BREEO LUXEVE FIRE PIT WHITE RIVER User manual

LUXEVE
FIRE PIT
USER GUIDE

HOW TO BUILD
A BETTER FIRE
STEP 1
Prepare your fuel. Paper, cardboard, pine
needles, and dryer lint all make great starter
materials. You’ll also want a good supply of dry
kindling and split hardwood.
STEP 2
Build a base of starter material in the center
of your re pit. Add a layer of kindling and a
match. No need for lighter uid. Just like your
grandad did it.
STEP 3
Take things one log at a time. After the
re takes, slowly feed it more kindling. Once
you’ve got that good and going, it’s time for
your split hardwood.
STEP 4
Don’t add logs haphazardly. Building
tipi, lean-to, or log-cabin style means better
airow for your re. Remember, the blaze
needs to breathe.
STEP 5
As your re burns, keep it evenly spread
throughout the re pit.
BREEO TIP
Arranging a few embers directly
against the inner wall of your Breeo
keeps smoke at bay.

PROPER BURN
TECHNIQUES
The Luxeve Fire Pit is
designed for outdoor use
only. Never use your Luxeve
Fire Pit in a building,
garage, or any enclosed
area.
Always place your Luxeve
Fire Pit on a level, reproof
surface such as rock,
stone or dirt. Never use
your Luxeve on wooden or
composite decks, stamped
concrete or any heat
sensitive surface.
Do not move or store your
Luxeve until all ashes and
coals are extinguished and
all surfaces have cooled
completely. Never touch
ashes or coals to see if
they are hot.
All surfaces of the re pit
will become extremely
hot when in use. To avoid
burns, don’t touch any
part of the re pit until it’s
completely cool (unless
you’re using protective gear
like hot pads, potholders,
etc.).
Exercise the same caution
you would with any open
re. When using your
Luxeve Fire Pit, never leave
it unattended, especially
around children and pets.
The Luxeve Fire Pit utilizes a double-wall, secondary
combustion design to reduce smoke during use. When
the re is burning, the walls of the re pit heat up and hot
air rises through the gap between the two walls. The air
exits the wall cavity through the line of holes around the
inside rim. This pressurized, heated oxygen mixes with the
smoke and causes it to reburn. Use the following tips to
maximize the smoke reduction of your Luxeve Fire Pit.
!FOR YOUR SAFETY
Only burn dry, well-seasoned hardwoods such as maple, oak, hickory,
cherry, and birch. This ensures a hot, steady burn, which helps your
re pit reduce smoke. Wet, green, or soft wood (like pine or cedar)
will produce more smoke.
For maximum smoke reduction, both the bottom and side walls need
to be as hot as possible. The hotter the walls become, the more air
is forced through the rim, burning away smoke before it leaves the
re pit. So, keep your re burning as hot as possible. Keep hot coals
directly against the inside wall of the re pit. And never use a grate
in the bottom of your re pit: a grate keeps logs off the bottom of
your re pit, not allowing the bottom to attain the heat needed for
smoke reduction.
At the start of your re, allow about 15 minutes for smoke to dissipate
as the re pit’s walls heat up. Adding logs to your re causes the re
to temporarily burn cooler, so add new logs one at a time to avoid
an increase of smoke.
To extinguish the re, simply allow it to go out on its own if possible.
However, if extinguishing can’t wait, use a minimal amount of water
to douse the ames. Excess water sitting on the bottom of the re
pit can cause rusting, so use just enough water to put out the re.
X AIRFLOW™
Raised air vents off the
bottom of the fire pit
enables oxygen to come
in even after ash build up.
DOUBLE-WALL
SECONDARY
COMBUSTION
Fire heats walls and
hot air rises through the gap
between the two walls.
The air then exits through
holes around the rim, which
mixes with the smoke
and causes it to reburn.
X AIRFLOW™
Raised air vents off the
bottom of the fire pit
enables oxygen to come
in even after ash build up.
DOUBLE-WALL
SECONDARY
COMBUSTION
Fire heats walls and
hot air rises through the gap
between the two walls.
The air then exits through
holes around the rim, which
mixes with the smoke
and causes it to reburn.

TENDING
TO YOUR
FIRE PIT
Your Luxeve Fire Pit is built out of a high
quality 304 stainless steel, which should never
rust, allowing you leave your re pit out in
the elements all year long! This material will
naturally develop a beautiful patina nish over
time and requires no maintenance.
Because of the X Airow™ technology
incorporated in your Luxeve Fire Pit, expect to
clean out your Luxeve Fire Pit only after 3-6
burns or once the ash has reached the holes in
the X Airow™ base. Wait until your Luxeve Fire
Pit has cooled completely, then use a Breeo Ash
Removal Tool or small hearth shovel to scoop
out the ashes and dispose of in a safe area.
Always clean the ashes out of your Luxeve
Fire Pit before storing or if not in use for long
periods of time.
WWW.BREEO.CO
(800) 413 -9848
CONT[email protected]
Breeo, LLC warrants to the original purchaser that the
Breeo Fire Pits and Accessories are free from work-
manship and material defects during the lifetime of the
original purchaser. In addition Breeo, LLC warrants no
rust through or burn through for a period of ve (5) years
from purchase. If a product is covered by this limited
warranty, Breeo, LLC, at its option, will repair or replace
with a new product free of charge, excluding any applica-
ble shipping and handling charges. If the product being
warranted has been discontinued, the replacement prod-
uct will be of equal or similar value. Altering any Breeo
product, or using the product in any way other than the
intended use, will void this Lifetime Warranty. Except as
provided above, no warranty is offered on rust, paint or
nishes due to being made with material with potential
for corrosion. Steel products will develop a natural iron
oxide patina over time.
Breeo, LLC’s liability and obligation is limited to repair or
replacement of the product, at their option. The purchas-
er must provide Breeo, LLC with photos of the product’s
defects for evaluation. Upon approval of warranty, Breeo,
LLC will issue a return for repair, or return for exchange
of the defective product.
This warranty does not cover damage or product failure
caused by normal wear and tear, accident, misuse,
negligence, tampering, modications, act of war, over-
loading, improper attachment, improper maintenance,
or failure to maintain. Breeo, LLC is held harmless for
any injury or death caused by the misuse of this product.
This warranty does not cover damage caused by proper
or improper use of our products to any surrounding
surfaces, structures, or furnishings. This includes, but is
not limited to, discoloration or damage to a patio or deck
surface, furniture, house, or any other structure.
This warranty gives you specic legal rights providing
said product is put to its proper designated use.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE
WARRANTY OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE. NO ORAL AGREEMENT, GUAR-
ANTEE, PROMISE, REPRESENTATION OR WARRANTY
SHALL BE BINDING. IN NO EVENT WILL BREEO, LLC BE
LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES EVEN IF BREEO, LLC HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAG-
ES AND EVEN IF BREEO, LLC HAS KNOWLEDGE THAT
FAILURE TO PERFORM COULD CAUSE CONSEQUENTIAL
ECONOMIC LOSSES. IN ANY EVENT, CUMULATIVE DAM-
AGES FOR BREACH OF THIS WARRANTY WILL BE LIM-
ITED TO THE AMOUNT ACTUALLY PAID TO BREEO, LLC
FOR THE PRODUCT. THIS PARAGRAPH SHALL APPLY TO
ALL ACTIONS RELATED TO THE PRODUCT, WHETHER
BASED ON TORT, CONTRACT OR OTHER THEORIES. THE
PURCHASER ACKNOWLEDGES THAT THIS PARAGRAPH
ALLOCATES THE RISK OF PRODUCT FAILURE BETWEEN
BREEO, LLC AND THE PURCHASER, AND THAT THIS
ALLOCATION IS REFLECTED IN THE PRICE PAID.