Brocade Communications Systems 5600 vRouter User manual

Supporting Brocade 5600 vRouter 5.0R1
CONFIGURATION GUIDE
Brocade 5600 vRouter
OSPFv3 Configuration Guide, 5.0R1
53-1004503-01
15 August 2016

© 2016, Brocade Communications Systems, Inc. All Rights Reserved.
Brocade, Brocade Assurance, the B-wing symbol, ClearLink, DCX, Fabric OS, HyperEdge, ICX, MLX, MyBrocade, OpenScript, VCS, VDX, Vplane, and
Vyatta are registered trademarks, and Fabric Vision is a trademark of Brocade Communications Systems, Inc., in the United States and/or in other
countries. Other brands, products, or service names mentioned may be trademarks of others.
Notice: This document is for informational purposes only and does not set forth any warranty, expressed or implied, concerning any equipment,
equipment feature, or service offered or to be offered by Brocade. Brocade reserves the right to make changes to this document at any time, without
notice, and assumes no responsibility for its use. This informational document describes features that may not be currently available. Contact a Brocade
sales office for information on feature and product availability. Export of technical data contained in this document may require an export license from the
United States government.
The authors and Brocade Communications Systems, Inc. assume no liability or responsibility to any person or entity with respect to the accuracy of this
document or any loss, cost, liability, or damages arising from the information contained herein or the computer programs that accompany it.
The product described by this document may contain open source software covered by the GNU General Public License or other open source license
agreements. To find out which open source software is included in Brocade products, view the licensing terms applicable to the open source software, and
obtain a copy of the programming source code, please visit http://www.brocade.com/support/oscd.
Brocade 5600 vRouter OSPFv3 Configuration Guide, 5.0R1
2 53-1004503-01

Contents
Preface...........................................................................................................................................................................................................................................................................................7
Document conventions..............................................................................................................................................................................................................................................7
Text formatting conventions..........................................................................................................................................................................................................................7
Command syntax conventions....................................................................................................................................................................................................................7
Notes, cautions, and warnings.....................................................................................................................................................................................................................8
Brocade resources.......................................................................................................................................................................................................................................................8
Contacting Brocade Technical Support........................................................................................................................................................................................................... 8
Brocade customers...........................................................................................................................................................................................................................................8
Brocade OEM customers..............................................................................................................................................................................................................................9
Document feedback....................................................................................................................................................................................................................................................9
About This Guide.....................................................................................................................................................................................................................................................................11
OSPFv3 Configuration...................................................................................................................................................................................................................................................... 13
OSPFv3 overview.......................................................................................................................................................................................................................................................13
Support for OSPFv3 address families............................................................................................................................................................................................................14
Supported standard....................................................................................................................................................................................................................................................14
Configuring OSPFv3................................................................................................................................................................................................................................................ 14
Basic OSPFv3 configuration......................................................................................................................................................................................................................15
Verifying the OSPFv3 configuration......................................................................................................................................................................................................18
OSPFv3 Commands..........................................................................................................................................................................................................................................................21
monitor protocol ospfv3 background............................................................................................................................................................................................................23
monitor protocol ospfv3 disable events.......................................................................................................................................................................................................24
monitor protocol ospfv3 disable ifsm............................................................................................................................................................................................................25
monitor protocol ospfv3 disable lsa............................................................................................................................................................................................................... 26
monitor protocol ospfv3 disable nfsm...........................................................................................................................................................................................................27
monitor protocol ospfv3 disable nsm........................................................................................................................................................................................................... 28
monitor protocol ospfv3 disable packet dd................................................................................................................................................................................................29
monitor protocol ospfv3 disable packet detail.........................................................................................................................................................................................30
monitor protocol ospfv3 disable packet hello.............................................................................................................................................................................................31
monitor protocol ospfv3 disable packet ls-ack........................................................................................................................................................................................32
monitor protocol ospfv3 disable packet ls-request...............................................................................................................................................................................33
monitor protocol ospfv3 disable packet ls-update................................................................................................................................................................................34
monitor protocol ospfv3 disable packet recv............................................................................................................................................................................................35
monitor protocol ospfv3 disable packet send.......................................................................................................................................................................................... 36
monitor protocol ospfv3 disable route.......................................................................................................................................................................................................... 37
monitor protocol ospfv3 enable events........................................................................................................................................................................................................38
monitor protocol ospfv3 enable ifsm.............................................................................................................................................................................................................39
monitor protocol ospfv3 enable lsa................................................................................................................................................................................................................40
monitor protocol ospfv3 enable nfsm.............................................................................................................................................................................................................41
monitor protocol ospfv3 enable nsm.............................................................................................................................................................................................................42
monitor protocol ospfv3 enable packet dd................................................................................................................................................................................................ 43
monitor protocol ospfv3 enable packet detail...........................................................................................................................................................................................44
monitor protocol ospfv3 enable packet hello............................................................................................................................................................................................45
monitor protocol ospfv3 enable packet ls-ack.........................................................................................................................................................................................46
monitor protocol ospfv3 enable packet ls-request................................................................................................................................................................................ 47
monitor protocol ospfv3 enable packet ls-update.................................................................................................................................................................................48
Brocade 5600 vRouter OSPFv3 Configuration Guide, 5.0R1
53-1004503-01 3

monitor protocol ospfv3 enable packet recv.............................................................................................................................................................................................49
monitor protocol ospfv3 enable packet send...........................................................................................................................................................................................50
monitor protocol ospfv3 enable route.............................................................................................................................................................................................................51
protocols ospfv3 abr-type....................................................................................................................................................................................................................................52
protocols ospfv3 auto-cost reference-bandwidth <bandwidth>.................................................................................................................................................... 53
protocols ospfv3 default-information originate....................................................................................................................................................................................... 54
protocols ospfv3 default-metric <metric>................................................................................................................................................................................................... 56
protocols ospfv3 distance.....................................................................................................................................................................................................................................57
protocols ospfv3 distribute-list <name>.......................................................................................................................................................................................................59
protocols ospfv3 log............................................................................................................................................................................................................................................... 60
protocols ospfv3 log events................................................................................................................................................................................................................................62
protocols ospfv3 log ifsm.....................................................................................................................................................................................................................................64
protocols ospfv3 log lsa........................................................................................................................................................................................................................................ 65
protocols ospfv3 log nfsm....................................................................................................................................................................................................................................67
protocols ospfv3 log nsm.....................................................................................................................................................................................................................................68
protocols ospfv3 log packet................................................................................................................................................................................................................................69
protocols ospfv3 log rib........................................................................................................................................................................................................................................... 71
protocols ospfv3 log route....................................................................................................................................................................................................................................72
protocols ospfv3 passive-interface.................................................................................................................................................................................................................74
protocols ospfv3 passive-interface-exclude..............................................................................................................................................................................................75
protocols ospfv3 process <process-id> address-family ipv4 unicast......................................................................................................................................... 77
protocols ospfv3 process <process-id> address-family ipv4 unicast area <area-id> range..........................................................................................79
protocols ospfv3 process <process-id> address-family ipv4 unicast default-information originate.........................................................................81
protocols ospfv3 process <process-id> address-family ipv4 unicast redistribute..............................................................................................................83
protocols ospfv3 process <process-id> address-family ipv4 unicast redistribute bgp....................................................................................................85
protocols ospfv3 process <process-id> address-family ipv4 unicast redistribute connected......................................................................................87
protocols ospfv3 process <process-id> address-family ipv4 unicast redistribute kernel...............................................................................................89
protocols ospfv3 process <process-id> address-family ipv4 unicast redistribute rip.........................................................................................................91
protocols ospfv3 process <process-id> address-family ipv4 unicast redistribute static.................................................................................................93
protocols ospfv3 process <process-id> address-family ipv4 unicast summary-address..............................................................................................95
protocols ospfv3 process <process-id> passive-interface-exclude.............................................................................................................................................97
protocols ospfv3 redistribute bgp....................................................................................................................................................................................................................99
protocols ospfv3 redistribute connected..................................................................................................................................................................................................... 101
protocols ospfv3 redistribute kernel............................................................................................................................................................................................................. 103
protocols ospfv3 redistribute rip.....................................................................................................................................................................................................................105
protocols ospfv3 redistribute static................................................................................................................................................................................................................107
protocols ospfv3 router-id <router-id>........................................................................................................................................................................................................109
protocols ospfv3 summary-address <address> <action>.....................................................................................................................................................................111
show ipv6 ospfv3...................................................................................................................................................................................................................................................... 113
show ipv6 ospfv3 database.................................................................................................................................................................................................................................114
show ipv6 ospfv3 database adv-router........................................................................................................................................................................................................116
show ipv6 ospfv3 database external...............................................................................................................................................................................................................117
show ipv6 ospfv3 database inter-prefix.......................................................................................................................................................................................................118
show ipv6 ospfv3 database inter-router...................................................................................................................................................................................................... 119
show ipv6 ospfv3 database intra-prefix.....................................................................................................................................................................................................120
show ipv6 ospfv3 database link........................................................................................................................................................................................................................121
show ipv6 ospfv3 database max-age..........................................................................................................................................................................................................122
show ipv6 ospfv3 database network............................................................................................................................................................................................................123
show ipv6 ospfv3 database nssa-external................................................................................................................................................................................................124
show ipv6 ospfv3 database router.................................................................................................................................................................................................................125
Brocade 5600 vRouter OSPFv3 Configuration Guide, 5.0R1
4 53-1004503-01

show ipv6 ospfv3 database self-originate................................................................................................................................................................................................ 126
show ipv6 ospfv3 interface.................................................................................................................................................................................................................................127
show ipv6 ospfv3 neighbor............................................................................................................................................................................................................................... 128
show ipv6 ospfv3 route........................................................................................................................................................................................................................................129
show ip ospfv3 routing-instance ...................................................................................................................................................................................................................130
show ipv6 ospfv3 topology................................................................................................................................................................................................................................. 131
show ipv6 ospfv3 virtual-links..........................................................................................................................................................................................................................132
show ipv6 route ospfv3........................................................................................................................................................................................................................................133
show monitoring protocols ospfv3................................................................................................................................................................................................................134
OSPFv3 Area Commands...........................................................................................................................................................................................................................................135
protocols ospfv3 area <area-id>......................................................................................................................................................................................................................136
protocols ospfv3 area <area-id> nssa...........................................................................................................................................................................................................137
protocols ospfv3 area <area-id> nssa default-cost..............................................................................................................................................................................138
protocols ospfv3 area <area-id> nssa default-information-originate........................................................................................................................................ 139
protocols ospfv3 area <area-id> nssa default-information-originate metric.........................................................................................................................140
protocols ospfv3 area <area-id> nssa default-information-originate metric-type...............................................................................................................141
protocols ospfv3 area <area-id> nssa no-redistribution....................................................................................................................................................................142
protocols ospfv3 area <area-id> nssa no-summary............................................................................................................................................................................143
protocols ospfv3 area <area-id> nssa stability-interval......................................................................................................................................................................144
protocols ospfv3 area <area-id> nssa translator-role..........................................................................................................................................................................145
protocols ospfv3 area <area-id> range........................................................................................................................................................................................................146
protocols ospfv3 area <area-id> stub...........................................................................................................................................................................................................148
protocols ospfv3 area <area-id> virtual-link <router-id>....................................................................................................................................................................150
protocols ospfv3 area <area-id> virtual-link <router-id> dead-interval <interval>.................................................................................................................151
protocols ospfv3 area <area-id> virtual-link <router-id> hello-interval <interval>................................................................................................................153
protocols ospfv3 area <area-id> virtual-link <router-id> retransmit-interval <interval>....................................................................................................155
protocols ospfv3 area <area-id> virtual-link <router-id> transmit-delay <delay>.................................................................................................................157
OSPFv3 Interface Commands.................................................................................................................................................................................................................................. 159
interfaces <interface> ipv6 ospfv3................................................................................................................................................................................................................. 160
interfaces <interface> ipv6 ospfv3 cost <cost>......................................................................................................................................................................................... 161
interfaces <interface> ipv6 ospfv3 dead-interval <interval>.............................................................................................................................................................163
interfaces <interface> ipv6 ospfv3 hello-interval <interval>..............................................................................................................................................................165
interfaces <interface> ipv6 ospfv3 link-lsa-suppression enable................................................................................................................................................... 167
interfaces <interface> ipv6 ospfv3 mtu-ignore.......................................................................................................................................................................................168
interfaces <interface> ipv6 ospfv3 neighbor.............................................................................................................................................................................................170
interfaces <interface> ipv6 ospfv3 network <type>................................................................................................................................................................................. 171
interfaces <interface> ipv6 ospfv3 priority <priority>............................................................................................................................................................................173
interfaces <interface> ipv6 ospfv3 retransmit-interval <interval>.................................................................................................................................................. 175
interfaces <interface> ipv6 ospfv3 transmit-delay <delay>............................................................................................................................................................... 177
Supported Interface Types............................................................................................................................................................................................................................................ 179
VRF Support...........................................................................................................................................................................................................................................................................181
VRF support for OSPF and OSPFv3............................................................................................................................................................................................................181
OSPF configuration........................................................................................................................................................................................................................................181
OSPFv3 configuration..................................................................................................................................................................................................................................181
Command support for VRF routing instances..........................................................................................................................................................................................181
Adding a VRF routing instance to a Configuration mode command..............................................................................................................................182
Adding a VRF routing instance to an Operational mode command................................................................................................................................183
List of Acronyms................................................................................................................................................................................................................................................................ 185
Brocade 5600 vRouter OSPFv3 Configuration Guide, 5.0R1
53-1004503-01 5

Brocade 5600 vRouter OSPFv3 Configuration Guide, 5.0R1
6 53-1004503-01

Preface
∙Document conventions..................................................................................................................................................................................................... 7
∙Brocade resources...............................................................................................................................................................................................................8
∙Contacting Brocade Technical Support...................................................................................................................................................................8
∙Document feedback........................................................................................................................................................................................................... 9
Document conventions
The document conventions describe text formatting conventions, command syntax conventions, and important notice formats used in
Brocade technical documentation.
Text formatting conventions
Text formatting conventions such as boldface, italic, or Courier font may be used in the flow of the text to highlight specific words or
phrases.
Format Description
bold text Identifies command names
Identifies keywords and operands
Identifies the names of user-manipulated GUI elements
Identifies text to enter at the GUI
italic text Identifies emphasis
Identifies variables
Identifies document titles
Courier font Identifies CLI output
Identifies command syntax examples
Command syntax conventions
Bold and italic text identify command syntax components. Delimiters and operators define groupings of parameters and their logical
relationships.
Convention Description
bold text Identifies command names, keywords, and command options.
italic text Identifies a variable.
value In Fibre Channel products, a fixed value provided as input to a command option is printed in plain text, for
example, --show WWN.
[ ] Syntax components displayed within square brackets are optional.
Default responses to system prompts are enclosed in square brackets.
{ x | y | z } A choice of required parameters is enclosed in curly brackets separated by vertical bars. You must select
one of the options.
In Fibre Channel products, square brackets may be used instead for this purpose.
x | yA vertical bar separates mutually exclusive elements.
< > Nonprinting characters, for example, passwords, are enclosed in angle brackets.
Brocade 5600 vRouter OSPFv3 Configuration Guide, 5.0R1
53-1004503-01 7

Convention Description
... Repeat the previous element, for example, member [ member ...].
\ Indicates a “soft” line break in command examples. If a backslash separates two lines of a command
input, enter the entire command at the prompt without the backslash.
Notes, cautions, and warnings
Notes, cautions, and warning statements may be used in this document. They are listed in the order of increasing severity of potential
hazards.
NOTE
A Note provides a tip, guidance, or advice, emphasizes important information, or provides a reference to related information.
ATTENTION
An Attention statement indicates a stronger note, for example, to alert you when traffic might be interrupted or the device might
reboot.
CAUTION
A Caution statement alerts you to situations that can be potentially hazardous to you or cause damage to hardware, firmware,
software, or data.
DANGER
A Danger statement indicates conditions or situations that can be potentially lethal or extremely hazardous to you. Safety labels
are also attached directly to products to warn of these conditions or situations.
Brocade resources
Visit the Brocade website to locate related documentation for your product and additional Brocade resources.
You can download additional publications supporting your product at www.brocade.com. Select the Brocade Products tab to locate your
product, then click the Brocade product name or image to open the individual product page. The user manuals are available in the
resources module at the bottom of the page under the Documentation category.
To get up-to-the-minute information on Brocade products and resources, go to MyBrocade. You can register at no cost to obtain a user
ID and password.
Release notes are available on MyBrocade under Product Downloads.
White papers, online demonstrations, and data sheets are available through the Brocade website.
Contacting Brocade Technical Support
As a Brocade customer, you can contact Brocade Technical Support 24x7 online, by telephone, or by e-mail. Brocade OEM customers
contact their OEM/Solutions provider.
Brocade customers
For product support information and the latest information on contacting the Technical Assistance Center, go to http://
www.brocade.com/services-support/index.html.
If you have purchased Brocade product support directly from Brocade, use one of the following methods to contact the Brocade
Technical Assistance Center 24x7.
Preface
Brocade 5600 vRouter OSPFv3 Configuration Guide, 5.0R1
8 53-1004503-01

Online Telephone E-mail
Preferred method of contact for non-urgent
issues:
∙My Cases through MyBrocade
∙Software downloads and licensing
tools
∙Knowledge Base
Required for Sev 1-Critical and Sev 2-High
issues:
∙Continental US: 1-800-752-8061
∙Europe, Middle East, Africa, and Asia
Pacific: +800-AT FIBREE (+800 28
34 27 33)
∙For areas unable to access toll free
number: [phone]
∙Toll-free numbers are available in
many countries.
[email protected]
Please include:
∙Problem summary
∙Serial number
∙Installation details
∙Environment description
Brocade OEM customers
If you have purchased Brocade product support from a Brocade OEM/Solution Provider, contact your OEM/Solution Provider for all of
your product support needs.
∙OEM/Solution Providers are trained and certified by Brocade to support Brocade® products.
∙Brocade provides backline support for issues that cannot be resolved by the OEM/Solution Provider.
∙Brocade Supplemental Support augments your existing OEM support contract, providing direct access to Brocade expertise.
For more information, contact Brocade or your OEM.
∙For questions regarding service levels and response times, contact your OEM/Solution Provider.
Document feedback
To send feedback and report errors in the documentation you can use the feedback form posted with the document or you can e-mail
the documentation team.
Quality is our first concern at Brocade and we have made every effort to ensure the accuracy and completeness of this document.
However, if you find an error or an omission, or you think that a topic needs further development, we want to hear from you. You can
provide feedback in two ways:
∙Through the online feedback form in the HTML documents posted on www.brocade.com.
∙By sending your feedback to [email protected].
Provide the publication title, part number, and as much detail as possible, including the topic heading and page number if applicable, as
well as your suggestions for improvement.
Preface
Brocade 5600 vRouter OSPFv3 Configuration Guide, 5.0R1
53-1004503-01 9

Preface
Brocade 5600 vRouter OSPFv3 Configuration Guide, 5.0R1
10 53-1004503-01

About This Guide
This guide describes how to configure OSPFv3 on the Brocade vRouter (referred to as a virtual router, vRouter, or router in the guide).
Brocade 5600 vRouter OSPFv3 Configuration Guide, 5.0R1
53-1004503-01 11

About This Guide
Brocade 5600 vRouter OSPFv3 Configuration Guide, 5.0R1
12 53-1004503-01

OSPFv3 Configuration
∙OSPFv3 overview.............................................................................................................................................................................................................. 13
∙Support for OSPFv3 address families................................................................................................................................................................... 14
∙Supported standard...........................................................................................................................................................................................................14
∙Configuring OSPFv3........................................................................................................................................................................................................14
OSPFv3 overview
Open Shortest Path First Version 3 (OSPFv3) is a link-state Interior Gateway Protocol (IGP) developed by IETF and is based on OSPF
Version 2 (OSPFv2), which supports IPv4. For more information about OSPFv2, refer to Brocade 5600 vRouter OSPF Configuration
Guide . OSPFv3 adds support for IPv6 in the OSPF routing protocol and is described in RFC 5340. OSPFv3 works as in OSPFv2, that
is, OSPFv3 router IDs, area IDs, and LSA link-state IDs are 32 bits as in OSPFv2 IPv4. In addition, all optional capabilities of OSPFv2
for IPv4, for example, NSSA, are supported in OSPFv3 for IPv6.
However, some significant changes exist in OSPFv3 for IPv6 and these changes include the following:
∙Router LSAs and network LSAs no longer carry prefix information. In OSPFv3, these LSAs carry only the topology information.
∙New and modified LSAs have been created to handle the flow of IPv6 addresses and prefixes in an OSPFv3 network.
∙OSPFv3 runs on a per-link basis, instead of a per-IP-subnet basis. Two nodes can communicate over a link even when they do
not share a common IPv6 prefix.
∙Multiple OSPFv3 instances can run over the same link.
∙OSPFv3 supports stub areas.
∙IPv6 link-local addresses are used for OSPFv3 neighbor exchanges, except over virtual links. Link-local addresses have local
significance only.
∙The 32-bit router ID in OSPFv3 always identifies neighboring routers.
∙The flooding scope for LSAs is generalized into three categories for OSPFv3:
– Link-local scope. The OSPFv3 packet is flooded only to the members connected on a link.
– Area scope. The OSPFv3 packet is flooded to all members of an OSPFv3 area.
– AS scope. The OSPFv3 packet is flooded to all members of an AS.
∙Authentication is removed from the OSPFv3 protocol. Instead, OSPFv3 relies on the AH and ESP portions of the IPSec for all
authentication tasks in IPv6.
∙LSPs and traffic engineering are not supported in OSPFv3.
∙In OSPFv3, the Options field is available in only Hello packets, DD packets, Router LSAs, Network LSAs, Inter-Area-Router
LSAs, and Link LSAs.
∙OSPFv3 has two new LSAs: Link LSA and Intra Area Prefix LSA.
∙OSPFv3 communicates over IPv6, but can carry routing data for other address families, most notably IPv4.
OSPFv3 adds support for address families which helps OSPFv3 IPv6 networks to support both IPv6 and IPv4 nodes. For more
information on this feature, refer to Support for OSPFv3 address families on page 14.
Brocade 5600 vRouter OSPFv3 Configuration Guide, 5.0R1
53-1004503-01 13

Support for OSPFv3 address families
OSPFv3 communicates with peer routers over IPv6, but can carry routing data for other address families. By default, OSPFv3 supports
the IPv6 unicast address family. However, OSPFv3 can support other address families when configured to do so. The Brocade 5600
vRouter OSPFv3 implementation provides support for carrying IPv4 and IPv6 unicast routing data.
It is important to understand that instance identifiers not only identify a routing instance, but also identify an address family. The following
are the instance IDs breakdown:
∙Instance ID 0 to 31: IPv6 unicast AF
∙Instance ID 32 to 63: IPv6 multicast AF
∙Instance ID 64 to 95: IPv4 unicast AF
∙Instance ID 96 to 127: IPv4 multicast AF
OSPFv3 supports multiple OSPFv3 processes and each process may support one address family. Multiple routing instances within
each OSPFv3 process are also supported.
Supported standard
The Brocade Communications Systems, Inc. implementation of OSPFv3 complies with the following standards:
∙RFC 5340: OSPF for IPv6
∙RFC 5838: Support of Address Families in OSPFv3
Configuring OSPFv3
This section provides the following topics:
∙Basic OSPFv3 configuration on page 15
∙Verifying the OSPFv3 configuration on page 18
This section presents a sample configuration for OSPFv3. The configuration example is based on the following reference diagram.
OSPFv3 Configuration
Brocade 5600 vRouter OSPFv3 Configuration Guide, 5.0R1
14 53-1004503-01

FIGURE 1 OSPFv3 configuration reference diagram
Basic OSPFv3 configuration
In this section, you configure OSPFv3 on the routers labeled R1 and R2 in the reference network diagram.
To create a basic OSPFv3 configuration, perform the following steps in configuration mode:
TABLE 1 Basic OSPFv3 configuration
Router Step Commands
Configure Interface IP addresses and OSPFv3 Configuration
R1 Set an IPv6 address on interface dp0p1p2. vyatta@R1# set interfaces
dataplane dp0p1p2 address
2001:db8:0:4::1/64
R1 Set an IPv6 address on interface dp0p1p3. vyatta@R1# set interfaces
dataplane dp0p1p3 address
2001:db8:0:8::1/64
R1 Set the OSPFv3 area on interface dp0p1p2. vyatta@R1# set interfaces
dataplane dp0p1p2 ipv6 ospfv3
area 0.0.0.0
R1 Set the OSPFv3 area on interface dp0p1p3. vyatta@R1# set interfaces
dataplane dp0p1p3 ipv6 ospfv3
area 0.0.0.0
R1 Set the OSPFv3 area for a given process ID and
instance ID on interface dp0p1p2. vyatta@R1# set interfaces
dataplane dp0p1p2 ipv6 ospfv3
process labR instance-id 3 area
0.0.0.0
R1 Set the OSPFv3 area for a given process ID and
instance ID on interface dp0p1p3. vyatta@R1# set interfaces
dataplane dp0p1p3 ipv6 ospfv3
process labR instance-id 3 area
0.0.0.0
OSPFv3 Configuration
Brocade 5600 vRouter OSPFv3 Configuration Guide, 5.0R1
53-1004503-01 15

TABLE 1 Basic OSPFv3 configuration (continued)
Router Step Commands
R1 Display the configuration. vyatta@R1# show interfaces
dataplane dp0p1p2 {
address 2001:db8:0:4::1/64
duplex auto
hw-id 00:0c:29:09:3e:73
ipv6 {
dup-addr-detect-
transmits 1
ospfv3 {
area 0.0.0.0
process labR {
instance-id 3 {
area
0.0.0.0
}
}
}
}
}
dataplane dp0p1p3 {
address 2001:db8:0:8::1/64
duplex auto
hw-id 00:0c:29:09:3e:7d
ipv6 {
dup-addr-detect-
transmits 1
ospfv3 {
area 0.0.0.0
process labR {
instance-id 3 {
area
0.0.0.0
}
}
}
}
}
Configure OSPFv3 Protocol Commands
R1 Specify the OSPFv3 address range and
advertise this range. vyatta@R1# set protocols ospfv3
process labR area 0.0.0.0 range
2001::1/128 advertise
R1 Set the global router ID for OSPFv3. vyatta@R1# set protocols ospfv3
process labR router-id
10.10.10.10
R1 Commit the configuration. vyatta@R1# commit
R1 Display the configuration. vyatta@R1# show protocols
ospfv3 {
process labR {
area 0.0.0.0 {
}
router-id 10.10.10.10
}
}
Configure Interface IP Addresses and OSPFv3 Configuration
OSPFv3 Configuration
Brocade 5600 vRouter OSPFv3 Configuration Guide, 5.0R1
16 53-1004503-01

TABLE 1 Basic OSPFv3 configuration (continued)
Router Step Commands
R2 Set an IPv6 address on interface dp0p1p2. vyatta@R2# set interfaces
dataplane dp0p1p2 address
2001:db8:0:4::2/64
R2 Set an IPv6 address on interface dp0p1p3. vyatta@R2# set interfaces
dataplane dp0p1p3 address
2001:db8:0:200::/64
R2 Set the OSPFv3 area on interface dp0p1p2. vyatta@R2# set interfaces
dataplane dp0p1p2 ipv6 ospfv3
area 0.0.0.0
R2 Set the OSPFv3 area for a given process ID and
instance ID on interface dp0p1p2. vyatta@R2# set interfaces
dataplane dp0p1p2 ipv6 ospfv3
process labR instance-id 3 area
0.0.0.0
R2 Display the interface configuration. vyatta@R2# show interfaces
dataplane dp0p1p2 {
address 2001:db8:0:4::2/64
duplex auto
hw-id 00:0c:29:4b:d8:ff
ipv6 {
dup-addr-detect-
transmits 1
ospfv3 {
area 0.0.0.0
process labR {
instance-id 3 {
area
0.0.0.0
}
}
}
}
}
dataplane dp0p1p3 {
address 2001:db8:0:200::/64
duplex auto
hw-id 00:0c:29:4b:d8:09
speed auto
}
Configure OSPFv3 Protocol Commands
R2 Specify the OSPFv3 address range and
advertise this range. vyatta@R2# set protocols ospfv3
process labR area 0.0.0.0 range
2001::2/128 advertise
R2 Set the global OSPFv3 parameter of a router ID. vyatta@R2# set protocols ospfv3
process labR router-id
10.10.10.11
R2 Commit the configuration. vyatta@R2# commit
R2 Display the configuration. vyatta@R2# show protocols
ospfv3 {
process labR {
area 0.0.0.0 {
range 2001::2/128 {
OSPFv3 Configuration
Brocade 5600 vRouter OSPFv3 Configuration Guide, 5.0R1
53-1004503-01 17

TABLE 1 Basic OSPFv3 configuration (continued)
Router Step Commands
advertise
}
}
router-id 10.10.10.11
}
}
Verifying the OSPFv3 configuration
The following operational mode commands can be used to verify the OSPFv3 configuration.
R1: show ipv6 ospfv3 neighbor
The following example shows the output of the show ipv6 ospfv3 neighbor command for router R1.
Verifying OSPFv3 on R1: "show ipv6 ospfv3 neighbor”
vyatta@R1:~$ show ipv6 ospfv3 neighbor
OSPFv3 Process (labR)
Neighbor ID Pri State Dead Time Interface Instance ID
10.10.10.11 1 Full/DR 00:00:34 dp0p1p2 3
R1: show ipv6 route
The following example shows the output of the show ipv6 route command for router R1.
Verifying OSPFv3 on R1: ”show ipv6 route”
vyatta@R1:~$ show ipv6 route
IPv6 Routing Table
Codes: K - kernel route, C - connected, S - static, R - RIP, O - OSPF,
IA - OSPF inter area, E1 - OSPF external type 1,
E2 - OSPF external type 2, I - IS-IS, B - BGP
> - selected route, * - FIB route, p - stale info
Timers: Uptime
C *> ::1/128 is directly connected, lo
O 2001:db8:0:4::/64 [110/1] is directly connected, dp0p1p2, 23:39:41
C *> 2001:db8:0:4::/64 is directly connected, dp0p1p2
O 2001:db8:0:8::/64 [110/1] is directly connected, dp0p1p3, 23:39:41
C *> 2001:db8:0:8::/64 is directly connected, dp0p1p3
C * fe80::/64 is directly connected, dp0p1p2
C * fe80::/64 is directly connected, dp0p1p1
C *> fe80::/64 is directly connected, dp0p1p3
K *> ff00::/8 is directly connected, dp0p1p2
K * ff00::/8 is directly connected, dp0p1p1
K * ff00::/8 is directly connected, dp0p1p3
R2: show ipv6 ospfv3 neighbor
The following example shows the output of the show ipv6 ospfv3 neighbor command for router R2.
Verifying OSPFv3 on R2: ”show ipv6 ospfv3 neighbor”
vyatta@R2:~$ show ipv6 ospfv3 neighbor
OSPFv3 Process (labR)
Neighbor ID Pri State Dead Time Interface Instance ID
10.10.10.10 1 Full/Backup 00:00:36 dp0p1p2 3
OSPFv3 Configuration
Brocade 5600 vRouter OSPFv3 Configuration Guide, 5.0R1
18 53-1004503-01

R2: show ipv6 route
The following example shows the output of the show ipv6 route command for router R2.
Verifying OSPFv3 on R2: ”show ipv6 route”
vyatta@R2:~$ show ipv6 route
IPv6 Routing Table
Codes: K - kernel route, C - connected, S - static, R - RIP, O - OSPF,
IA - OSPF inter area, E1 - OSPF external type 1,
E2 - OSPF external type 2, I - IS-IS, B - BGP
> - selected route, * - FIB route, p - stale info
Timers: Uptime
C *> ::1/128 is directly connected, lo
O 2001:db8:0:4::/64 [110/1] is directly connected, dp0p1p2, 23:44:53
C *> 2001:db8:0:4::/64 is directly connected, dp0p1p2
O *> 2001:db8:0:8::/64 [110/2] via fe80::20c:29ff:fe09:3e73, dp0p1p2, 23:44:02
C *> 2001:db8:0:200::/64 is directly connected, dp0p1p3
C *> 2004::/64 is directly connected, lo
C * fe80::/64 is directly connected, dp0p1p2
C * fe80::/64 is directly connected, dp0p1p1
C *> fe80::/64 is directly connected, dp0p1p3
K *> ff00::/8 is directly connected, dp0p1p2
K * ff00::/8 is directly connected, dp0p1p1
K * ff00::/8 is directly connected, dp0p1p3
R2: ping 2001:db8:0:8::1
Using the ping command from R2, we can verify that we can reach hosts on remote networks. In this case we ping an IP address on R1.
This verification is shown in the following example.
Verifying OSPF on R2: “ping6 2001:db8:0:8::1”
vyatta@R2# ping6 2001:db8:0:8::1
PING 2001:db8:0:8::1(2001:db8:0:8::1) 56 data bytes
64 bytes from 2001:db8:0:8::1: icmp_seq=1 ttl=64 time=0.460 ms
64 bytes from 2001:db8:0:8::1: icmp_seq=2 ttl=64 time=0.153 ms
64 bytes from 2001:db8:0:8::1: icmp_seq=3 ttl=64 time=0.209 ms
64 bytes from 2001:db8:0:8::1: icmp_seq=4 ttl=64 time=0.156 ms
64 bytes from 2001:db8:0:8::1: icmp_seq=5 ttl=64 time=0.163 ms
64 bytes from 2001:db8:0:8::1: icmp_seq=6 ttl=64 time=0.159 ms
--- 2001:db8:0:8::1 ping statistics ---
6 packets transmitted, 6 received, 0% packet loss, time 4997ms
rtt min/avg/max/mdev = 0.153/0.216/0.460/0.111 ms
The output confirms that the OSPFv3 configuration is working and that we are able to reach a remote network.
OSPFv3 Configuration
Brocade 5600 vRouter OSPFv3 Configuration Guide, 5.0R1
53-1004503-01 19

OSPFv3 Configuration
Brocade 5600 vRouter OSPFv3 Configuration Guide, 5.0R1
20 53-1004503-01