4
How to use
A. power on and paring
long push MFB button till headset have “power on” and “paring” notice,BH-06 will
waiting for paring with voice device. Then the red/blue LED will become blink alternately.
B. Pairing the BH-06 with Bluetooth devices
Be sure BH-06 in paring mode first. Press and hold the MFB for 3 seconds, till Red and blue
Led blink alternately, or you hear the indication “Do Do” twice come out. And then release
the MFB. The unit will become pairing mode.
B) Pairing the BH-06 with Bluetooth device (mobile phone, pad, notebook...)
Please make sure your Bluetooth device has Bluetooth function that can be used.
Specific pairing procedures were not the same with different Bluetooth device. Please refer
to your Bluetooth device manual for further information.
Steps as follows:
a) Please keep the BH-06 and Bluetooth device in the range of 1 meter when pairing.
b) Start the Bluetooth device and search the Bluetooth devices.
c) Wait the BH-06 enter into pairing mode (Please refer to “how to enter into pairing
mode”).
After got the BH-06 on the list, select “BH-06”in the Bluetooth device list.
a) Almost all Bluetooth device no need enter pass word but some version Bluetooth
device maybe need it, if need it ,the password is”0000”, and press the key of” Yes” or
“confirmed”.
b) After successful pairing, select “BH-06” in the Bluetooth device list, and press
“connect”.
c) After successful connecting, the blue LED of the BH-06 will quickly blinks twice or
three times every 4 seconds.
