shop of your choice for inspection and repair.
• No open flame sources, such as candles, should be placed on the product.
• Product should only be used indoors and in dry locations. It should not be used
with aquariums or other water-related products.

Limited 1 Year Warranty
Products are warranted by Brandstand against manufacturing defects in materials
and workmanship under normal use for one year from the date of purchase.
Defective products will be exchanged for the exact same item.
Return Policy
For a refund or exchange, products must be returned within 30 days of original
purchase date. Customers must contact Brandstand to obtain a Return Merchandise
Authorization (RMA) number and specific shipping instructions prior to returning the
product. Any product returned without a RMA will be refused. Product must be in
original box with original accessories and packaging in undamaged, clean and
brand-new condition. Products that are incomplete, damaged or have been used will
require a deduction in refund. There is a 30% restocking fee on all returned
products. Refunds will be issued by check. Refund checks are mailed the 10th day
from the date the product is returned. Delivery charges and customized products are
non-returnable.
Disclaimer of Damages
In no event shall Brandstand, or its suppliers, be liable for indirect, incidental, or
consequential damages, loss of profit, loss of use or data, or interruption of
business, whether the alleged damages are labeled in tort, contract, or indemnity,
even if Brandstand or its suppliers has been advised of the possibility of such
damages. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation may not apply.
Important: This product’s USB outlets cannot be used as a USB hub and does not
transmit data. The powered USB outlets on this unit are intended solely for charging
devices that can be charged via a USB interface.

Brandstand
801 E. Campbell Rd. Suite 620
Richardson, TX 75081, USA
877-843-3681
www.brandstand.com
The Brandstand Difference
Surge Protection
All Brandstand Cubie products pass:
• UL1449 Surge Protection Devices Standard
• UL 962A for Furniture Power Distribution Units
Liquid Spill Testing
For enhanced safety, the Cubie Product Line was designed for and successfully
passed a UL spill test conducted by our ETL testing lab.
Pass-Through Power
The pass-through power plug allows another device (i.e. lamp or alarm clock) to be
plugged into the same wall outlet used by the Cubie Product.
© 2016 TXS Industrial Design Inc. d.b.a. Brandstand
Brandstand is a registered trademark of TXS Industrial Design, Inc. in the United States