• Washing Instructions
• Remove the kettle from the base.
• Clean the outside of the base and the kettle with a damp, soft cloth
or sponge. A bottle brush may be used to clean the interior of
the kettle.
• Clean the inside of the kettle with dish detergent and rinse
thoroughly with water.
• Do not use abrasive cleaners.
• After cleaning, dry the kettle and the base thoroughly.
WARNING: Never immerse the kettle or the base in water or
other liquids.
• Remove the kettle from the base.
• The LCD will display “00:00”.
• Press the TIMER button to start the count-up timer.
• The maximum count-up time is 59’59”.
• Press the TIMER button while timer is counting to stop the timer.
• Press theTIMER button a second time to return the timer to zero.
• When the kettle is removed from the base and then returned,
the LCD will display current water temperature.
• When mineral scale builds up in the kettle, it can aect
temperature consistency and slow down heating time.
• To ensure optimum performance, Brewista recommends
descaling the kettle when mineral build-up is visible inside
the kettle.
Note: Vinegar may not eectively descale the kettle and can be
dicult to thoroughly rinse. Vinegar may also leave behind an
odor that could aect future use.
Brewista recommends using Cafetto™ Descaler.
How to use Cafetto™ Descaler:
• Mix 1/2 packet Cafetto™ Descaler with
20 oz (600 ml) of lukewarm water.
• Pour the solution into the kettle.
• Bring the solution to a boil.
• Let the vessel cool for 15 minutes, then
discard the solution.
• Rinse thoroughly with fresh water.
• Keep Warm Function • Count-Up Timer Feature
• Press the KEEP WARM button.
The Keep Warm Indicator Light
will illuminate.
• The set temperature will be
maintained for one hour.
• If the kettle is removed from the
base, the Keep Warm feature will
deactivate.
• To resume the Keep Warm feature,
return kettle to base and press the
KEEP WARM button.
• If the Keep Warm feature is not
active, the kettle will reach the set
temperature and shut o.
• Descaling
• To stop the heating process, press the ON/OFF button or
remove the kettle from the base.
• To resume heating, return kettle to base and press the ON/OFF
button.
• When the set temperature is reached, two audible beeps are
emitted.
WARNING: Never set the temperature above the boiling point.
Refer to the “High Altitude Users” section in the owner’s manual
to determine the boiling temperature for your altitude.
• Setting the Temperature
(Continued)
(Refer to owner’s manual for detailed temperature setting
instructions.)
• Fast Boil Function
• Press the FAST BOIL button
one time.
• The button’s backlight will
ash and the heater will turn
on immediately to boil the
water.
• Press the FAST BOIL button
again to cancel the function.