Brightlux Aml14-ww-16.5ft User manual

PREPARING TO EXTEND THE

NEON FLEX LIGHTS

CONNECTING THE

NEON FLEX LIGHTS

MOUNTING THE

NEON FLEX LIGHTS

Ensure all neon flex lights are unplugged

before adding the additional neon flex

light (A) to the series.

Connect the last neon flex light in the

series and the extension neon flex.

light (A) together and ensure the

connectors are tightly secured.

Attach the end cap (1) to the last neon flex

light in the series and ensure the

connection is secure.

Remove the end cap (1) from the last

neon flex light in the series by turning

clockwise.

Remove the power cord (2) from

additional extension neon flex lights (A).

Extend up to 108ft. (32.9m) maximum.

Use only the following BrightLux neon flex

light extension segments:

9000-0004 or 9000-0005.

Make sure the distance between two

lines of neon flex light is at

least 1/2in. (12 mm).

Mounting clips should be evenly spaced

and be a maximum of 3ft. (0.91 m) apart.

Insert the screw (D) through the

opening in the mounting clip (C).

Screw the mounting clip (C) into

position at the installation location.

Place the neon flex light (A) securely

into the mounting clip (C).

WARNING: Do not install the neon flex light

within 16 ft. (4.87 m) of pool or spa. Do not

install neon flex lighting in cabinets, tanks, or

enclosures of any kind.

WARNING: This product has a polarized plug (one blade is

wider than the other) as a feature to reduce the risk of electrick

shock. This plug will fit in a polarized outlet only one way. If the

plug does not fit fully in the outlet, reverse the plug. If it still

does not fit, contact a qualified electrician. Never use with an

extension cord unless the plug can be fully inserted.

Do not alter the plug.

WARNING: When using this product outdoors,

basic safety precautions should always be

followed to reduce the risk of fire, electric

shock, and personal injury.

WARNING: Do not cover this product as the

covering may cause the flexible light to

overheat and either melt or ignite.

WARNING: Do not puncture, cut, shorten, or

splice the flexible lighting.

WARNING: Do not use if there is any

damage to the light or cord insulation.

Inspect periodically.

CAUTION: All units must be unplugged before

you add additional segments. Only use

segments recommended by the manufacturer

of this lighting system.

CAUTION: Ensure all connections and the end

cap on the last segment are tightly secured to

prevent the entry of water.

WARNING: Secure the flex lights using only

the mounting clips provided. Do not secure

this product with staples, nails, or similar

objects that may damage the insulation.

WARNING: Do not submerge the flexible light

in liquids or use the product in the vicinity of

standing water or other liquids.

WARNING: Do not mount or secure the flex

light in a manner than can cut the outer jacket

or damage the cord insulation. Inspect the

flex light carefully before use and discard any

flex lights that have a broken outer jacket,

loose connections, or frayed wire insulation.

PAGE1

Please contact us at 1-844-255-9692 for further assistance.

Brightlux is a trademark of American Ligthing, Inc.

16.5ft. High-Voltage 360°Neon Flex

Use and Care Guide

Item # 9000-0004 & 9000-0005

Model # AML14-WW-16.5FT &

AML14-CW-16.5FT

C - Mounting

Clip x 10

A - 16.5ft. 360°

Neon Flex x1

B - 5ft. Power Cord x1 D - Screw x 10

IN S TA LL ATI O N

TOOLS REQUIRED HARDWARE INCLUDED

Phillips Screwdriver

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

Ground Fault Circuit Interrupter (GFCI) protection should be provided in the circuits

or outlet to be used for outdoor use. Receptacles are available that have built-in GFCI

protection.

Only use outdoor extension cords such as type SW, SOW, STW, STOW, SJW, SJOW, SJTW,

or SJTOW. This designation is marked on the wire of the extension cord.

The rated voltage for this product is 120VAC, 60Hz, 32W, 0.25A.

Do not operate this product with the flexible light tightly coiled.

Do not route the cord or flexible light cable through walls, doors, windows, or any

similar part of a building structure.

Do not subject flexible lighting to continous flexing.

Do not exceed the maximum extension length in feet permitted by the marking. The

maximum extension length for this neon flex light is 108ft. (32.9m).

SAFETY INFORMATION

PAGE2

Please contact us at 1-844-255-9692 for further assistance.

Brightlux is a trademark of American Ligthing, Inc.

SAVE THESE INSTRUCTIONS FOR FUTURE USE

Questions, problems, missing parts? Before returning to the store,

call out Customer Service Team

8 a.m. - 5 p.m., MST, Monday - Friday

1-844-255-9692

WARRANTY

The manufacturer warrants this product to be free for two (2) years against any defects that are due to faulty materials or workmanship. This warranty applies only to the original

customer purchaser and only to products used in normal use and service. If this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is

the repair or replacement of the product at the manufacturer’s discretion. provided that the product has not been damaged through misuse, abuse, accident, modifications,

alterations, neglect, or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set up, or used in any way not following the

instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, or faulty installation,

or any other failure not relating to faulty workmanship. This warranty shall not apply to finish on any portion of the product, such as surface and/or weathering, as this is considered

normal wear and tear. The manufacturer does not warrant and specifically disclaim any warranty, whether expressed or implied or fitness for a particular purpose, other than the

warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including any labor/expense

costs involved in the replacement or repair of said product.

Contact Customer Service Team at 1-844-255-9692

WARNING: Risk of fire. The plug on the main

neon flex light contains an electrical fuse as a safety

feature. Do not remove or replace this plug. Do not

use the light if the plug is damaged.

Disconnect the power before replacing the fuse.