Breville JK46 User manual

PLEASE RETAIN THESE INSTRUCTIONSFOR FUTURE REFERENCE.
jug kettle
Instructions for Use
PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
These instructions refer to the Breville Cordless Kettle JK46.
3KW concealed element

2
4
5
6
9
1 Multi-directional power base
for left or right handed use
2 Easy clean, fast boil 3000W
concealed element
3 Twin water windows with
capacity markings
4 Handle
5 Illuminating On/Off switch
6 Hinged lid with lid release latch
7 Spout
8 Removable, washable, anti-
scale filter (not shown)
9 Cord storage with cable exits
FEATURES OF YOUR BREVILLE CORDLESS JUG
KETTLE
2
7
3
1
8

3
BEFORE USING YOUR KETTLE
1 Remove any packaging and
promotional material from the
kettle and position on a dry,
level, secure work surface.
2 Before connecting to a power
source, make sure your mains
supply voltage is the same as
the one indicated on the bottom
of this appliance.
3 Viewing the external water
windows, fill the kettle to the
maximum capacity (without the
power base). See how to use
section, page 4.
4. Bring to the boil and then discard
the water. This removes any
residues that may have
remained from the
manufacturing process. Remove
and rinse the filter before use.
See cleaning the filter section,
page 6.

4
HOW TO USE
1 With the kettle switched off,
connect the plug into a suitable
power outlet. When the kettle is
switched off, there is no
illumination of the On/Off switch.
2 Remove the kettle from the
power base before filling with
water.
3 Do not fill through the spout.
4 To open the lid, pull the lid latch
backwards towards the On/Off
button, then push the lid back
until it rests on its hinge.
5 Fill through the top, observing
the capacity markings on the
water windows.
Be sure to replace the lid to
ensure optimum operation.
6 Fill the kettle with no less than
the minimum amount of water
(approximately 0.5 litres) and no
more than the maximum level
mark allows (1.7 litres).
TO ENSURE KETTLE IS NOT
OVERFILLED, ALWAYS CHECK
THE WATER LEVEL WITH THE
KETTLE POSITIONED ON ITS
POWER BASE.
7 Ensure the kettle is correctly
seated on the power base.
Switch the kettle on by
depressing the On/Off switch,
which will then illuminate
indicating that the kettle is
operating.
8 When the water reaches boiling
point, the kettle and the On/Off
light will automatically switch off.
9 You may also switch the kettle off
manually at any time by gently
pressing the top of the On/Off
switch downwards.
10 Always ensure the kettle is
switched off before removing
from or replacing on the base
unit.
WARNING: If this product is
filled above the max. level, hot
water may be ejected.

5
CLEANING
1 Always unplug from the plug
socket and allow to cool fully
before cleaning.
2 Clean the exterior surface of the
kettle with a damp cloth and then
polish with a soft dry cloth. Do
not use steel wool pads or
abrasive cleaners.
3Do not immerse the kettle,
power base or cordset and
plug in water or liquid of any
kind.
4 This kettle features a concealed
heating element which means it
never comes into contact with
the water inside the kettle. This
hygienic design not only makes
cleaning the inside of the kettle
much easier, it also keeps
cleaning to a minimum.
5 The filter inside the kettle needs
to be cleaned periodically, how
often will vary according to where
you live and how often you use
your kettle. You should clean it
whenever there are any
noticeable deposits left on the
filter and especially if the rate of
pouring starts to reduce.
6 Although the kettle is designed
for the element to remain scale
free, in hard water areas, scale
may still build up on the base.
Descale regularly using a
proprietary descaler.