Bresser Analyth LCD User manual

Microscope · Mikroskop ·
Analyth LCD
EN Instruction manual
DE Bedienungsanleitung

DE
Besuchen Sie unsere Website über den folgenden QR Code oder Weblink um weitere
Informationen zu diesem Produkt oder verfügbare Übersetzungen dieser Anleitung zu
nden.
EN
Visit our website via the following QR Code or web link to nd further information on this
product or available translations of these instructions.
FR
Si vous souhaitez obtenir plus d’informations concernant ce produit ou rechercher ce
mode d’emploi en d’autres langues, rendez-vous sur notre site Internet en utilisant le
code QR ou le lien correspondant.
NL
Bezoek onze internetpagina via de volgende QR-code of weblink, voor meer informatie
over dit product of beschikbare vertalingen van deze gebruiksaanwijzing.
ES
¿Desearía recibir unas instrucciones de uso completas sobre este producto en un idioma
determinado? Entonces visite nuestra página web utilizando el siguiente enlace (código
QR) para ver las versiones disponibles.
IT
Desidera ricevere informazioni esaustive su questo prodotto in una lingua specica?
Venga a visitare il nostro sito Web al seguente link (codice QR Code) per conoscere le
versioni disponibili.
www.bresser.de/P5809100
www.bresser.de/warranty_terms
GARANTIE · WARRANTY · GARANTÍA · GARANZIA
DE
Besuchen Sie unsere Website über den folgenden QR Code oder Weblink um weitere
Informationen zu diesem Produkt oder verfügbare Übersetzungen dieser Anleitung zu
nden.
EN
Visit our website via the following QR Code or web link to nd further information on this
product or available translations of these instructions.
FR
Si vous souhaitez obtenir plus d’informations concernant ce produit ou rechercher ce
mode d’emploi en d’autres langues, rendez-vous sur notre site Internet en utilisant le
code QR ou le lien correspondant.
NL
Bezoek onze internetpagina via de volgende QR-code of weblink, voor meer informatie
over dit product of beschikbare vertalingen van deze gebruiksaanwijzing.
ES
¿Desearía recibir unas instrucciones de uso completas sobre este producto en un idioma
determinado? Entonces visite nuestra página web utilizando el siguiente enlace (código
QR) para ver las versiones disponibles.
IT
Desidera ricevere informazioni esaustive su questo prodotto in una lingua specica?
Venga a visitare il nostro sito Web al seguente link (codice QR Code) per conoscere le
versioni disponibili.
www.bresser.de/P5809100
www.bresser.de/warranty_terms
GARANTIE · WARRANTY · GARANTÍA · GARANZIA

English................................................................................................................... 4
Deutsch ................................................................................................................. 12

4 / 20
1 Imprint (German)
Bresser GmbH
Gutenbergstr. 2
46414 Rhede
Germany
http://www.bresser.de
For any warranty claims or service enquiries, please refer to the information on "Warranty" and "Ser-
vice" in this documentation. We apologize for any inconvenience caused by the fact that we cannot
process enquiries or submissions sent directly to the manufacturer's address.
Errors and technical changes excepted.
© 2021 Bresser GmbH
All rights reserved.
The reproduction of this documentation - even in extracts - in any form (e.g. photocopy, print, etc.) as
well as the use and distribution by means of electronic systems (e.g. image file, website, etc.) without
the prior written permission of the manufacturer is prohibited.
The designations and brand names of the respective companies used in this documentation are gen-
erally protected by trade, trademark and/or patent law in Germany, the European Union and/or other
countries.
2 Validity note
This documentation is valid for the products with the following article numbers:
5809100
Manual version: 0221
Manual designation:
Manual_5809100_Analyth-LCD_en-de_BRESSER_v022021a
Always provide information when requesting service.
3 About this Instruction Manual
NOTICE
These operating instructions are to be considered a component of the device.
Read the safety instructions and the operating manual carefully before using this device.
Keep this instruction manual in a safe place for future reference. When the device is sold or given to
someone else, the instruction manual must be provided to the new owner/user of the product.
4 Intended use
• This device is not intended for use by persons (including children) with impaired physical, sensory
or mental abilities, or for lack of experience and/or knowledge, unless they are supervised by or
have received instructions from a person responsible for their safety on how to use this device.
• This device is for personal use only.
• It was developed for an magnified representation of nature observations.
• The device is intended only for indoor use.

5 / 20
5 General safety instructions
DANGER
Risk of an electric shock!
This device contains electronic parts that are powered by a power source (AC adapter and/or batter-
ies). Improper use of this product may result in electric shock. Electric shock can cause serious or fatal
injuries. It is therefore imperative that you observe the following safety information.
• Disconnect the power supply by pulling the mains plug when the appliance is not in use, in case of
a longer interruption of operation and before any maintenance and cleaning work.
• Place your device so that it can be disconnected from the power supply at any time. The power
outlet should always be near your appliance and should be easily accessible, as the plug of the
power cord serves as a disconnect device from the mains supply.
• To disconnect the unit from the mains, always pull the mains plug and never pull the cable!
• Check this device, cables and connections for damage before use.
• Never attempt to operate a damaged device, or a device with damaged electrical parts! Damaged
parts must be replaced immediately by an authorized service agent.
• Operate the device only in a completely dry environment and do not touch the device with wet or
damp body parts.
DANGER
Danger of suffocation!
Improper use of this product may result in suffocation, especially for children. It is therefore imperative
that you observe the following safety information.
• Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a danger
of choking!
• This product contains small parts that can be swallowed by children! Choking hazard!
• If small parts are swallowed, consult a doctor immediately!
DANGER
Explosion hazard!
Improper use of this product may result in fire. It is essential that you observe the following safety in-
formation in order to avoid fires.
• Do not expose the device to high temperatures. Use only the supplied AC adapter. Do not short-
circuit the device or batteries or dispose of in fire! Excessive heat and improper handling can
cause short circuits, fires and even explosions!
CAUTION
Risk of body injury!
This device contains components and/or accessories that can cause minor or serious body injury if
used improperly. It is therefore essential that you observe the following safety information in order to
prevent body injuries.
• Sharp-edged and pointed tools are often used for working with this device. Therefore, keep this
device and all accessories and tools in a place inaccessible to children. Danger of body injury!

6 / 20
• Chemicals and liquids do not belong in children's hands! Don't drink! Clean hands thoroughly un-
der running water after use. In case of accidental contact with eyes or mouth, rinse with water. In
case of complaints, consult a doctor immediately and show the substances.
CAUTION
Fire hazard!
Improper use of this product may result in fire. It is essential that you observe the following safety in-
formation in order to avoid fires.
• Never cover the ventilation slots or cooling fins of the device during operation or until it has cooled
down completely!
NOTICE
Danger of material damage!
Improper handling may result in damage to the unit and/or accessories. Therefore, use the device only
in accordance with the following safety information.
• Do not disassemble the device! In the event of a defect, please contact your dealer. They will con-
tact the Service Center and can arrange the return of this device for repair if necessary.
• Do not expose the device to high temperatures and protect it from water and high humidity.
• Do not subject the device to excessive vibrations.
• Only use accessories and spare parts for this device that comply with the technical specifications.
6 About this microscope
Since this microscope is a digital microscope, it is only suitable for visual observation to a limited ex-
tent.
It is equipped with a lens and a camera sensor for capturing images. The digital images can be viewed
directly on the built-in LCD display or optionally stored on a MicroSD memory card*.
*not included
7 Choice of location
Choose a suitable location before installation and commissioning.
Place the device on a stable, level and vibration-free surface.

7 / 20
8 Parts overview and scope of delivery
1
2
3
5
6
7
10
9
14
13
15
17
18
12
11
16
19
20
21
8
A
D
E
26
24
25
14
4
B
23
22
C
F
Illustration1: All parts of the microscope
1 LCD display (movable) 2 Memory card slot (MicroSD card*)
3 Function light (display) 4 USB-A port (mouse*)
5 Coarse focus 6 Friction adjustment
7 Fine focus 8 Incident lighting
9 On/Off switch 10 DC connection socket (power)
11 Function lights (incident light brightness) 12 Function lights (transmitted light brightness)
13 Translucent lighting 14 Object plate, exchangeable
15 Object clamps 16 Function light (voltage)
17 "Tra" button (translucent lighting) 18 "Inc" button (incident lighting)
19 Objective 20 Zoom ring
21 Microscope head 22 Mouse
23 USB A connector 24 Mains plug
25 DC barrel connector 26 Hook wrench
*not included

8 / 20
Scope of delivery:
Microscope (A), mouse (B), power adapter (C), object plate (black/white) (D), object plate (semi-trans-
parent) (E), hook wrench (F)
For object measurements, the use of a micrometer scale slide is recommended.
9 Power supply
S3
S2
S1
S1 Connection socket for DC barrel con-
nector
S2 DC barrel connector
S3 Mains plug
1. Insert the DC barrel connector of the mains adapter into the DC connection socket of the device.
2. Insert the mains plug of the mains adapter into the socket.
The function light for the power supply is on. The device is ready for use.
10 Turning on/off the device
1. Move On/Off switch to position 'I' to turn on the device.
2. Move On/Off switch to 'O' position to turn off the device.
11 Adjusting the zoom
The microscope optics have a zoom range from 0.7x to 4.5x.
The zoom range can be changed by turning the zoom ring.
NOTICE!When changing the zoom range, the focus may also need to be adjusted. (see also "Fo-
cusing the object")
12 Focusing the object
The microscope has coarse and fine focusing. These can be used for object focusing as described be-
low.
1. Make the desired zoom setting.
2. Focus on the observation object using coarse focusing.
3. If necessary, adjust the object sharpness individually by fine focusing, especially when changing
the zoom setting and/or the height of the microscope head.

9 / 20
13 Adjusting the friction
F1 F2
Illustration2: Friction adjustment on the focus wheel (left or right, depending on model).
F1 Focus wheel F2 Bore
The friction for focusing can be adjusted individually as follows:
1. Loosen the clamping screw for the counter ring and move the counter ring down completely.
2. Hold the microscope head with one hand and loosen the locking screw.
3. Continue to hold the microscope head. Insert the hook wrench into the bore on the drive shaft. By
turning the wrench, the friction adjustment can be either tightened or loosened.
4. Check the friction setting by turning the focus wheel.
WARNING!If the friction setting is too loose, the microscope head may move downward by it-
self. The microscope optics and/or other attached components can thus be damaged due to a
shock!
NOTICE!The tighter the friction setting, the more stiffly is the focus wheel.
14 Working with the onscreen menu
1. Connect the mouse* to the USB-A port of the microscope.
2. Move the On/Off switch to the "I" position.
3. Position the object on the object plate and set the appropriate illumination (see “Adjusting the illu-
mination”)
4. An image of the object is shown on the LCD display and the mouse pointer is visible.
5. Move the mouse pointer to the left or bottom edge of the display to show the desired display
menu.
Left display menu
Image capturing: Clicking this button will take a photo. Info appears briefly: "Image capture successful"
Video: Clicking this button starts a video record. Info appears briefly: "Recording in progress...". In the
upper right corner the recording time starts to run. Clicking the button again will stop the video. Info
appears briefly: "Video successful".
Preview: You can view captured photos and videos in the preview. Double-click to display the desired
image. Press the "Back" button to return to the live image. Within the preview you can scroll and also
delete photos.

10 / 20
Measurement: In order to take measurements with the microscope, a reference is required to calibrate
the software.
For this purpose we recommend our microscope slide with micrometer scale: Art. No. 5916720.
Detailed information on measurement can be found in the further instructions.
Settings: The camera operates in automatic mode by default. Changing the settings is recommended
only for experienced users.
Menu language: German, English, French, Chinese.
Date and time: The clock continues to run as long as the power supply is established.
Bottom display menu
Zoom in: Click the icon several times to zoom in up to 10 times (digital zoom)
Zoom out: Click the icon several times to reset the magnification step by step
Mirroring: Horizontal image mirroring
Rotation: Image rotation by 180 degr.
Black and white: Image display in grayscales
HDR: Function for improved image reproduction at different brightness ranges
Freeze frame: Stops the live image. No recording is made. Click again to start.
Grid: Display of a grid or scale bar as a cross. For more information, see "Grid settings"
Color: Adjusting the display of lines and labels for the measurement function
Comparison: A previously taken photo is placed next to the live image
15 Save recordings
1. Put the microscope into operation.
2. Insert a suitable memory card* into the memory card slot.
3. CAUTION!The contacts of the memory card must face to the back of the display. Memory
cards that are inserted incorrectly can cause electrical damage. The recordings stored on the
memory card can be irreversibly deleted and the device may be damaged.
4. Image captures or videos can be saved to the memory card via the display menu (see "Working
with the onscreen menu").
*MicroSD card up to maximum 32 GB (not included)
16 Grid settings
1. Put the microscope into operation.
2. Set the desired grid setting in the onscreen menu:
Activating the scale bar displays a cross with a grid. This shows the scale of the set calibration
value.
By activating "activate all" a grid pattern is evenly distributed on the screen.
3. With "Reset grid" the original grid is set again.
4. In the "Grid settings" all lines can be adjusted.
5. Click "Save" to confirm the settings.
6. Click on "Back" to exit the menu.