Broan Best K41 Series User manual

SPECIFICATION SHEET
BEST BY BROAN P.O. BOX 140 HARTFORD, WISCONSIN 53027
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
K41 SERIES
RANGE HOODS
Class pyramidal lines create a statement of simple
elegance.
FEATURES
•Italian design
•Wall mount
•Finishes: 304 Stainless Steel #4 Brushed, White, Black,
Polished Brass, Brushed Copper
•Widths: 30”, 36”
•Telescopic flue accommodates 8’ to 9’ ceilings
•6” round duct connector/backdraft damper
•Convertible to non-ducted operation (for 8’ to 9’ ceilings
only - requires Model No. REKITK41 sold separately)
•Halogen lighting (2 x 20 watt, MR16 - bulbs included)
•Slide controls: on-off, infinite speed
•Single centrifugal blower
•Dishwasher-safe filter features a quick-release latch and
decorative cover plate
•Heat SentryTM - automatically turns blower to high speed
when excess cooking heat is detected
OPTIONS
•Backsplash available (Model BSK1)
•Accent trim in contrasting or complementary finishes
(Model No. FTK41)
•Flue extension for 10’ ceiling (ducted only) (Model No.
FEXTK42) (31-7/8” long)
•Recirculating filter (Model No. ROUND FILTER)
•Replacement grease filters available
•Replacement bulb (Part No. SB02300668)
HVI-2100 CERTIFIED RATINGS comply with new
testing technologies and procedures prescribed by
the Home Ventilating Institute, for off-the-shelf
products, as they are available to consumers. Product
performance is rated at 0.1 in. static pressure, based
on tests conducted in AMCA’s state-of-the-art test
laboratory. Sones are a measure of humanly-perceived
loudness, based on laboratory measurements.
50J 99042839C
SPECIFICATIONS
VOLTS AMPS CFM SONES DUCT
120 3.13 500 8.0 6” round
min 33"
max 47"
Mount range hood so bottom of hood is
24” minimum above cooking surface.

BEST BY BROAN P.O. BOX 140 HARTFORD, WISCONSIN 53027
K41 SERIES WIRING
K41 SERIES MOUNTING
4-1/4”
Wiring Box
Air Outlet Ø 5-7/8”
NOTE: Minimum hood distance above cooktop must not be less than 24”.
A maximum of 30” above the cooktop is highly recommended for best capture of cooking impurities.
Distances over 30” are at the installer and users’ discretion; and if ceiling height and flue length permit.
MOUNTING BRACKET
LOCATION
(ABOVE 36” HIGH
COOKTOP)
CEILING DUCT
MOUNTING DISTANCE ABOVE 36” HIGH COOKTOP (SEE NOTE BELOW)
HEIGHT METHOD 24” 25” 26” 27” 28” 29” 30”
MOUNTING BRACKET LOCATION ABOVE 36” HIGH COOK TOP
8 FEET DUCTED OR 36-3/16” 37-3/16” 38-3/16” 39-3/16”
NONDUCTED
with REKITK41
9 FEET DUCTED 37-3/16” 38-3/16” 39-3/16” 40-3/16” 41-3/16” 42-3/16”
NONDUCTED 41-3/16” 42-3/16”
with REKITK41
10 FEET DUCTED WITH 38-3/16” 39-3/16” 40-3/16” 41-3/16” 42-3/16”
FEXTK42
L
L
C
3 "
3
4
3 "
3
4
2 "
3
16
FRAMING BEHIND WOOD
CROSS SUPPORT
WOOD CROSS
SUPPORT – SECURED
TO FRAMING AND
LOCATED BEHIND
DRYWALL
DRYWALL
STUD
STUD