Brookstone BKSPB-BF User manual

USER MANUAL
SMART PLUG
FCC ID: 2AQNX-SP10 For more products please visit
www.smartpointco.com or www.brookstone.com

FCC Statement:
1. This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Caution: The user is cautioned that changes or modifications not
expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
2. This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20cm between
the radiator and any part of your body.
For more products please visit
www.smartpointco.com or www.brookstone.com

SPECIFICATIONS
Model: BKSPB-BF
Main Material: PC V0 Fire Retardant
Input Voltage: AC 100-240V 50/60Hz
Max Load: 10A
Max Power: 1100W (110V)
Working temperature: -4° - 140°
Size:49x31mm
Wi-Fi Standard: 2.4GHz 802.11b/g/n
System Support: Android™/iOS
WARRANTY INFORMATION
One Year Limited Warranty.
Customer Service: 732-994-2301; email: [email protected]
©Smartpoint LLC,
250 Liberty Street, Suite 1A
Metuchen, NJ 08840
The BROOKSTONE trademark. names and logos are owned by
BKST Brand Holdings LLC ©2021. All rights reserved.
Manufactured, marketed and distributed by Smartpoint LLC, under license.
Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates.
Google, Android and Google Play are trademarks of Google LLC.
App Store
®
is a registered trademark of Apple, Inc.
All trademarks and registered trademarks are property of their respective owners.
Made in China
For more products please visit
www.smartpointco.com or www.brookstone.com

FEATURES
• Wi-Fi remote controlled
• Programmable with Schedule
• App and Voice Control
• Works with Hey Google or Amazon Alexa
For more assistance on Troubleshooting,
Connecting and Tips on Using your New Device,
you can visit:
www.smartpointco.com/faq-trouble-shooting

On/Off Button
(reset)
Power Socket
PRODUCT CONFIGURATION
Items included in package:
Smart Plug and User Manual.

DOWNLOAD APP
Brookstone Smart
1. Android™: download “Brookstone Smart” app
on Google Play.
2. iPhone: download “Brookstone Smart” app
from the App Store.

REGISTRATION AND LOGIN
1. Run the “Brookstone Smart” app from your
smart phone.
2. Register and login.
*Screenshots may slightly differ from actual app.
*

1. Plug in Smart Plug into electrical socket and
hold down on/off button until the light
blinks rapidly.
2. Make sure phone is connected to your Wi-Fi
network and that it is a 2.4GHz network.
3. Press the (+) symbol in the top right corner of
the app and select the Smart Plug from
the list of devices to add.
ADD DEVICE

1. Plug in Smart Plug into electrical socket and
hold down on/off button until the light
blinks rapidly.
2. Make sure phone is connected to your Wi-Fi
network and that it is a 2.4GHz network.
3. Press the (+) symbol in the top right corner of
the app and select the Smart Plug from
the list of devices to add.
5. Make sure phone is connected to the Wi-Fi
network that the device will be connected to.
Enter your password for the Wi-Fi network.
4. Confirm indicator light is blinking and press
the “confirm indicator rapidly blinks” button.

6. Connecting process will begin. Do not turn off
Smart Plug or phone while connecting. Wait for
connection process to complete.
7. Once device has been successfully added, name
the device what you would like it to be called in
the app. The Smart Plug is ready for use.
5. Make sure phone is connected to the Wi-Fi
network that the device will be connected to.
Enter your password for the Wi-Fi network.
4. Confirm indicator light is blinking and press
the “confirm indicator rapidly blinks” button.

PUSH NOTIFICATIONS
1. You can turn on/off notifications for all devices
connected to app by clicking on the “Me” button at the
bottom right of the screen.
2. Then click on ”Settings” button. From there you can turn
on/off all notifications.

REMOVE A DEVICE
1. From the home screen, click on the device you would like
to remove.
2. Then click on the edit symbol on the top right of the
screen.
3. From there you would then click the “Remove Device”
button at the bottom of the screen.

How to control the Smart Plug with Amazon Alexa
Please make sure that your Alexa app is
connected to your Amazon Echo and both
work together successfully on your Wi-Fi
home network.
Step A. Log into your Alexa app, tap bottom
right corner, and then tap “Skills & Games”.

How to control the Smart Plug with Amazon Alexa
Step E. Wait a few seconds for Alexa to detect the Smart Plug
from the Brookstone Smart app and you will find the device
named “Smart Plug” has been paired to Alexa app from
“Brookstone Smart” app. Follow the on-screen instructions to
further set up the device.
The plug will be named whatever you named it in the
Brookstone Smart App.
Step B. Type “Brookstone Smart”, find “Brookstone Smart” app
in the search results and tap and then tap “enable to use”.
Step C. Enter your account info for the “Brookstone
Smart” app, tap “Link Now”, then tap “Brookstone
Smart” and tap “Link Now” again. On the next page
press “Authorize” to link Brookstone Smart account to
Alexa.
Step D. Once your Brookstone Smart account is successfully
linked to Alexa, the next page will pop up. Tap ”Close” at the
bottom and then tap “Discover Devices” on the next page at the
bottom right.

Step E. Wait a few seconds for Alexa to detect the Smart Plug
from the Brookstone Smart app and you will find the device
named “Smart Plug” has been paired to Alexa app from
“Brookstone Smart” app. Follow the on-screen instructions to
further set up the device.
The plug will be named whatever you named it in the
Brookstone Smart App.
Step D. Once your Brookstone Smart account is successfully
linked to Alexa, the next page will pop up. Tap ”Close” at the
bottom and then tap “Discover Devices” on the next page at the
bottom right.

After Step E is done, you can now control the Smart Plug with
Alexa app from the devices page.
Step F. Now you are able to control the Smart Plug via
Amazon Alexa with your voice.
Try these commands and see what happens by
asking Alexa:
• Alexa, turn on “Smart Plug”
• Alexa, turn off “Smart Plug”
Note: The device name is the one you give to the
smart plug on “Brookstone Smart” app. Let’s name it
“Living Room”.
For example, now you can say:
• “Alexa, turn on the Living Room”,
• “Alexa, turn off the Living Room”, etc.
Any device you connect to the Brookstone Smart App
should automatically be added to Alexa. If it does not
add automatically, ask Alexa to discover devices.

1. Pair Smart Plug with Brookstone Smart App
and name it with an easily recognizable
name.
2. Download the Google Home App and
register and log in with your Google
Account info.
How to control the Smart Plug with Google Assistant
Step A. Once you are logged into your Google Home App,
press the (+) icon in the top left hand corner.

1. Pair Smart Plug with Brookstone Smart App
and name it with an easily recognizable
name.
2. Download the Google Home App and
register and log in with your Google
Account info.
How to control the Smart Plug with Google Assistant
Step B. On the next page press “Set up device”, and then on
the page after that select “Works with Google”.

Step C. Press the magnifying glass icon to type in the app
you would like to link to your Google Home account. In this
case, type in “Brookstone Smart” and then select it from the
list below.

Step D. Enter your account info for the “Brookstone Smart”
app, tap “Link Now”. On th next page select the correct app
to link and then press “Link Now” again.