Breville Control Grip User manual

the Control Grip™
Instruction Book - BSB510XL
BSB510XL_IB_B16.indd 1 7/11/2016 1:33 PM

2
BREVILLE
RECOMMENDS
SAFETY FIRST
At Breville we are very safety
conscious. We design and
manufacture consumer
products with the safety of you,
our valued customer, foremost
in mind. In addition we ask
that you exercise a degree of
care when using any electrical
appliance and adhere to the
following precautions.
IMPORTANT
SAFEGUARDS
READ ALL
INSTRUCTIONS BEFORE
USE AND SAVE FOR
FUTURE REFERENCE
•Remove and safely
discard any packaging
materials and promotional
labels before using the
appliance for the first
time.
•To eliminate a choking
hazard for young children,
remove and safely discard
the protective cover fitted
to the power plug of this
appliance.
•To protect against
electrical shock, do not
immerse the power cord,
power plug or motor body
in water or any other
liquid.
•Do not place the
appliance on or near a hot
gas or electric burner, or
where it could touch any
other source of heat.
2Breville recommends safety first
8Components
9Functions
14 Care & Cleaning
15 Food preparation guide
16 French
Contents
BSB510XL_IB_B16.indd 2 7/11/2016 1:33 PM

3
•Unwind the power cord
fully before use.
•This appliance has a
polarized plug (one blade
is wider than the other).
To reduce the risk of
electric shock, this plug
will fit in a polarized outlet
only one way. If the plug
does not fit fully in the
outlet, reverse the plug.
If it still does not fit,
contact a qualified
electrician. Do not modify
the plug in any way.
•Do not allow the power
cord to hang over the
edge of a table or counter,
touch hot surfaces or
become knotted.
•Always make sure the
appliance is completely
and properly assembled
before operation.
•Always ensure that the
attachments are securely
fitted onto the motor body
before operation. Follow
the instructions provided
in this book.
•Handle the appliance
and attachments with
care – blending blade
and chopping bowl blade
are very sharp. Handle
carefully and keep out of
reach of children.
•To reduce the risk of
injury, always insert the
chopping blade into
the chopping bowl,
then ensure the lid is
securely attached before
connecting to the motor
body and operating.
•Never process ICE or
other hard foods such as
coffee beans, rice, frozen
foods, spices, cereal, or
chocolate bars in the
chopping bowl as damage
to the blades may result.
•Do not use attachments
other than those provided
with the appliance. The
use of attachments not
sold or recommended by
Breville may cause fire,
electric shock or injury.
BSB510XL_IB_B16.indd 3 7/11/2016 1:33 PM

4
•Always ensure the
appliance is unplugged
from the power outlet
before attempting to
assemble any of the
attachments.
•If using the appliance
to blend hot food in a
saucepan, remove the
saucepan from the heat
source and ensure the
liquid is not boiling.
Allow hot food to cool
slightly before blending.
The appliance should be
kept away from any heat
source.
•Extreme caution must
be used when moving an
appliance or container
filled with hot oil or other
hot liquids.
•Do not touch surfaces that
may be hot. Use handles
or knobs provided.
•When mixing liquids,
especially hot liquids, use
a tall container or make
small quantities at a time
to reduce spillage.
•Keep hands and utensils
away from the moving
blending blade and
chopping bowl blade
while blending/chopping
to prevent the possibility
of severe injury to
persons or damage to the
appliance. A spatula may
be used, but must be used
only when the appliance is
not running.
•If food becomes lodged
around the blending blade
or in the blade guard,
release the trigger switch,
unplug the power cord
and remove the blending
shaft from the motor body.
Use a spatula to dislodge
the food. Do not use
fingers as blending blade
is sharp.
•Do not remove the
appliance from
ingredients during
operation. Ensure the
trigger switch has been
released and the motor
has completely stopped
before removing.
BSB510XL_IB_B16.indd 4 7/11/2016 1:33 PM

5
•Avoid contacting moving
parts.
•To turn the appliance off,
release the trigger switch
and remove the plug from
the power outlet. Remove
the plug from the power
outlet if the appliance
is to be left unattended,
if not in use, before
attempting to move
the appliance, before
cleaning, disassembling,
assembling and when
storing the appliance.
•Do not operate this
appliance for longer than
1 minute at a time as this
can cause overheating.
Allow to cool for at least
1 minute between each
use.
•Never mix dry, thick
or heavy mixtures for
more than 15 seconds.
Stop operation and stir
the ingredients before
continuing. Allow the
motor to rest for 1 minute
between each use.
•Strictly follow the care
and cleaning instructions
described in this book.
•This appliance is for
household use only.
Do not use the appliance
for anything other than
its intended purpose as
described in this book.
Do not use outdoors.
Do not use in moving
vehicles or boats.
•Do not leave the appliance
unattended when in use.
•This appliance is not
intended for use by young
children or infirm persons
without supervision.
Young children should be
supervised to ensure that
they do not play with the
appliance.
BSB510XL_IB_B16.indd 5 7/11/2016 1:33 PM

6
•Regularly inspect the
power cord, power plug
and actual appliance
for any damage. Do
not operate if damaged
in any way or after the
appliance malfunctions.
Immediately cease
use of the appliance
and visit www.Breville.
com or call Breville
Consumer Support at
1-866-BREVILLE for
examination, repair or
adjustment.
•For any maintenance
other than cleaning,
visit www.Breville.
com or call Breville
Consumer Support at
1-866-BREVILLE.
SHORT CORD
INSTRUCTIONS
Your Breville appliance
is fitted with a short
power supply cord to
reduce personal injury or
property damage resulting
from pulling, tripping or
becoming entangled with a
longer cord.
If an extension cord is
used, (1) the marked
electrical rating of the
cord set or extension cord
should be at least as great
as the electrical rating of
the appliance, (2) the cord
should be arranged so
that it will not drape over
the countertop or table-
top where it can be pulled
on by children or tripped
over unintentionally and
(3) the extension cord
must include a 3-prong
grounding plug.
BSB510XL_IB_B16.indd 6 7/11/2016 1:33 PM

7
BREVILLE ASSIST®PLUG
Your Breville appliance
comes with a unique
Assist®Plug, conveniently
designed with a finger hole
to ease removal from the
power outlet.
FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
BSB510XL_IB_B16.indd 7 7/11/2016 1:33 PM

8
E
D
A
B
C
F
H
I
K
G
J
Components
A. Motor body
B. Speed control dial
C. Control grip trigger switch
D. Blending shaft
E. Stainless steel blending blade
F. Chopping bowl
G. Stainless steel chopping blade
H. Chopping bowl lid
I. Blending jug
J. Whisk
K. Dual-purpose storage lid and anti-slip mat
BSB510XL_IB_B16.indd 8 7/11/2016 1:33 PM

9
Functions
BEFORE FIRST USE
• Remove any packaging material and
promotional labels. Remove the blending
shaft from the motor body and wash it in
warm soapy water (follow the instructions “To
detach the blending shaft”). Rinse and dry
thoroughly. Ensure no water remains inside
the blending shaft to avoid water running
into the motor body when reattached.
• Disassemble and wash the chopping blade,
chopping bowl, chopping bowl lid, whisk,
storage lid and blending jug in warm soapy
water, rinse and dry thoroughly. Ensure no
water remains in the chopping bowl lid or
whisk attachment to avoid water running into
the motor body when reattached.
NOTE
The detachable blending shaft, chopping bowl,
chopping blade, blending jug, whisk and dual
purpose storage lid/anti-slip mat can also be
washed in the dishwasher. The chopping bowl
lid, whisk gearbox and motor body are not
dishwasher safe – see the care and cleaning
section of this booklet for cleaning instructions
of these parts.
This stick blender is a versatile appliance that
can be attached to:
• The stainless steel blending shaft– for use as
an immersion blender.
• The chopping bowl with chopping blade and
lid – for use as a mini chopper.
• The whisk attachment – for use as a hand
whisk.
IMMERSION BLENDER
To attach the blending shaft
Hold the blending shaft with the blades down,
and align the top end of the blending shaft with
the corresponding end of the motor body and
push until the blending shaft ‘clicks’ and locks
onto the motor body.
Always ensure blending shaft is dry with no
water left inside before reattaching.
To use as an immersion blender
Ensure the blending shaft is assembled to the
motor body as detailed above.
1. Place food to be processed into the
blending jug provided (or a sufficiently
large mixing bowl or saucepan). The jug
provided should only be ½ full or less when
blending liquids or when making a puree of
fruit and/or vegetables.
2. Insert the plug into a 110/120V
power outlet.
3. By turning the speed control dial at the
top of motor body, select a speed between
1 and 15.
Low Speed : 1
High Speed : 15
NOTE
If selecting a high speed, it is recommended
that you start with a slow speed and gradually
increase to the higher speed to avoid
splattering and over-processing.
BSB510XL_IB_B16.indd 9 7/11/2016 1:33 PM

10
4. Place the blending shaft as deeply as
possible into the blending jug and press the
trigger switch to turn the stick blender on.
The button must be held for the required
duration of operation.
5. Work through the ingredients in
the blending jug with a gentle raising and
lowering motion.
6. When processing has finished switch off
the motor by releasing the trigger switch
and remove the power plug from the power
outlet.
7. Ensure the blade has completely stopped
before lifting the stick blender out of the
blending jug.
To detach the blending shaft
Ensure the trigger switch is released and
unplug the power plug from the power outlet.
Hold the motor body with one hand and using
thumb and finger of the other hand, press on
the two EJECT buttons on either side of the
motor body. Pull the motor body away from the
blending shaft to detach.
Recommendations when using as an
immersion blender
• The stick blender mixes foods and liquids
rapidly, therefore it is easy to over-process.
Remember to periodically release the trigger
switch and check food throughout operation.
• Allow food to cool slightly (so not boiling)
before blending.
• The blending shaft allows for hot food to
be processed directly in the saucepan. This
makes blending soups and sauces very easy.
For safety reasons, remove the saucepan from
the heat source before processing.
• Ensure the motor body of the appliance and
power cord are kept away from any
heat source.
• When puréeing and blending, cut food into
uniform sizes. This will ensure smooth and
consistent results.
• Warm all liquids to be added to
soups and purées, this will ensure
even blending.
• Place the blending jug on the anti-slip mat
during blending. This will keep the blending
jug stable.
• Do not operate the stick blender continuously
for more than 1 minute. Allow the motor to
rest for 1 minute between each use.
• DO NOT place stick blender in chopping
bowl to process ingredients.
If food becomes lodged around the blending
blade or in the blade guard, follow these safety
instructions:
1. Release the trigger switch and unplug the
power plug from the power outlet.
2. Use a spatula to carefully dislodge the food.
Do not use fingers as the blending blade is
sharp.
3. After the food has been removed and blades
are clear, plug the appliance back into the
power outlet and continue blending.
BSB510XL_IB_B16.indd 10 7/11/2016 1:33 PM

11
MINI CHOPPER
To attach the chopping blade, chopping bowl
and chopping bowl lid
Remove the blending shaft from the motor
body (follow the instructions on page 10 “To
detach the blending shaft”).
Place the chopping blade onto the metal pivot
pin in the base of the chopping bowl. Place the
food inside the chopping bowl. Do not exceed
the maximum 'MAX' marking.
Place the lid onto the chopping bowl.
Align the motor body with the chopping bowl
lid and push down until the motor body ‘clicks’
into place. Ensure the chopping bowl lid is dry
with no water left inside before reattaching.
NOTE
Always place the chopping blade onto the
pivot pin on the bottom of the chopping bowl
BEFORE placing any food in the bowl. Do not
lift the blade before the complete chopping
operation is finished.
TO USE THE CHOPPING BOWL
Ensure the chopping bowl is completely and
properly assembled.
1. Place food to be processed into the
chopping bowl. Do not exceed the 'MAX'
marking on the chopping bowl.
2. Insert the plug into a 110/120V
power outlet.
3. By turning the speed control dial at the
top of motor body, select a speed between
1 and 15.
Low Speed : 1
High Speed : 15
4. Press the trigger switch to turn the mini
chopper on. The button must be held for
the required duration of operation.
5. When processing has finished switch off
the motor by releasing the trigger switch
and remove the power plug from the power
outlet.
BSB510XL_IB_B16.indd 11 7/11/2016 1:33 PM

12
6. Ensure the blade has completely stopped
before removing the lid from the chopping
bowl. Carefully remove the chopping blade
and use a spatula to scrape off any attached
food back into the chopping bowl. Use the
spatula to remove food from the chopping
bowl.
To detach the chopping bowl and lid
Ensure the trigger switch is released and
unplug the power plug from the power outlet.
Hold the motor body with one hand and using
thumb and finger of the other hand, press on
the two EJECT buttons on either side of the
motor body. Pull the motor body away from the
chopping bowl lid to detach.
Recommendations when using the stick
blender with the chopping bowl
• Do not operate the chopping bowl
when empty.
• The anti-slip mat keeps the chopping bowl
stable, however it is recommended during
processing to hold the motor body with one
hand and the chopping bowl and lid with
the other.
• When processing, cut food into uniform sizes
to ensure quicker, even and more consistent
results.
• To avoid damage to the chopping/mixing
blade, do not process, or grind hard items
such as frozen foods, ice, cereals, rice, spices,
chocolate bars or coffee beans.
• DO NOT process boiling or hot foods in the
chopping bowl.
• NEVER remove the blade from the chopping
bowl before food processing is completed.
• The chopping bowl blends foods and liquids
rapidly, therefore it is easy to over process.
Remember to periodically release the trigger
switch and check food throughout operation.
WHISK
To attach the whisk
Remove blending shaft from motor body
(follow the instructions on page 10 “To detach
the blending shaft”).
Align the top end of the whisk gearbox with
the corresponding end of the motor body and
push until the whisk ‘clicks’ and locks onto the
motor body.
Ensure the whisk gearbox is dry with no water
left inside before re-attaching.
To use the whisk
Ensure the whisk is completely and properly
assembled.
1. Place food to be whisked into the blending
jug or a sufficiently large mixing bowl or
container.
2. Insert the plug into a 110/120V
power outlet.
3. By turning the speed control dial at the
top of motor body, select a speed between
1 and 15.
Low Speed : 1
High Speed : 15
BSB510XL_IB_B16.indd 12 7/11/2016 1:33 PM

13
4. Place the whisk into the blending jug
and press the trigger switch to turn the
whisk on. The button must be held for the
required duration of operation.
5. Move the whisk through the ingredients in
the blending jug with a gentle raising and
lowering motion until desired texture is
achieved.
6. When whisking has finished, switch off the
motor by releasing the trigger switch and
remove the power plug from the power
outlet.
7. Ensure the whisk has completely stopped
rotating before lifting the whisk out of the
blending jug.
To detach the whisk
Ensure the trigger switch is released and
unplug the power plug from the power outlet.
Hold the motor body with one hand and using
thumb and finger of the other hand, press on
the two EJECT buttons on either side of the
motor body. Pull the motor body away from the
whisk to detach.
Recommendations when using the stick
blender with the whisk attachment
• Do not allow the whisk to hit the bottom or
sides of mixing bowl while the appliance is in
operation, as this may damage the whisk.
• To incorporate air into the ingredients
when whisking, use a sufficiently deep, wide
container and move the whisk through
the ingredients with a gentle raising and
lowering action.
• Place the mixing bowl on a damp cloth
during whisking. This will keep the mixing
bowl stable.
• Always use fresh chilled cream and fresh
eggs at room temperature to achieve greater
and more stable volume when whisking.
• Always ensure the whisk and mixing bowl
are completely clean and free of fat before
whisking egg whites.
• It is recommended to use the
highest speed when whisking egg whites and
cream.
BSB510XL_IB_B16.indd 13 7/11/2016 1:33 PM

14
Care & Cleaning
MOTOR BODY
Remove the power plug from power outlet
before cleaning. To remove any food residue,
wipe the motor body and cord with a damp
cloth only. Do not use abrasive cleaners or steel
wool. Never immerse the motor body in water
or any other liquid. Do not place motor body in
dishwasher.
BLENDING SHAFT
Remove the power plug from power outlet
before cleaning. Remove the motor body from
the blending shaft. The blending shaft can be
hand washed in hot soapy water, rinsed and
dried thoroughly after each use. Alternatively,
the blending shaft can also be washed in the
dishwasher. Do not use abrasive cleaners or
steel wool.
QUICK WASH: Between each processing
task, with the motor body attached, place the
blending shaft and blending blade only into a
jug of water and press the trigger switch to turn
on for 5 seconds. This will remove any food on
the blending blade and allow you to continue
onto the next processing task.
CHOPPING BOWL, CHOPPING
BOWL LID, CHOPPING BLADE AND
STORAGE LID/ANTI-SLIP MAT
Remove the power plug from power outlet
before cleaning. Remove the motor body from
the chopping bowl lid, and then remove the
chopping bowl lid and chopping blade from
the chopping bowl.
The chopping bowl, chopping bowl lid and
chopping blade should be hand washed in
hot soapy water, rinsed and dried thoroughly
after each use. Alternatively, the chopping
bowl and chopping blade can be washed in the
dishwasher. Do not wash the chopping bowl lid
in the dishwasher. Do not use abrasive cleaners
or steel wool.
WHISK
Remove the power plug from power outlet
before cleaning. Remove the motor body from
whisk. The whisk can be hand washed in hot
soapy water, rinsed and dried thoroughly after
each use. Alternatively, the whisk can also be
washed in the dishwasher. Do not use abrasive
cleaners or steel wool.
Remove the whisk from the whisk gearbox
before placing in the dishwasher.
NOTE
The whisk gearbox is not dishwasher safe.
whisk gearbox
BLENDING JUG AND STORAGE LID/
ANTI-SLIP MAT
The blending jug and storage lid/anti-slip
mat can be hand washed in hot soapy water,
rinsed and dried thoroughly after each use.
Alternatively, the blending jug and storage
lid/anti-slip mat can also be washed in the
dishwasher. Do not use abrasive cleaners or
steel wool.
STORAGE
Remove the power plug from power outlet
before storing. Ensure the appliance is clean
and completely dry.
Insert the chopping blade into the chopping
bowl then attach the chopping bowl lid. Place
the assembled chopping bowl inside the
blending jug. Attach the storage lid/anti-slip
mat to the bottom of the blending jug.
BSB510XL_IB_B16.indd 14 7/11/2016 1:33 PM

15
Food Preparation Guide
FOOD TYPE ATTACHMENT
TYPE
SPEED
SETTING
DURATION INSTRUCTIONS
Milkshakes, smoothies,
cocktails, fruit frappes Blending shaft mid to maximum 30 seconds Use Chilled milk. Blend until desired consistency is achieved.
Soups, dips, baby food Blending shaft mid to
maximum 30 seconds Blend until smooth.
Cheese Chopping bowl maximum 20-30 seconds Maximum weight ½ lb/200g,
pre-cut into ¾ inch/2cm cubes
Carrot Chopping bowl maximum 20-30 seconds Maximum weight ½ lb/200g,
pre-cut into ¾ inch/2cm cubes
Onion Chopping bowl mid 20 seconds Maximum weight 1oz/30g
Nuts Chopping bowl mid to
maximum 20-30 seconds Maximum weight 5oz/150g
Red meat, chicken fillets,
fish fillets Chopping bowl mid to maximum 20-30 seconds Maximum weight ½ lb/200g, pre-cut into ¾ inch/2cm cubes
Ice Blending leg maximum 20-30 seconds
Cream (1½ cup/400ml
maximum)
Egg whites (4 eggs
maximum)
Light batters
Whisk mid to
maximum 20-30 seconds
Do not operate the immersion blender continuously for more than 1 minute. Allow the motor to
rest for 1 minute between each use. This is especially important when mixing dry, thick or heavy
mixtures. Never mix for more than 15 seconds. Stop operation and stir the ingredients before
continuing.
BSB510XL_IB_B16.indd 15 7/11/2016 1:33 PM

16
the Control Grip
Manuel d'instructions - BSB510XL
BSB510XL_IB_B16.indd 16 7/11/2016 1:33 PM

17
BREVILLE VOUS
RECOMMANDE
LA SÉCURITÉ
AVANT TOUT
Chez Breville, la sécurité
occupe une place de choix.
Nous concevons et fabriquons
des produits de consommation
sans jamais perdre de vue la
sécurité de notre précieuse
clientèle. De plus, nous
vous demandons d'être très
vigilant lorsque vous utilisez
un appareil électrique et de
respecter les mesures de
sécurité décrites ci-dessous.
IMPORTANTES
MESURES DE
SÉCURITÉ
LISEZ TOUTES LES
INSTRUCTIONS AVANT
USAGE ET CONSERVEZ-
LES À TITRE DE
RÉFÉRENCE.
•Lisez attentivement toutes
les instructions avant de
faire fonctionner l’appareil
pour la première fois
et conservez-les pour
référence future.
•Retirez et disposez
de tout matériel
d’emballage ou étiquettes
promotionnelles avant
d’utiliser l’appareil pour la
première fois.
•Afin d’éliminer les risques
de suffocation chez les
jeunes enfants, retirez et
disposez du capuchon
protecteur recouvrant la
fiche de l’appareil.
17 Breville vous recommande la
sécurité avant tout
23 Composants
24 Fonctions
29 Entretien & nettoyage
30 Guide de préparation des aliments
Table des
matières
BSB510XL_IB_B16.indd 17 7/11/2016 1:33 PM

18
•Afin de vous protéger
contre les chocs
électriques, n’immergez
pas le cordon, la fiche ou
le corps du moteur dans
l’eau ou tout autre liquide.
•Ne placez pas l’appareil
sur ou près d’un élément
chauffant au gaz ou
électrique, et évitez qu’il
soit en contact avec toute
autre source de chaleur.
•Déroulez complètement
le cordon d’alimentation
avant l’usage.
•Cet appareil est muni
d’une fiche polarisée (une
lame est plus large que
l’autre). Afin de réduire
le risque d’électrocution,
cette fiche s’insère d’une
seule façon dans une
prise électrique polarisée.
Si elle ne s’insère pas
parfaitement, inversez-la.
Si le problème persiste,
contactez un électricien
qualifié. Ne modifiez la
fiche d’aucune façon.
•Ne laissez pas le cordon
pendre d’une table ou
d’un comptoir, entrer en
contact avec des surfaces
chaudes ou se nouer.
•Veillez toujours à ce
que l’appareil soit
complètement et
correctement assemblé
avant de le faire
fonctionner.
•Veillez toujours à ce que
les accessoires soient
solidement fixés au
corps du moteur avant
l'opération. Suivez les
instructions fournies dans
ce livret.
•Manipulez l'appareil et les
accessoires avec soin - les
lames du pied-mélangeur
et du bol hachoir sont très
coupantes et doivent être
laissées hors de la portée
des enfants.
BSB510XL_IB_B16.indd 18 7/11/2016 1:33 PM

19
•Pour réduire les risques
de blessures, insérez
toujours la lame à hacher
dans le bol hachoir, puis
assurez-vous que le
couvercle est solidement
fixé avant d'assembler le
tout au corps du moteur
et de faire fonctionner
l'appareil.
•Ne traitez jamais de
GLACE ou autres
aliments coriaces comme
les grains de café, le riz,
les aliments congelés,
les épices, les céréales
ou les barres de chocolat
dans le bol hachoir, car
des dommages à la lame
peuvent en résulter.
•N'utilisez par
d'accessoires autres
que ceux fournis avec
l'appareil. L’utilisation
d’accessoires non vendus
ni recommandés par
Breville peut causer un
risque d’incendie, de
chocs électriques ou de
blessure.
•Assurez-vous toujours que
l'appareil est débranché
de la prise murale avant
d'y assembler l'un ou
l'autre des accessoires.
•Si vous utilisez l'appareil
pour mélanger des
aliments chauds dans un
poêlon, retirez le poêlon
du feu et assurez-vous
que le liquide n'est pas
bouillant.
Laissez les aliments tiédir
légèrement avant de les
mélanger. L'appareil ne
doit pas être utilisé à
proximité d'une source de
chaleur.
•Soyez extrêmement
prudent lorsque vous
manipulez un appareil
ou un contenant rempli
d'huile chaude ou de tout
autre liquide chaud.
•Ne touchez pas aux
surfaces chaudes de
l'appareil. Utilisez les
poignées ou boutons de
l'appareil.
BSB510XL_IB_B16.indd 19 7/11/2016 1:33 PM

20
•Lorsque vous mélangez
des liquides, et
particulièrement des
liquides chauds, utilisez
un contenant profond ou
traitez de petites quantités
à la fois pour éviter les
déversements.
•Gardez les mains et les
ustensiles loin de la lame
à mélanger ou de la lame
du bol hachoir durant
l'opération, pour prévenir
les risques de blessures
graves ou de dommages
à l'appareil. Utilisez une
spatule quand l'appareil
sera éteint.
•Si les aliments se
logent autour de la
lame à mélanger ou
du protecteur de lame,
relâchez la touche de
commande, débranchez
l'appareil et retirez le pied-
mélangeur du corps du
moteur. Ne vous servez
pas de vos doigts, car les
lames sont très coupantes.
•Ne soulevez pas l'appareil
hors du récipient durant
l'opération. Assurez-
vous que la touche de
commande est relâchée
et que le moteur est
complètement arrêté
avant de retirer l'appareil
des ingrédients.
•Ne touchez pas aux
pièces en mouvement de
l'appareil.
•Pour éteindre l'appareil,
relâchez la touche de
commande et débranchez
l'appareil de la prise
murale.
•Débranchez l'appareil
s'il est laissé sans
surveillance, s'il n'est pas
en fonction, ou avant de
le déplacer, le nettoyer, le
démonter, l'assembler ou
le ranger.
•Ne faites pas fonctionner
l'appareil plus d'une
minute à la fois, pour
éviter les risques de
surchauffe. Laissez-le
tiédir au moins une
minute entre chaque
utilisation.
BSB510XL_IB_B16.indd 20 7/11/2016 1:33 PM