Bretford CFPS User manual

CFPS
Part #031-1523
Rev. 04.22.08 CZ
Surge Protected Electrical Unit
Assembly Instructions
Qty Part# Description
1 CFPS 4 Outlet Electrical Unit
PARTS LIST
TOOLS REQUIRED
Phillips Screwdriver
Electric Drill (if necessary)
7/64" Drill Bit (if necessary)
OPTION 2
Turn unit over and locate pre-drilled
holes on wood top. Attach E-unit
through holes using screws (AA).
OPTION 1
Lay unit down and locate pre-drilled
holes. Attach E-unit through holes
using screws (AA).
If there are not pre-drilled holes, mark holes with a
pencil in desired location. Drill a 1/2" deep hole with
a 7/64" drill bit and attach E-unit with screws (AA).
NOTE:
HARDWARE LIST
Ref Qty Part# Description
AA 2 02112 #8 x 3/8" Sheet Metal Screws
BB 2 02236 #8-32 Hex Lock Nuts
(use when necessary)
CC 2 030-0302 #8-32 x 3/8" Combo Truss Screws
(use when necessary)
Bretford
11000 Seymour Avenue
Franklin Park, IL 60131
TEL: [phone]
800.521.9614
FAX: [phone]
800.343.1779 www.bretford.com