BRAYER BR2008 User manual

Instruction manual
Инструкция по эксплуатации
Electric grill press BR2008
Электрический гриль-пресс BR2008
brayer.ru

СОДЕРЖАНИЕ
EN......................................................................................................................................3
DE....................................................................................................................................13
RU ...................................................................................................................................24
KZ....................................................................................................................................35

3
EN
PRESS GRILL BR2008
The grill is used for cooking meat, sh or
vegetables. The unit can be used as a press grill or
a at frying surface.
DESCRIPTION
1. Control panel
2. Magnetic lock of the lower working surface
3. Lower working surface
4. Upper working surface
5. Magnetic lock of the upper working surface
6. Handle
7. Lock of the upper and lower parts of the grill/
regulator of the gap between the working surfaces
«»
8. Grill opening button «180°»
9. Tray
10. Temperature symbol in Celsius «°С»
11. Timer digital symbols
12. Temperature symbol in Fahrenheit «°F»
13. Celsius or Fahrenheit temperature selection button
«F/ С»
14. Frying plate temperature/timer operating setting
buttons «+/-»
15. Grill on/o󰀨 button « »
16. Upper frying plate temperature digital readings
17. Upper frying plate on button « »
EN
ATTENTION!
For additional protection it is reasonable to install a
residual current device (RCD) with nominal operation
current not exceeding 30 mA into the mains. To install
RCD, contact a specialist.
18. Timer on button « »
19. Lower frying plate on button « »
20. Lower frying plate temperature digital readings
21. Frying plate temperature/timer operating setting
buttons «+/-»

4
EN
1
2
3
4
5
6
7
8
9
10
1716
11
18
12
19
13
20
14
21
15
Рис. 1
Рис. 2

5
EN
SAFETY MEASURES AND OPERATION
RECOMMENDATIONS
Read the operation manual carefully before using
the press grill; after reading, keep it for future
reference.
• Use the press grill for its intended purpose only, as
specied in this manual.
• Mishandling the grill can lead to its breakage and
cause harm to the user or damage to the user’s
property, which is not covered by warranty.
• Make sure that the operating voltage of the unit
indicated on the label corresponds to your home
mains voltage.
• Connect the power plug to the socket with reliable
grounding contact.
• To avoid re, do not use adapters for plugging the
press grill in.
• Do not connect the unit to any external timers or
remotely controlled electrical outlets.
• Install and use the press grill on a at, dry, steady
and heat-resistant surface with free access to the
mains socket.
• Do not use the unit outdoors.
• It is recommended not to use the unit during lightning
storms.
• Protect the grill from impacts, falling, vibrations and
other mechanical stress.
• Never leave the unit connected to the mains
unattended.
• Do not use the unit near heating appliances, heat
sources or open ame.
• Do not use the grill in places where aerosols are
used or sprayed, and in proximity to inammable
liquids.
• Do not use the grill in proximity to the kitchen sink, in
bathrooms, near swimming pools or other containers
lled with water.
• If the grill has fallen into the water, immediately
unplug the power cord from the electrical outlet,
and only then the device can be removed from the
water. Contact our service center to have the device
examined or repaired.
• Do not let the power cord touch hot surfaces and
sharp edges of furniture.
• The press grill body heats up strongly during
operation, do not touch hot surfaces marked with
«» to avoid burns.
• Do not move the press grill when it is hot; wait until it
cools down completely.
• Use the unit in places with proper ventilation.
• Use only the removable parts supplied with the press
grill.
• Do not switch the press grill on without products.
• Do not use the grill for cooking frozen food,defrost
frozen food before cooking.

6
EN
• Beware of steam output from the gaps between the
operating surfaces, do not touch and do not place
open parts of your body near the gaps between the
frying plates.
• Take the products out of the press grill right after
cooking; keeping products in the operating grill for a
long time can cause their ignition.
• Never use metal objects to take the cooked food
out, as they can damage the non-stick coating of the
frying plates; use the kitchen tools intended for non-
stick surfaces.
• Unplug the unit after usage or before cleaning. When
unplugging the grill, hold the power plug and carefully
remove it from the mains socket, do not pull the
power cord, as this can lead to its damage and cause
a short circuit.
• Do not touch the unit body, the power cord and the
power plug with wet hands.
• For child safety reasons do not leave polyethylene
bags used as packaging unattended.
ATTENTION! Do not allow children to play with
polyethylene bags or packaging lm. Danger of
su󰀨ocation!
• Do not allow children to touch the operating surface,
the unit body, the power cord or the power plug
during operation of the unit.
• Be especially careful if children or disabled persons
are near the operating unit.
• During the unit operation and breaks between
operation cycles, place the unit out of reach of
children.
• The unit is not intended for usage by persons
(including children) with physical, sensory ,
psychological or mental disabilities or when they
lack experience or knowledge if they are not under
supervision of a person who is responsible for their
safety or if they are not instructed by this person on
the usage of the unit.
• From time to time check the power cord integrity.
• If the power cord is damaged, it should be replaced
by the manufacturer, a maintenance service or
similar qualied personnel to avoid danger.
• Do not repair the unit by yourself. Do not
disassemble the unit by yourself, if any malfunction
is detected, and after the unit was dropped, unplug it
and apply to the authorized service center.
• To avoid damages, transport the unit in the original
package.
• Keep the unit in a dry cool place out of reach of
children and disabled persons.
• The unit is not intended for usage by children.
• Do not leave children unattended to prevent using
the unit as a toy.

7
EN
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, DO NOT USE THE UNIT FOR COMMERCIAL
OR LABORATORY PURPOSES.
BEFORE THE FIRST USE
After unit transportation or storage at negative
temperature, unpack it and wait for 3 hours before
using.
• Unpack the unit and remove all the packaging
materials.
• Keep the original package.
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the device for damages; do not plug a
damaged device into the mains.
• Make sure that the indicated specications of the
power supply voltage of the unit correspond to the
specications of your mains. When using the device
in the mains with a frequency of 60 Hz, no additional
actions are required.
• Clean the grill body surface with a slightly damp cloth
and then wipe it dry.
• Move the lock (7) to the position « », take the
handle (6) and open the grill.
• Remove the upper working surface (4), grasp the
two sides of the upper part of the working surface
(4), at the level of the magnetic lock (5) and remove
it downwards.
• Remove the lower working surface (3), grasp the two
sides of the lower part of the working surface (3),
at the level of the magnetic lock (2) and remove it
upwards.
• Remove the tray (9).
• Wash the frying plates (3, 4) and the tray (9) with
warm water and neutral detergent, rinse them and
wipe dry.
• Install the surfaces (3, 4) in place, to do this, align
the protrusions on the body and the recesses in the
lower part of the surfaces (3, 4), and then lift the
upper surface (3) and bring the lower surface (4)
down until the magnetic locks (2, 5) are triggered,
make sure that the surfaces (3, 4) are xed.
• Place the grill keeping at least a 20 cm gap between
the grill body and the walls and 60 cm of space
above the grill.
• Use the grill on a at steady surface, away from
sources of moisture,
• heat and open ame with free access to the mains
socket.
• Do not place and do not use the grill near highly
inammable objects
• or liquids and objects subject to thermal deformation.
• Use the unit in places with proper ventilation.
• Make sure that the tray (9) is installed to its place.
• Before using the grill open it and oil the frying plates
(3, 4) slightly.

8
EN
• Plug the unit in, the on/o󰀨 button (15) « » indicator
will light up and start ashing.
• Press the on/o󰀨 button (15) « », the symbols «---»
will appear.
• Switch the lower frying plate (3) on by pressing the
button (19) « » and the upper frying plate (4) by
pressing the button (17) « », the digital symbols (16,
20) will show the frying plates heating temperature
(3, 4) «200» degrees set by default. The digital
symbols (16, 20) will ash 5 times, and then the grill
will switch on and heat the frying plates (3, 4).
• During heating of the frying plates (3, 4) the button
(19) « » and (17) « » indicators will glow green.
When the set temperature is reached, the button (19)
« » and (17) « » indicators will glow white.
• After 5-7 minutes switch the grill o󰀨 by pressing the
on/o󰀨 button (15) « », unplug it and wait until the
grill cools down completely. Take the handle (6), open
the grill and remove the remaining vegetable oil from
the frying plates (3, 4) with a paper towel.
• The grill is ready to use.
Notes:
- when using the unit for the rst time, a foreign
smell or some smoke from the heating elements
can appear — this is normal and it is not covered
by warranty.
- the control buttons are sensory, so you just need
to touch the button. Each touch is accompanied
with a sound signal.
FOOD COOKING WITH THE GRILL
ATTENTION!
- The press grill body heats up strongly during
operation, do not touch hot surfaces marked with «
» to avoid burns.
- Beware of steam output from the gaps between
the operating surfaces, do not touch and do not
place open parts of your body near the gaps
between the frying plates.
- Do not use the grill for cooking frozen food.
- Do not cook meat with large bones.
- Frying time depends on the products used.
- Before using the grill make sure that the tray (9) is
installed to its place.
- Do not open the grill after switching it on, the frying
plates (3, 4) heat up faster and more even in the
closed position.
- Before eating make sure that the food is cooked
through.
- Take the products out of the press grill right after
cooking; keeping products in the operating grill for
a long time can cause their ignition.
- Never use metal objects to take the cooked food
out, as they can damage the non-stick coating
of the frying plates (3, 4); use the kitchen tools
intended for non-stick surfaces.
• Prepare the necessary products.

9
EN
Notes:
- working surfaces (3, 4) are double-sided, one side
is «at», the other side is «grooved», choose the
desired side and install the working surfaces into
the grill;
- The working surfaces (3, 4) are xed with
magnets, before turning on the grill, make sure
that the working surfaces (3, 4) are securely xed;
- before removing the working surfaces (3, 4), make
sure that they are cold.
• lug the unit in, the on/o󰀨 button (15) « » indicator
will light up and start ashing.
• Press the on/o󰀨 button (15) « », the symbols «---»
will appear.
• Switch the lower frying plate (3) on by pressing the
button (19) « » and the upper frying plate (4) by
pressing the button (17) « », the digital symbols (16,
20) will show the frying plates heating temperature
(3, 4) «200» degrees set by default. The digital
symbols (16, 20) will ash 5 times, and then the grill
will switch on and heat the frying plates (3, 4).
• During heating of the frying plates (3, 4) the button
(19) « » and (17) « » indicators will glow green.
When the set temperature is reached, the button (19)
« » and (17) « » indicators will glow white.
• Notes: - select the temperature readings in Celsius
or Fahrenheit by pressing the button (13) «F/C»,
the symbols (10) «°С» or (12) «°F» will light up, the
digital symbols (16, 20) will show the temperature of
frying plates (3, 4) in «°С» or «°F».
• Cooking temperature setting
• To change the heating temperature of the lower frying
plate (3), press the button (19) « » and set the
required temperature of the lower frying plate (3) by
pressing the buttons (14, 21) «+/-».
• To change the heating temperature of the lower frying
plate (4), press the button (17) « » and set the
required temperature of the lower frying plate (4) by
pressing the buttons (14, 21) «+/-».
• You can set the frying plates (3, 4) temperature within
the range from 80° to 230° with setting step 15°.
• Cooking time setting
• To set the cooking time, press the timer button (18) «
», the digital symbols (11) will display the default
time of «30» minutes.
• Press the buttons (14, 21) «+/-» to change the timer
operation time.
• You can set the timer operation time within the range
from 1 to 99 minutes.
Notes: during the countdown of the remaining timer
operation time the button (18) « » will be glowing
green. When the set time is over, you will hear a sound
signal, the grill will switch o󰀨, all indicators will go out,
except for the ashing indicator of the on/o󰀨 button (15)
«».
• Take the handle (6) and open the grill.

10
EN
• Carefully put the products on the lower frying plate
(3), avoid burns by possible splashes of juice or fat
dripping from the products.
• Take the handle (6) and lower the upper frying plate
(8) on the products.
Note: depending on the thickness of the cooked
products you can adjust the clearance between the
frying plates (3, 4). To do this, move the lock (7) handle
to the required position « » (pic. 2).
• After you nish cooking, take the handle (6) and lift
the upper frying plate (8).
• Put the prepared products into an appropriate dish;
use wooden or heat-resistant plastic kitchen tools to
remove the products.
• To switch the grill o󰀨 in an emergency, press the on/
o󰀨 button (15) « », unplug the unit.
Using the grill as a cooking unit (pic. 1)
• You can use the grill as a at frying surface.
• Before connecting the power plug to the mains
socket open the grill. To do this, take the handle (6)
and lift the upper part of the grill.
• Press the button (8) «180°» and open the grill
completely.
• Plug the unit in, the on/o󰀨 button (15) « » indicator
will light up and start ashing.
• Switch the grill of by pressing the on/o󰀨 button (15)
«».
• Switch the required frying plate (3, 4) by pressing the
buttons (19) « » and (17) « » or switch both frying
plates on.
• If necessary, set the required temperature of the
frying plates (3, 4) by pressing again the buttons (19)
« » and (17) « » and the buttons (14, 21) «+/-».
• Wait until the frying plates (3, 4) heat up, the buttons
(19) « » and (17) « » will glow white.
• Switch the timer on by pressing the timer on button
(18) « ». If necessary, set the required timer
operation time within the range from 1 to 99 minutes
by pressing the buttons (14, 21) «+/-».
• Carefully place the products on the working surfaces
(3, 4), be careful to avoid burns by possible splashes
of fat or juice from the products.
• When the set operation time of the grill is over, you
will hear a sound signal, and the grill will switch o󰀨.
All indicators will go out except for ashing indicator
of the on/o󰀨 button (15) « ».
• Put the prepared products into an appropriate dish;
use wooden or heat-resistant plastic kitchen tools to
remove the products.
• To switch the grill o󰀨 in case of emergency, press the
on/o󰀨 button (15) « » and unplug the unit.
• Wait until the grill cools down completely, then lift the
upper part of the grill, press the button (8) «180°»
and fold the upper and the lower parts together.
• To x the lower and the upper parts of the grill set the
lock (7) handle to the position « ».