Bresser 7803510 User manual

WI-FI WEATHER STATION
WLAN-WETTERSTATION
Professional Wi-Fi Weather Station with 7-in-1 Multisensor
Professionelle WLAN-Wetterstation mit 7in1-Multisensor
Art. No. WSX3001000000
7803510
7902541
GB
INSTRUCTION MANUAL
DE
BEDIENUNGSANLEITUNG

2
DE Besuchen Sie unsere Website über den folgenden QR Code oder Weblink
um weitere Informationen zu diesem Produkt oder die verfügbaren
Übersetzungen dieser Anleitung zu nden.
GB Visit our website via the following QR Code or web link to nd further
information on this product or the available translations of these
instructions.
FR Si vous souhaitez obtenir plus d’informations concernant ce produit ou
rechercher ce mode d’emploi en d’autres langues, rendez-vous sur notre
site Internet en utilisant le code QR ou le lien correspondant.
NL Bezoek onze internetpagina via de volgende QR-code of weblink, voor
meer informatie over dit product of de beschikbare vertalingen van deze
gebruiksaanwijzing.
ES ¿Desearía recibir unas instrucciones de uso completas sobre este producto
en un idioma determinado? Entonces visite nuestra página web utilizando
el siguiente enlace (código QR) para ver las versiones disponibles.
IT Desidera ricevere informazioni esaustive su questo prodotto in una lingua
specica? Venga a visitare il nostro sito Web al seguente link (codice QR
Code) per conoscere le versioni disponibili.
www.bresser.de/PWSX3001000000 www.bresser.de/P7803510 www.bresser.de/P7902541
www.bresser.de/warranty_terms
GARANTIE · WARRANTY · GARANTÍA · GARANZIA
RECYCLAGE (TRIMAN/FRANCE)

3
Product Art.No.
Base station + 7-in-1 Sensor + TH Sensor WSX3001000000
Only 7-in-1 Sensor (Type: 7803510/HC1) 7803510
Only Base station 7902541
GB
INSTRUCTION MANUAL ...............4
DE
BEDIENUNGSANLEITUNG .........33
https://www.wunderground.comhttps://weathercloud.net
WORKS WITH:
WU APP DOWNLOAD:
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and
other countries. App Store is a service mark of Apple Inc., registered in the U.S.
and other countries.
Google Play and the Google Play logo are trademarks of Google Inc.
https://www.awekas.at
AWEKAS
Weather Underground is a registered trademark of The Weather Channel, LLC. both in the United States and internationally. The Weather Underground Logo is a
trademark of Weather Underground, LLC. Find out more about Weather Underground at www.wunderground.com

4
ABOUT THIS INSTRUCTION MANUAL
These operating instructions are to be considered a component of the device.
Please read the safety instructions and the operating instructions carefully before use.
Keep these instructions for renewed use at a later date. When the device is sold or given to someone else,
the instruction manual must be provided to the new owner/user of the product.
This symbol represents a warning. To ensure safe use, always adhere to the instructions described in
this documentation.
This symbol is followed by a user’s tip.
GENERAL WARNINGS
•Risk of electric shock — This device contains electronic components that operate via a power
source (batteries). Children should only use the device under adult supervision. Only use the device
as described in the manual; otherwise, you run the risk of an electric shock.
• Choking hazard —Children should only use the device under adult supervision. Keep packaging
material, like plastic bags and rubber bands, out of the reach of children, as these materials pose a
choking hazard.
• Risk of chemical burn —Keep batteries out of the reach of children! Make sure you insert the
batteries correctly. Leaking battery acid can lead to chemical burns. Avoid contact of battery
acid with skin, eyes and mucous membranes. In the event of contact, rinse the affected region
immediately with a plenty of water and seek medical attention.
• Risk of re/explosion —Do not expose the device to high temperatures. Use only the
recommended batteries. Do not short-circuit the device or batteries, or throw them into a re.
Excessive heat or improper handling could trigger a short-circuit, a re, or an explosion.
• Do not disassemble the device. In the event of a defect, please contact your dealer. The dealer will
contact the Service Centre and can send the device in to be repaired, if necessary.
• Use only the recommended batteries. Always replace weak or empty batteries with a new, complete
set of batteries at full capacity. Do not use batteries from different brands or with different
capacities. The batteries should be removed from the unit if it has not been used for a long time.
SCOPE OF DELIVERY
Base station, 7-in-1 Multisensor, Thermo-Hygro Indoor sensor, AC/DC adapter (5V)
BEFORE YOU BEGIN
• We recommend using alkaline batteries. If temperatures regularly fall below 0°C (32°F), we
recommend using lithium batteries.
• Avoid using rechargeable batteries. (Rechargeable batteries cannot maintain correct power
requirements.)
• Insert batteries before rst use, matching the polarity in the battery compartment. Connect the AC/
DC adapter with the Base station and insert 3x AAA batteries as backup power. 3x AA batteries are
required for the 7-in-1 Multisensor and 2x AA batteries for the Thermo-Hygro indoor sensor.

5
GB
TABLE OF CONTENTS
ABOUT THIS INSTRUCTION MANUAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
GENERAL WARNINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
SCOPE OF DELIVERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
OVERVIEW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
CONSOLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
LCD DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
WIRELESS 7-IN-1 SENSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
INSTALLATION AND SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
INSTALL WIRELESS 7-IN-1 SENSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
SETUP THE CONSOLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
SYNCHRONIZING ADDITIONAL WIRELESS SENSOR(S) (OPTIONAL) . . . . . . . . . . . . 10
POINTING THE WIRELESS 7-IN-1 SENSOR TO SOUTH . . . . . . . . . . . . . . . . . . . . 10
CREATE WEATHER SERVER ACCOUNT & SETUP WI-FI CONNECTION . . . . . . . . . . . 11
CREATE WEATHER UNDERGROUND ACCOUNT . . . . . . . . . . . . . . . . . . . . . . . . 11
CREATE WEATHERCLOUD ACCOUNT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
SETUP WI-FI CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
CREATE AWEKAS ACCOUNT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
SETUP THE WEATHER SERVER CONNECTION. . . . . . . . . . . . . . . . . . . . . . . . . 15
ADVANCE SETTING IN WEB INTERFACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
VIEW YOUR WEATHER DATA IN WUNDERGROUND . . . . . . . . . . . . . . . . . . . . . . 17
VIEWING YOUR WEATHER DATA IN WEATHERCLOUD . . . . . . . . . . . . . . . . . . . . 17
FIRMWARE UPDATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
OTHER SETTING & FUNCTIONS OF THE CONSOLE . . . . . . . . . . . . . . . . . . . . . . 18
SETTING ALARM TIME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
ACTIVATING ALARM AND TEMPERATURE PRE-ALARM FUNCTION . . . . . . . . . . . . . 20
TEMPERATURE / HUMIDITY FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
TREND INDICATOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
WIND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
WEATHER INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
WEATHER FORECAST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
BAROMETRIC PRESSURE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
RAIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
LIGHT INTENSITY, UV INDEX & SUNBURN TIME . . . . . . . . . . . . . . . . . . . . . . . . 25
MAX / MIN DATA RECORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
PAST 24 HOURS HISTORY DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
WEATHER ALERT SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
BACKLIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
DISPLAY CONTRAST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
BATTERY REPLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
WIRELESS 7-IN-1 SENSOR MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
TROUBLESHOOT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
CONSOLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
WIRELESS 7-IN-1 SENSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
WIRELESS THERMO-HYGROMETER SENSOR . . . . . . . . . . . . . . . . . . . . . . . . . 32
EC DECLARATION OF CONFORMITY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
NOTES ON CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
DISPOSAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
WARRANTY & SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

1
INTRODUCTION
Thank you for selecting WI-FI weather station with 7-in-1 professional sensor. This system gathers and
automatically uploads accurate and detail weather data to Weather Underground and Weathercloud website
- the famous weather service which allows weather observers to upload their local weather data with
automated personal weather stations (PWS) - at which you can access and upload your weather data freely.
This product o󰀨ers professional weather observers or serious weather enthusiasts robust performance with
a wide range of options and sensors. You will get your own local forecast, high/lows, totals and averages for
virtually all weather variables without using a PC / Mac.
The 7-in-1 sensor which measures outdoor temperature, humidity, wind, rain UV and Light together with
up to 7 individual temperature humidty sensors, which can add to a sensor array of maximum 7 units
continually, transmits weather data to the console. Both sensors are fully assembled and calibrated for your
easy installation. They send data at a low power radio frequency to the console from up to 150m/450 feet
away (line of sight).
In the console, high-speed processors are embedded to analyze the received weather data and these real-
time data can be published to Wunderground.com and weathercloud.net through your home Wi- router.
The console can also synchronize with internet time server to show high precision time and for its weather
data time stamp. The color LCD display shows informative weather readings with advanced features, such
as high/low alert alarm, di󰀨erent weather index, and MAX/MIN records. With calibration, sunrise / sunset and
moon phase features, this system is truly a remarkably personal yet professional weather station for your
own backyard.
NOTE:
This instruction manual contains useful information on the proper use and care of this product. Please read
this manual through to fully understand and enjoy its features, and keep it handy for future use.
OVERVIEW
CONSOLE
WI-FI
SENSOR REFRESH ALERTALARMCLOCK
SET
RESET OFF LO HI
DC 5V 1A
ALARM / SNOOZEBARO WIND SUN RAIN
6
7
8
9
10
11
13
12
20
22
23
17
16
15
14
19
18
21
3 4 521
1. [ BARO ] key
2. [ WIND ] key
3. [ ALARM/SNOOZE ] key
4. [ SUN ] key
5. [ RAIN ] key
6. LCD display
7. [ / ] key
8. [ INDEX / ] key
9. [ HISTORY ] key
10.[ MAX / MIN ] key
11. [ CHANNEL ] key
12.[ CLOCK SET ] key
13.Wall mounting holder
14.[ REFRESH ] key
15.[ SENSOR / WI-FI ] key
16.[ RESET ] key
17.[ °C / °F ] key
18.[ ALARM ] key
19.[ ALERT ] key
20.[ OFF / HI / LO ] slide
switch
21.Battery door
22.Table stand
23.Power jack

2
GB
LCD DISPLAY
1
23
4
56
7
89
10 11
Display section:
1. Outdoor temperature & humidity
2. Wind direction & speed
3. Indoor (Ch) temperature & humidity
4. Weather index
5. UV index & light intensity (SUN)
6. Weather forecast
7. Calendar & moon phase
8. Time / alarm
9. Barometer
10.Sunrise & sunset time
11. Rainfall & Rain rate

3
WIRELESS 7-IN-1 SENSOR
16
15
14
12
13
11
10
2
3
6
1
4
5
7
9
8
1. Rain collector
2. Balance indicator
3. UVI / light sensor
4. Wind vane
5. Wind cups
6. Antenna
7. Solar panel
8. Radiation shield and
thermo-hygro sensor
9. Drain holes
10.Battery door
11. Red LED indicator
12. [ RESET ] key
13.Mounting clamp
14.Adjustable hinge of solar
panel
15.Tipping bucket
16.Rain sensor
INSTALLATION AND SETUP
INSTALL WIRELESS 7-IN-1 SENSOR
INSTALL WIND VANE
With reference to photo below, (a) locate and align the at are on the wind vane shaft to the at surface on
the wind vane and push the vane onto the shaft. (b) tighten the set screw with a precision screwdriver.
Step 1 Step 2

4
GB
INSTALL RAIN GAUGE FUNNEL
Install the rain gauge funnel and rotate clockwise to lock the funnel to the sensor array
Step 2
Step 1
Lock
grooves
INSTALL BATTERIES
Unscrew the battery door at bottom of unit. Insert the 3 AA batteries (non-rechargeable) according to the
+/- polarity indicated. The red LED indicator on the back of the sensor array will turn on, and then begin
ashing every 12 seconds.
ADJUST THE SOLAR PANEL
The tilting angle of solar panel can be adjusted vertically from 0° into 15°, 30°, 45° and 60° positions
depending on the area you are living in. For optimal power output year-round, please set the tilt angle that
is closest to your latitude.
E.g.,
Location (latitude, longitude) Solar panel tilt angle
45°
60°
30°
15°
0°
Hamburg (53.558, 9.7874) 60°
Chicago (42.1146, -88.0464) 45°
Houston (29.7711, -95.3552) 30°
Bangkok (14.2752, 100.5684) 15°
Sydney (-33.5738, 151.3053) * 30°
*Sensors installed in Southern Hemisphere must have their solar panels facing North.
Step 1: Loosen the screw lightly until the gears on the
opposite side separated from lock position.

5
Step 2: Push the screw inward until the gears on the
opposite side separated from lock position.
Step 3: Adjust the vertical angle of the solar panel (0°, 15°,
30°, 45°, 60°) according to the latitude of your location.
Step 4: Push the gear and tighten the screw until the gears
are securely locked.
MOUNTING KIT INSTALLATION
1.Pole mounting stand x 1 2.Mounting clamp x 1 3.Plastic pole x 1
4.screws x 4 5.Hex nuts x 4 6.Flat washers x 4
7.screw x 1 8.Hex nut x 1 9.Rubber pads x 4

6
GB
PLASTIC MOUNTING INSTALLATION
1. Fasten the plastic pole onto your x pole with mounting base, clamp, washers, screws and
nuts. Following below 1a, 1b, 1c sequences:
1a. Insert the plastic pole into the hole of the mounting
stand, and then secure it with the screw and nut. 1c. Fasten the mounting stand and clamp together onto a x pole with
4 long screws and nuts.
1b. Apply 2 rubber pads on the mounting clamp.
2. Apply 2 rubber pads on the inner
sides of the mounting base and
clamp of the sensor-array, and
loosely fasten them together.
3. Place the sensor-array over the mounting pole
and align it to North direction before fastening
the screws.

7
NOTE:
- Any metal object can attract lightning strikes, including your sensor-array mounting pole.
Never install sensor-array in stormy days.
- If you want to install a sensor-array on a house or building, consult a licensed electrical
engineer to ensure proper grounding. Direct lightning impact on a metal pole can damage or
destroy your home.
- Installing the sensor at high location may result in personal injury or death. Perform as many
initial inspections and operations as possible on the ground and in buildings or houses. Only
install the sensor-array on clear, dry days.
DIRECTION ALIGNMENT
Install the wireless 7-in-1 sensor in an open
location with no obstructions above and around the
sensor for accurate rain and wind measurement.
Locate the North (N) marker on top of the 7-in-1
sensor and align the marker to point North upon
nal installation with a compass or GPS. Tighten
the mounting bracket around a 30 to 40 mm
diameter pole (not included) using two screw and
nuts provided.
Use the bubble level on the 7-in-1 sensor to make
sure the sensor is completely level for proper
measurement of rainfall, UV and light intensity.
North marker on top of the 7-in-1 sensor.
Use the bubble level on the 7-in-1 sensor to make sure
the sensor is completely level for proper measurement of
rainfall.
Point to
NORTH Point to
SOUTH
2 meters
o󰀨 the
ground
Mounting pole
not included
POINTING THE WIRELESS 7-IN-1 SENSOR TO SOUTH
The outdoor 7-IN-1 sensor is calibrated to point to North for the maximum accuracy. However, for the user's
convenience (e.g. users in the Southern hemisphere), it is possible to use the sensor with the wind vane
pointing to South.
1. Install the 7-IN-1 wireless sensor with its wind meter end pointing to South. (Please refer to
POINTING THE WIRELESS 7-IN-1 SENSOR TO SOUTH section for mounting details)
2. Select "S' in hemisphere section of the setup UI setup page. (Please refer to SETUP THE
WEATHER SERVER CONNECTION section’s SETUP page for setup details)
3. Press Apply icon to conrm and exit.
NOTE:
Changing the hemisphere setting will automatically switch the direction of the moon phase on the display.

8
GB
1.1 WIRELESS HYGRO-THERMO SENSOR
2
5
6
4
7
13
1. LCD display
2. Transmission status LED
3. Wall mounting holder
4. [ CHANNEL ] slide switch
5. [ RESET ]
6. [°C / °F ]
7. Battery compartment
1.1.1 INSTALL WIRELESS INDOOR THERMO-HYGROSENSOR
1. Remove the battery door of the sensor.
2. Use the channel slide switch to set the channel number for the sensor (e.g. Channel 1)
3. Insert 2 x AA size batteries into the battery compartment according to the polarity
information marked on the battery compartment and close the battery door.
4. The sensor is in synchronization mode, and can be registered to the console within the next
few minutes. The transmission status LED is blinking.
NOTE:
- If you need to re-assign the sensor channel, slide the channel slide switch to the new channel
position. For the new channel number to be e󰀨ective, press [ RESET ] on the sensor.
- Avoid placing this sensor in direct sunlight, rain or snow.
1.2 OPTIONAL SENSOR
The weather station works with following optional sensors:
MODEL 7009971 7009972 7009973
NO OF CHANNEL 7
DESCRIPTION Thermo-Hygrometer sensor Soil Moisture and
Temperature Sensor Spa and Pool Thermometer
IMAGE
868MHZ
THERMO-HYGROSENSOR
868MHZ
SOILSENSOR

9
1.3 RECOMMENDATION FOR BEST WIRELESS COMMUNICATION
E󰀨ective wireless communication is susceptible to noise interference in the environment, and distance and
barriers between the sensor transmitter and the display console.
1. Electromagnetic interference (EMI) – these may be generated by machinery, appliances,
lighting, dimmers and computers, etc. So please keep your display console 1 or 2 meters
away from these items.
2. Radio-frequency interference (RFI) – if you have other devices operating on 868 / 915 / 917
MHz, you might experience communication intermittent. Please re-located your transmitter
or display console to avoid signal intermittent problem.
3. Distance. Path loss occurs naturally with distance. This device is rated to 100m (300 feet)
by line of sight (in interference free environment and without barriers). However, typically
you will get 30m (100 feet) maximum in real life installation, which includes passing through
barriers.
4. Barriers. Radio signal are blocked by metal barriers such as aluminum cladding. Please
align the sensor array and display console to get them in clear line of sight through window
if you have metal cladding.
The table below show a typical level of reduction in signal strength each time the signal passed through
these building materials
MATERIALS SIGNAL STRENGTH REDUCTION
Glass (untreated) 10 ~ 20%
Wood 10 ~ 30%
Plasterboard / drywall 20 ~ 40%
Brick 30 ~ 50%
Foil insulation 60 ~ 70%
Concrete wall 80 ~ 90%
Aluminum siding 100%
Metal wall 100%
Remarks: RF signal reduction for reference.
SETUP THE CONSOLE
POWER UP THE CONSOLE
1. Plug the adapter provided to the power jack at the back of the console.
2. Once the console is turned on, all the segments of the LCD will be shown momentarily.
3. The console will automatically enters sensor synchronization mode and AP mode (refer to
SETUP WI-FI CONNECTION).
NOTE:
If no display appears when power up the console. You can press [ RESET ] key by using a
pointed object. If this process still not work, you can remove the backup battery and unplug the
adaptor then re-power up the console again.
SYNCHRONIZING WIRELESS 7-IN-1 SENSOR AND INDOOR SENSOR(S)
Immediately after power up, while still in Synchronization mode, the 7-in-1 sensor and Indoor
Sensor can be paired to the console automatically. Once your sensors are paired up, the
sensors' signal strength indicator and weather reading will appear on your console display.

10
GB
BACKUP BATTERY
Backup batteries are used to keep time-sensitive information on the console’s memory during
power failure. These include:
-Time & Date, Alarm Time, Max/Min & Past 24 hours weather records, Alert setting values,
Sensor(s) channel history, and Units
1. Remove the battery door of the console.
2. Insert 3 new AAA batteries as per the polarity indicated,
3. Replace the battery door.
BUILT-IN MEMORY
The console has built-in FLASH memory that holds the vital settings. These include:
-Time Zone, DST status, Time SYNC status, WI-FI and Weather server setting, Latitude /
Longitude, Hemisphere setting, Calibration values, and Sensor ID of paired sensor(s)
RESET AND FACTORY HARD RESET
To reset the console and start again, press the [ RESET ] key once
To hard reset the console and resume factory settings, press and hold the [ RESET ] key for 6
seconds
RESYNCHRONIZE SENSORS
Press the [ SENSOR / WI-FI ] key once for the console to enter sensor Synchronization mode,
and the console will re-register all the sensors that have already been registered to it before.
i.e. the console will not lose the connection of the sensors that you’d paired up before.
CHANGING BATTERIES AND MANUAL PAIRING OF SENSOR
Whenever you changed the batteries of the wireless indoor or 7-in-1 weather sensor, re-
synchronization must be done manually.
1. Change all the batteries to new ones in the sensor.
2. Press [ SENSOR / WI-FI ] key on the console to enter sensor synchronization mode.
3. Press [ RESET ] key on the wireless indoor or 7-in-1 weather sensor.
SYNCHRONIZING ADDITIONAL WIRELESS SENSOR(S) (OPTIONAL)
The console can support up to 7 additional wireless sensors.
1. Press the [ SENSOR / WI-FI ] key once on the console to enter synchronization mode.
2. Press the [ RESET ] key on the new sensor, and wait for a few minutes for the new sensor
to paired to the console.
NOTE:
- Channel number of the indoor sensor must not be duplicated among the sensors. Please refer
to “INSTALL WIRELESS INDOOR SENSOR” for details
- This console can support di󰀨erent type of additional wireless sensor, e.g. soil moisture and
pool sensor. If you would like to pair up additional sensors, please check with your retailer for
more detail.
POINTING THE WIRELESS 7-IN-1 SENSOR TO SOUTH
The outdoor 7-IN-1 sensor is calibrated to point to North for the maximum accuracy. However,
for the user's convenience (e.g. users in the Southern hemisphere), it is possible to use the
sensor with the wind vane pointing to South.
1. Install the 7-IN-1 wireless sensor with its wind meter end pointing to South. (Please refer to
INSTALLATION OF THE WIRELESS SENSOR section for mounting details)

11
2. Select "S' in hemisphere section of the setup UI setup page. (Please refer to SETUP THE
WEATHER SERVER CONNECTION section for setup details)
3. Press Apply icon to conrm and exit.
NOTE:
Changing the hemisphere setting will automatically switch the direction of the moon phase on the display.
CREATE WEATHER SERVER ACCOUNT & SETUP WI-FI CONNECTION
The console can upload weather data to WUnderground and / or Weathercloud through WI-FI
router, you can follow the step below to setup your device.
NOTE:
The Weather Underground and Weathercloud website are subjected to change without notice.
CREATE WEATHER UNDERGROUND ACCOUNT
1. In https://www.wunderground.com click the "Join" on the top right corner to open the
registration page. Follow the instructions to create your account.
NOTE:
Use the valid email address to register your account.
2. After you have created your account and completed the Email validation, please go back to
the WUndergound web page to login. Then, click “My Prole” button on the top to open the
drop-down menu and click "My Weather Station".
3. In "My Weather Station" page, press the "Add New Device" button to add your device.

12
GB
4. Follow their instruction to enter your station information, in the Step "Tell Us MoreAbout
Your Device", (1) enter a Name for your weather station. (2) choose “Other” in “Device
Hardware” section and ll in other the other information (3) select "I Accept" to accept
Weather underground's privacy terms, (4) click “Next” to create your station ID and key.
(2)
(2)
(3)
(4)
(1)
5. Jot down Your "Station ID" and "Station key" for the further setup step.
CREATE WEATHERCLOUD ACCOUNT
1. In https://weathercloud.net enter your information in "Join us today" section, then follow
the instructions to create your account.
NOTE:
Use the valid email address to register your account.

13
2. Sign in weathercloud and then you will go the "Devices" page, click "+ New" to create new
device.
3. Enter all the information in Create new device page, for the Model* selection box select the
"W100 Series" under "CCL" section. for the Link type* selection box select the "SETTINGS",
Once you have completed, click Create.
4. Jot down your ID and key for the further setup step.

14
GB
SETUP WI-FI CONNECTION
1. When you power up the console for the rst time, the console LCD will show ashing "AP"
and " " icon to signify that it has entered AP (Access Point) mode, and is ready for WI-FI
settings. User can also press and hold the [ SENSOR / WI-FI ] key for 6 seconds to enter
AP mode manually.
2. Use the smart phone, tablet, or computer to connect the console through WI-FI.
3. In PC / Mac choose WiFi network settings or InAndroid / iOS choose setting WI-FI to select
the console’s SSID: PWS-XXXXXX in the list and it will need several second to connect.
PWS-XXXXXX
PWS-XXXXXX
PC (Windows 10) WI-FI network interface Android WI-FI network interface
4. Once connected, enter the following IP address into your internet browser’s address bar, to
access the console’s web interface:
http://192.168.1.1
NOTE :
- Some browsers will treat 192.168.1.1 as a search, so make sure you include http:// header.
- Recommended browsers, such as the latest version of Chrome, Safari, Edge, Firefox or
Opera.
- WI-FI network interface of PC / Mac or mobile subject to change.
CREATE AWEKAS ACCOUNT
You have the possibility to use a weather service of a third party provider, as shown here
with the example of AWEKAS (https://join.awekas.at). Detailed instructions for setting up
AWEKAS are available for download: https://www.bresser.de/download/WSX3001
WI-FI CONNECTION STATUS
Below is the WI-FI icon status on the console LCD:
Stable: Console is in
connection with WI-FI router Flashing: Console is trying to connect to WI-FI router Flashing: Console currently in Access Point (AP) mode

15
SETUP THE WEATHER SERVER CONNECTION
Enter the following information into the below web interface "SETUP" page to connect the
console to weather server, If you do not want to use Wunderground.com or Weathercloud.net,
please empty the station ID & key to ignore the data upload.
nist.time.gov
Server URL:
0.0000 North
*Latitude:
0.0000
Enter 0 to 90, no negative numbers
Enter 0 to 180, no negative numbers
East
*Longitude:
Time server setup
Location for sunrise / sunset
WiFi Router setup
ADVANCED
Wunderground
Station ID: WDw124
******
******
******
IPACIR23Wc
Weather server setup
Station key:
Router:
Add Router
Search
Security type:
Router Password:
WAP2
ROUTER_A
Language: English
Weathercloud
Station ID:
Station key:
******
IDCR21w1
http://WAC.com
Station ID:
URL:
Station key:
Mac address 00:0E:C6:00:07:10
Hemisphere
* Depends on the model
SETUP
Apply
Firmware version: 1.00
0:00
Time Zone:
N
SETTINGS
SETUP page
Press "ADVANCED" icon to
switch to Advanced page
Select setup UI display language
Select router (SSID) for connection
Manually enter SSID if not on list
Select router's security type
(usually "WPA2")
Router's password (leave blank if
security type is "open")
Enter new Station ID and Station key
received from Wunderground
Enter new Station ID and Station key
received from weathercloud
Reserved for validated weather server
Enter new Station ID and Station key
received from corresponding weather
server
Select time server
Select time zone of your location
Select the direction (e.g. for EU
countries Longitude is East and for
US is West)
Select the hemisphere the sensor is
located in (e.g. both US and EU are
"N" and Australia is "S"
Enter the Latitude value
Enter the Longitude
value
Press to allow add
router manually
Press to search for
router
Press to save the settings
NOTE:
- When WI-FI setup is completed, your PC / Mac or mobile will resume your default WI-FI
connection.
- During AP mode, you can press and hold the [ SENSOR / WI-FI ] key for 6 seconds to stop
AP mode and the console will restore your previous setting.
TIME ZONE
To automtically set the time display to your time-zone, change the time zone in SETUP page of
previous section from '0:00' (default) to your time zone (e.g.+1:00 for Germany).
nist.time.gov
Server URL:
Time server setup
0:00
Time Zone: