brel-motors DC-101 User manual

Page 1
BREL motors is part of:
Manual Brel external receiver
Type DC-101
Read the manual before you begin the installation. If these instructions are not followed,
this may lead to defects and injury in which warranty can’t be claimed.
____________________________________________________
Technical data of the receiver Type DC-50
- Voltage: 230V 50Hz
- Power output: 800W
- Radio frequency: 433.92MHz
- Moisture and dust resistance: IP55
- Temperature range of the motor: - Normal use: -10℃to +40℃
- Heavy use : -20℃to +70℃
____________________________________________________
Button specification
Up
Channel- Channel+ P2 Mode
Down Time
Works with these BREL motors and receivers:
Motors: MR, MEV, MCE, MDE, MLE, MJE, MTE, MEQ, MPE.
Receivers: DC-50, DC-90, DC-92, DC-94, DC-101, DC-109, DC-114, DC-227, DC-252,
DC-253, DC-292, DC-305, DC-306, DC-2702.
____________________________________________________
Installation of the receiver Reach
L1 = 200 meter L2 = 35 meter
Electric roller Electric roller
shutter shutter
DC-101 DC-101

Page 2
____________________________________________________
Wiring diagram Best Distance
____________________________________________________
Reading multiple transmitters in the memory of the motor
1xP2 1x ˄
Long beep Long beep
Power on. Press 1x P2 Press 1x up
button.
To remove a transmitter, repeat the above.
____________________________________________________
Delete all channels
1x P2 1x P2
Long beep Lange piep
Power on. Press 1x P2 Press 1x P2 All transmitters
. button receiver. Button transmitter. have been
removed.
____________________________________________________
Setting the pulse control
1x P2 1x ˅
Long beep Lange piep
Power on. Press 1x P2 Press 1x down Pulse control is
button. ready for use.
To remove the pulse control, repeat the above procedure.