BREWISTA Stout Spout BSS12STKA User manual

Cafetto™ Descaler
1.2 Liter Stout Spout™
Stovetop Kettle
Lid with
Temperature Gauge
• What’sinthebox?
QUICK START GUIDE
StartHere
Scan for
Instructional video
• Layout
• Features
WASHER
SAFE
WASHER
SAFE
WASHER
SAFE
Brushed
stainless
steel nish
Easy grip
handle for
excellent
pour control
Temperature gauge
built into the lid
• Durable 300 Series food grade stainless steel
• Generous 1.2 liter capacity
• Temperature gauge in lid
• Temperature displayed in Fahrenheit and Celsius
• Innovative spout design provides accurate
pouring without compromising speed
• Ergonomically balanced easy-grip handle
• For stovetop / induction use
• Dishwasher safe (kettle body)
• BPA free
Stout Spout™ Stovetop Kettle
with temperature gauge
BSS12STKA
1) Spout
2) Lid
3) Temperature Gauge
4) Vent Holes
5) Thermometer
6) Kettle Opening
7) Handle
8) Maximum water level indicator
9) Minimum water level indicator
1
5
4
6
2
7
3
8
9
• FirstTimeUse
• Remove the lid.
• Fill the kettle to the Max ll line (1.2 L) with cold water.
IMPORTANT!Donotfillabovethe“max”llline(1.2L).
• Place lid onto the kettle with vent holes facing away from
the handle.
• Place kettle on lit stovetop or induction heater
• Bring water to a boil, then empty the kettle.
• Allow the appliance to cool down for 1 minute.
• Repeat twice before initial use.

1133 W. 27th Street, Cheyenne, WY 82001, USA | www.mybrewista.com
Toll Free in North America: 888-538-8683 | Local: 307-222-6086
• WashingInstructions
• Hand wash with mild soapy water.
• Dry the exterior of the kettle with a soft cloth or leave to dry on a
dish rack.
-OR-
• Turn kettle upside down and wash in a dishwasher.
• Note: Do not wash the lid and temperature gauge in the dishwasher.
- Hand wash the lid and temperature gauge with mild soapy
water.
- Dry the exterior of the lid and temperature gauge with a soft
cloth or leave to dry on a dish rack.
• Take the lid o of the kettle.
• Use a pair of needle-nosed pliers or similar tool to adjust the
three tabs of the kettle lid. If you push in the tab, the lid tension
will be reduced and easier to put on and take o. If you pull out
the tabs the lid will be harder to pull o.
• After adjusting the tabs, replace the lid and remove it again to
see if the adjustment is correct.
• Repeat the above steps until you have adjusted the lid to your
preference.
• When mineral scale builds up in the kettle, it can aect tempera-
ture consistency and slow down heating time.
• To ensure optimum performance, Brewista recommends
descaling the kettle when mineral build-up is visible inside the
kettle.
Note: Vinegar may not eectively descale the kettle and can be
dicult to thoroughly rinse.Vinegar may also leave behind an odor
that could aect future use.
Brewista recommends using Cafetto™ Descaler.
HowtouseCafetto™Descaler:
• Mix 1 packet Cafetto™ Descaler with 40 oz.
of lukewarm water.
• Pour the solution into the kettle.
• Bring the solution to a boil.
• Let the vessel cool for 15 minutes, then
discard the solution.
• Rinse thoroughly with fresh water.
• ChangingtheTemperatureGauge
• AdjustingKettleLidTension
• Unscrew the outer rim that secures the temperature gauge
in place.
• Pull out the temperature gauge.
• Replace with a new temperature gauge and re-assemble
the lid.
• Remove the lid.
• Fill the kettle to or below the Max ll line (1.2 L) with cold water.
• Place lid onto the kettle with vent holes facing away from
the handle.
• Place kettle on lit stovetop or induction heater.
• Bring water to the desired temperature as displayed on the
temperature gauge.
• Descaling
Stout Spout™ Stovetop Kettle
with temperature gauge
WASHER
SAFE
BSS12STKA
• UsingtheKettle
1
2