Brizo BELO 63052LF User manual

77522 Rev. F
PULL-DOWN KITCHEN
AND BAR / PREP FAUCETS
T
E
F
L
O
N
Write purchased model number here.
BELO
®
Models
63052LF & 63952LF
1
For easy installation of your Brizo®
faucet you will need:
• To READ ALL the instructions
completely before beginning.
• To READ ALL warnings, care, and
maintenance information.
You may need the following tools:
WARNING: THIS FAUCET IS NOT TO BE USED WITH PORTABLE DISHWASHERS!
T
E
F
L
O
N
03/05/2018
1/8"

77522 Rev. F 2
TABLE OF CONTENTS:
Warranty ------------------------------------------------------------- Page 2
Installation Instructions ----------------------------------------------- Pages 3-13
Plastic Sleeve Installation --------------------------------------------- Page 11
Setting The Handle Limit Stop ----------------------------------------- Page 14
Maintenance -------------------------------------------------------- Page 15
Replacement Parts -------------------------------------------------- Pages 16 & 17
Parts and Finish
All parts (other than electronic parts and batteries) and finishes of this Brizo®faucet are warranted to the original consumer purchaser to be
free from defects in material and workmanship for as long as the original consumer purchaser owns the home in which the faucet was first
installed or, for commercial users, for 5 years from the date of purchase.
Electronic Parts and Batteries (if applicable)
Electronic parts (other than batteries), if any, of this Brizo®faucet are warranted to the original consumer purchaser to be free from defects in
material and workmanship for 5 years from the date of purchase or, for commercial users, for one year from the date of purchase. No warranty
is provided on batteries.
Brizo Kitchen & Bath Company will replace, FREE OF CHARGE, during the applicable warranty period, any part or finish that proves defec-
tive in material and/or workmanship under normal installation, use and service. If repair or replacement is not practical, Brizo Kitchen & Bath
Company may elect to refund the purchase price in exchange for the return of the product. These are your exclusive remedies.
Brizo Kitchen & Bath Company recommends using a professional plumber for all installation and repair. We also recommend that you use only
genuine Brizo®replacement parts.
Brizo Kitchen & Bath Company shall not be liable for any damage to the faucet resulting from misuse, abuse, neglect or improper or incorrectly
performed installation, maintenance or repair, including failure to follow the applicable care and cleaning instructions.
Replacement parts may be obtained by calling the applicable number below or by writing to:
In the United States and Mexico: In Canada:
Brizo Kitchen & Bath Company Masco Canada Limited, Plumbing Group
Product Service Technical Service Centre
55 E. 111th Street 350 South Edgeware Road
Indianapolis, IN 46280 St. Thomas, Ontario, Canada N5P 4L1
1-877-345-BRIZO (2749) 1-877-345-BRIZO (2749)
[email protected] [email protected]
Proof of purchase (original sales receipt) from the original purchaser must be made available to Brizo Kitchen & Bath Company for all warranty
claims unless the purchaser has registered the product with Brizo Kitchen & Bath Company. This warranty applies only to Brizo®faucets manu-
factured after January 1, 1995 and installed in the United States of America, Canada and Mexico.
BRIZO KITCHEN & BATH COMPANY SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
(INCLUDING LABOR CHARGES) FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THE FAUCET. Some states/provinces do
not allow the exclusion or limitation of special, incidental or consequential damages, so these limitations and exclusions may not apply to you.
This warranty gives you special legal rights. You may also have other rights which vary from state/province to state/province.
This is Brizo Kitchen & Bath Company’s exclusive written warranty and the warranty is not transferable.
If you have any questions or concerns regarding our warranty, please view our Warranty FAQs at www.Brizo.com, email us at [email protected]
or call us at the applicable number above.
Limited Warranty on Brizo®Faucets
© 2017 Masco Corporation of Indiana

77522 Rev. F
A. C.
A. Thread hose (1) into spray wand (2). C. Insert hose (1) into and through spout
sub-assembly (2).
3
1
2
1
Hose Installation
1
2
B.
B. To allow for easier assembly, bend
hose near wand as shown.
Bend

77522 Rev. F
A.
A. Verify friction washer (1), spout clip (2) and spout ring (3) are present on
spout assembly.
4
2
Spout Assembly
1
3
2

77522 Rev. F
B. C.
B. Insert hose (1) through guide in hub
and out through mounting shank
(2).
C. Align button (1) on spout clip with hole
in hub (2), then insert spout into hub.
Use back-and-forth motion to insert
spout assembly into hub until clip
button slips into hole. Rotate spout
assembly to ensure smooth
operation. USE CAUTION NOT TO
PINCH FINGERS.
5
Spout Assembly (Continuation)
1
2
1
2