Brookstone bluetooth keyboard case User manual

654186_INS0111_Leather Case for iPad_Wx4.75”H_Output:100%_Prints:1/1,Blk
Bluetooth®Keyboard Case
For iPadTM

1
TABLE OF CONTENTS
BatteryPrecautionsandFCC..............................................2
LocationofPartsandControls.............................................4
InsertingyouriPadintotheCase...........................................5
ChargingtheKeyboard....................................................5
Syncing the Bluetooth®toyouiPad.........................................6
CareandMaintenance.....................................................7
Specifications.............................................................7
Troubleshooting...........................................................8
Warranty..................................................................9

2
BATTERY PRECAUTIONS
• Dispose of old batteries properly. Do not dispose of old batteries in a fire.
• Do not leave batteries where a young child or pet could play with or swallow
them. If the batteries are swallowed, contact a physician immediately.
• Batteries may explode if mistreated. Do not attempt to recharge or disassemble
the batteries.
• Use only fresh batteries of required size and type. Do not mix old and
new batteries, different types of batteries, or rechargeable batteries
of different capacities.
654186_INS0111_Leather Case for iPad_Wx4.75”H_Output:100%_Prints:1/1,Blk

FCC INFORMATION
This equipment has been tested and found to comply with the limits for a Class B
Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions:
1. This equipment may not cause harmful interference.
2. This equipment must accept any interference received, including interference
that may cause undesired operation.
Modifications not authorized by the manufacturer may void the user’s authority
to operate this device.
3

LOCATION OF PARTS AND CONTROLS
1. iPad Security Tab
2. iPad Frame
3. Bluetooth®Keyboard
4. Control Panel
3
2
1
4
4
Home
654186_INS0111_Leather Case for iPad_Wx4.75”H_Output:100%_Prints:1/1,Blk

INSERTING YOUR iPad INTO THE CASE
1. Open the Bluetooth®Keyboard Case completely.
2. Pull the iPad Security Tab out from the frame.
3. Slide your iPad into the frame so that its screen is facing out of the frame
and its Power Button is accessible.
4. Tuck the iPad Security Tab back in behind your iPad.
CHARGING THE KEYBOARD
1. Plug the charging cord (included) into the charging outlet at the control panel
and into a USB outlet. (see the illustration below for part locations).
2. The charging LED will illuminate red during charging, and shuts off when
charging is complete.
3. The keyboard takes approximately 4.5 hours to charge for up to 90 hours of use.
Note: The charging LED indicator will blink when your Bluetooth®Keyboard
Case’s battery needs recharging.
5
Charging Outlet
On/Off Switch
Power LED
Charge LED
Bluetooth®LED
Bluetooth®
Connect Button
Home

6
SYNCING THE BLUETOOTH®TO YOUR iPad
1. Power on your iPad.
2. Slide the On/Off switch on the Bluetooth®Keyboard Case to “on”.
Both the Bluetooth®LED and the power LED illuminators will light up
for a few seconds and then shut off.
3. Press the Bluetooth®Connect button. The Power LED will illuminate
and the Bluetooth®LED will flash.
4. Select the Settings icon on your iPad tablet’s screen.
5. Locate and select “Bluetooth” in your iPad tablet’s settings menu.
6. Under Devices on your iPad, select the Bluetooth®Keyboard Case.
7. The iPad will now prompt you to enter your computer Bluetooth®password
and press either the Return or Enter key using the Bluetooth®Keyboard Case.
8. The iPad screen should now show the Bluetooth®Keyboard Case has
connected successfully.
9. The Power LED will remain illuminated while the keyboard is powered on.
10. Slide the On/Off switch to “off” when you are done using the keyboard.
11. From now on when you use the Bluetooth®Keyboard Case with your iPad,
it should already be connected. If you use it with a new iPad, or it doesn’t
connect properly, follow the steps above to reconnect.
Note: The Bluetooth®Keyboard Case will automatically go into standby
mode after 15 minutes of non-use in order to preserve battery life.
Just press any key to reactivate the keyboard.
654186_INS0111_Leather Case for iPad_Wx4.75”H_Output:100%_Prints:1/1,Blk

7
CARE AND MAINTENANCE
• Ensure you slide the On/Off switch to “off” when you have finished using
your Bluetooth®Keyboard Case. This should preserve battery life.
• Fold the Bluetooth®Keyboard Case up so you can secure the flap
with the imbedded magnets.
• Do not allow any heavy objects to be placed on the Bluetooth®Keyboard
Case, with or without your iPad within it, as this may damage the keyboard
and/or iPad components.
• Wipe the exterior of the Bluetooth®Keyboard Case with a clean, soft, dry cloth.
• Store the Bluetooth®Keyboard Case with at least 50% of its battery charged.
SPECIFICATIONS
Bluetooth®...................................V2.0
Bluetooth®Working Distance. . . . . . . . . . . . . . . . . . 32'
OperatingVoltage............................3.0-5.0
ChargingMeans..............................USB2.0
ChargingTime...............................4-4.5hours
Battery Usage Time . . . . . . . . . . . . . . . . . . . . . . . . . . Up to 90 continuous hours
BatteryLife..................................3years
Dimensions..................................9.75"lx7.75"wx1"h

8
TROUBLESHOOTING
ISSUE SOLUTION
The keyboard will not
work with my iPad.
Make sure that the keyboard
is synced correctly. Power the keyboard
off and then on and try again.
If the iPad has been upgraded,
or you are using a different iPad, resync
using the steps on the previous pages.
Check the battery power.
You may need to recharge the
Bluetooth®Keyboard Case.
Make sure that both your iPad
and the Bluetooth®Keyboard Case
are on and in good working order.
iPad is a trademark of Apple Inc.
Bluetooth is a registered trademark of Bluetooth Sig, Inc.
654186_INS0111_Leather Case for iPad_Wx4.75”H_Output:100%_Prints:1/1,Blk

ONE (1) YEAR LIMITED WARRANTY
Brookstone®warrants this product against defects in materials and/or workmanship
under normal use for a period of ONE (1) YEAR from the date of purchase by the
original purchaser (“Warranty Period”). If a defect arises and a valid claim is received
within the Warranty Period, at its option, Brookstone will either 1) repair the defect
at no charge, using new or refurbished replacement parts, or 2) replace the product
with a new product that is at least functionally equivalent to the original product, or
3) provide a store credit in the amount of the purchase price of the original product.
A replacement product or part, including a user-installable part installed in accordance
with instructions provided by Brookstone, assumes the remaining warranty of the
original product. When a product or part is exchanged, any replacement item becomes
your property and the replaced item becomes Brookstone’s property. When a store
credit is given, the original product must be returned to Brookstone and becomes
Brookstone’s property.
ObtainingService:Toobtainwarrantyservice,callBrookstoneLimitedWarrantyServiceat
1-800-292-9819. Please be prepared to describe the product that needs service and
the nature of the problem. A purchase receipt is required. All repairs and replacements
must be authorized in advance. Service options, parts availability and response times
will vary. You are responsible for delivery and the cost of delivery of the product or any
parts to the authorized service center for replacement, per our instructions.
Limits and Exclusions: Coverage under this Limited Warranty is limited to the United
States of America, including the District of Columbia and the U.S. Territories of
Guam, Puerto Rico, and the U.S. Virgin Islands. This Limited Warranty applies only
to products manufactured for Brookstone that can be identified by the “Brookstone”
trademark, trade name, or logo affixed to them or their packaging. The Limited
Warranty does not apply to any non-Brookstone products. Manufacturers or
suppliers other than Brookstone may provide their own warranties to the purchaser,
9

but Brookstone, in so far as permitted by law, provides these products “as is.”
This warranty does not apply to: a) damage caused by failure to follow instructions
relating to product’s use or the installation of components; b) damage caused by
accident, abuse, misuse, fire, floods, earthquake or other external causes; c) damage
caused by service performed by anyone who is not a representative of Brookstone;
d) accessories used in conjunction with a covered product; e) a product or part
that has been modified to alter functionality or capability; f) items intended to be
periodically replaced by the purchaser during the normal life of the product including,
without limitation, batteries or light bulbs; g) any product sold “as is” including, without
limitation, floor demonstration models and refurbished items; or h) a product that is
used commercially or for a commercial purpose.
BROOKSTONE SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING
OUT OF ANY BREACH OF THIS WARRANTY. TO THE EXTENT PERMITTED BY
APPLICABLE LAW, BROOKSTONE DISCLAIMS ANY AND ALL STATUTORY OR
IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
WARRANTIES AGAINST HIDDEN OR LATENT DEFECTS. IF BROOKSTONE
CANNOT LAWFULLY DISCLAIM STATUTORY OR IMPLIED WARRANTIES, THEN
TO THE EXTENT PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE
LIMITED IN DURATION TO THE DURATION OF THIS EXPRESS WARRANTY.
Some states disallow the exclusion or limitation of incidental or consequential damages
or how long an implied warranty lasts, so the above exclusions or limitations may not
apply to you. This warranty gives you specific legal rights and you may also have other
rights, which vary from state to state.
10
654186_INS0111_Leather Case for iPad_Wx4.75”H_Output:100%_Prints:1/1,Blk

654186
Merrimack, New Hampshire USA 03054 • 800-846-3000 • www.Brookstone.com