Broan Rangemaster 613004 User manual

SPECIFICATION SHEET
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 (1-800-637-1453)
NuTone, Inc., 4820 Red Bank Road, Cincinnati, OH 45227 (1-800-543-8687)
Broan-NuTone Canada, Inc., 1140 Tristar Drive, Mississauga, Ontario, L5T 1H9 (1-888-882-7626)
9-3/8"
min 33"
max 48"
30", 35-7/16"
6-5/8"
9-1/4"
2-1/2"
22-1/2"
18"
40F 99043361B
613004 / 619004
RANGE HOOD
An enduring stainless steel design that combines
the flawless look of Italian style with a lasting
impression.
FEATURES
•Italian design
•Wall mount
•Finish: 430 Stainless Steel #4 Brushed
•Widths: 30”, 35-7/16” (90cm)
•Telescopic ue accommodates 8’ to 9’ ceilings
•Convertible to ducted or non-ducted operation
•6” round duct connector/backdraft damper
•Halogen lighting (2 x 20 watt, Type JC 12V 20W G4 base,
bulbs included)
•Concealed three-speed slide control
•450 CFM centrifugal blower
•Dishwasher-safe lters feature a quick-release latch and
polished stainless steel cover plate
•Heat SentryTM - automatically turns blower to high speed
when excess cooking heat is detected
OPTIONS
•Replacement grease lters available
•Non-ducted lter kit (contains two 6” round lters) (Model
ROUNDFILTER)
•Flue extension for 10’ ceiling (Model RFX6104) (Ducted
only – 31-7/8” long)
•Exterior blower version available in 35-7/16” (90cm) and 48”
widths, providing 600, 900, 1200, or 1500 CFM exhaust
•48” wide integral blower version (614804) available,
providing 900 CFM exhaust
SPECIFICATIONS
HVI-2100 CERTIFIED RATINGS comply with new
testing technologies and procedures prescribed
by the Home Ventilating Institute, for off-the-shelf
products, as they are available to consumers. Product
performance is rated at 0.1 in. static pressure,
based on tests conducted in AMCA’s state-of-
the-art test laboratory. Sones are a measure of
humanly-perceived loudness, based on laboratory
measurements.
vOLTS AMPS CFM SONES DUCT
120 3.13 450 9.0 6” round

L
L
C
11 "
13
16 2 "
3
16
613004 / 619004 MOUNTING
WOOD CROSS SUPPORT
– SECURED TO FRAMING AND
LOCATED BEHIND DRYWALL
613004 / 619004 WIRING
120 vOLT 60 HZ
2-WIRE PLUS
GROUND POWER
SUPPLY
FRAMING BEHIND WOOD
CROSS SUPPORT
Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 (1-800-637-1453)
NuTone, Inc., 4820 Red Bank Road, Cincinnati, OH 45227 (1-800-543-8687)
Broan-NuTone Canada, Inc., 1140 Tristar Drive, Mississauga, Ontario, L5T 1H9 (1-888-882-7626)
DRYWALL
NOTE: Minimum hood distance above
cooktop must not be less than 24”.
A maximum of 30” above the cooktop is
highly recommended for best capture of
cooking impurities.
Distances over 30” above the cooktop
are at the installer’s and user’s discre-
tion - providing that ceiling height and
flue length permit.
MOUNTING BRACKET
LOCATION
(ABOvE 36” HIGH
COOKTOP)
CEILING DUCT HOOD DISTANCE ABOVE 36” HIGH COOKTOP (SEE NOTE AT RIGHT)
HEIGHT METHOD 24” 25” 26” 27” 28” 29” 30”
MOUNTING BRACKET LOCATION ABOVE 36” HIGH COOK TOP
8 FEET DUCTED OR 27” 28” 29” 30”
NONDUCTED
9 FEET DUCTED 30” 31” 32” 33”
NONDUCTED 27” 28” 29” 30” 31” 32” 33”
10 FEET DUCTED WITH 30” 31” 32” 33”
RFX6104 FLUE
EXTENSION