BREWISTA Stout Spout BSS12ESKA Series User manual

Cafetto™ Descaler
1.2 Liter Stout Spout™
Electric Switch Kettle
Lid with
Temperature
Gauge
Base
Removable Power Cord
(in markets outside of
North America)
• What’sinthebox?
• SettingUptheKettle • FirstTimeUse
QUICK START GUIDE
StartHere
Scan for
Instructional video
• Set the base on a flat, steady surface and plug cord into a
grounded wall outlet. (If your kettle has a removable power cord,
attach the female end of the power cord to the base first.)
• Lift o the kettle’s lid and ll kettle with cold water.
IMPORTANT!Donotfillabovethe“max”llline(1.2L).
• Replace lid with vent holes facing away from the handle.
• Return kettle to the base.
1) Spout
2) Temperature Gauge
3) Lid
4) Thermometer
5) Handle
6) Min & Max water
level indicators
7) On/O Switch with
Indicator Light
8) Base
9) Power cord with plug
(Removable power cord in markets
outside of North America)
• Layout
• Features
• Fill the kettle to the Max ll line (1.2 L) with cold water.
• Replace lid with vent holes facing away from the handle.
• Place kettle on base.
• Press the ON/OFF switch down.
• Bring water to a boil, then empty the kettle.
• Allow the appliance to cool down for 1 minute.
• Repeat twice before initial use.
AUTO
OFF
AUTO
OFF
AUTO
OFF
Brushed
stainless
steel nish
Easy grip
handle for
excellent
pour
control
Temperature gauge
built into the lid
• Durable 300 Series food grade stainless steel
• Generous 1.2 liter capacity
• Analog temperature gauge in lid
• Temperature displayed in Fahrenheit and Celsius
• Innovative spout design provides accurate
pouring without compromising speed
• Ergonomically balanced easy-grip handle
• Auto-o function
• BPA free
• Lift o base; no cord to interfere with pouring
• Detachable power cord
(in markets outside of North America)
Stout Spout™ Electric Switch Kettle
with temperature gauge
BSS12ESKA Series
1
5
4
6
2
7
3
8
9

1133 W. 27th Street, Cheyenne, WY 82001, USA | www.mybrewista.com
Toll Free in North America: 888-538-8683 | Local: 307-222-6086
• WashingInstructions
• Remove the kettle from the base.
• Cleantheoutsideofthebaseandthekettlewithadamp,softcloth
or sponge. A bottle brush may be used to clean the interior of
the kettle.
• Clean the inside of the kettle with dish detergent and rinse
thoroughly with water.
• Do not use abrasive cleaners.
• After cleaning, dry the kettle and the base thoroughly.
WARNING: Never immerse the kettle or the base in water or
other liquids.
• Take the lid o of the kettle.
• Use a pair of needle-nosed pliers or similar tool to adjust the
three tabs of the kettle lid. If you push in the tab, the lid tension
will be reduced and easier to put on and take o. If you pull out
the tabs the lid will be harder to pull o.
• After adjusting the tabs, replace the lid and remove it again to
see if the adjustment is correct.
• Repeat the above steps until you have adjusted the lid to your
preference.
• When mineral scale builds up in the kettle, it can aect tempera-
ture consistency and slow down heating time.
• To ensure optimum performance, Brewista recommends
descaling the kettle when mineral build-up is visible inside the
kettle.
Note: Vinegar may not eectively descale the kettle and can be
dicult to thoroughly rinse.Vinegar may also leave behind an odor
that could aect future use.
Brewista recommends using Cafetto™ Descaler.
HowtouseCafetto™Descaler:
• Mix 1 packet Cafetto™ Descaler with 40 oz.
of lukewarm water.
• Pour the solution into the kettle.
• Bring the solution to a boil.
• Let the vessel cool for 15 minutes, then
discard the solution.
• Rinse thoroughly with fresh water.
• ChangingtheTemperatureGauge
• AdjustingKettleLidTension
• Unscrew the outer rim that secures the temperature gauge
in place.
• Pull out the temperature gauge.
• Replace with a new temperature gauge and re-assemble
the lid.
• UsingtheKettle•
• Remove the lid.
• FillthekettleabovetheMinlllineandbelowtheMaxllline
(1.2 L) with cold water.
• Replace lid with vent holes facing away from the handle.
• Placekettleonbase.
• PresstheOn/Oswitchdown.
• Bring water to the desired temperature as displayed on the
temperature gauge.
• Descaling
Stout Spout™ Electric Switch Kettle
with temperature gauge
BSS12ESKA Series
1
2