Brookstone u Control User manual

651463_INS_Dancing Truck V2_5”Wx4.75”H_Output:100%_Prints:1/0 Blk
DANCING RC TRUCK
WARNING:
This product may contain small parts which
may pose a choking hazard to children.
AGES
8+
AND UP

Table of conTenTs
Cautions, FCC Information and Battery Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . 2
LocationofPartsandControls.............................................6
InstallingtheBatteries.....................................................8
AntennaInstallation........................................................8
ChargingYourTruck.......................................................9
Let’sGo!.................................................................10
SpecialStunts............................................................12
OtherButtonFunctions...................................................13
HelpfulHints.............................................................14
CareandMaintenance....................................................15
Specifications............................................................16
Warranty.................................................................17
1

2
651463_INS_Dancing Truck V2_5”Wx4.75”H_Output:100%_Prints:1/0 Blk
ReaD THese InsTRUcTIons befoRe fIRsT Use!
Please read this instruction manual prior to using your truck in order to
familiarize yourself with the product functions. Be sure to follow all battery
warnings and charging instructions to ensure proper and safe operation
of your vehicle.
save THese InsTRUcTIons!

3
caUTIon
• For ages 8 and up.
• Keep the truck away from face, eyes and hair at all times.
• Keep fingers away from moving wheels and axles.
• Keep hands, hair, jewelry and loose clothing away from the wheels
any time the transmitter power is turned to the ON position.
• Recommended for indoor use, and only in rooms without obstacles
and/or breakable objects.
• The charger provided in this package is for charging the truck ONLY.
• Do not use any other source to charge the truck.
• Do not leave truck connected to the charger in storage or for extended
periods of time.
• Do not drop in, spray with or submerge remote or truck in water.
• Be careful not to break the antenna.
• Be careful not to point the antenna towards your eyes or the eyes
of spectators, as this may result in an injury.
• Do not operate this vehicle in the sand, as damage to the vehicle
may occur.
cUTTIng/cHokIng HazaRD
WARNING: This product may contain sharp parts and small parts which
may pose a cutting and choking hazard to children.

fcc InfoRMaTIon
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received including interference
that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment. Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in
a residential installation. This unit generates, uses and can radiate radio frequency
energy and if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try and correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
4
651463_INS_Dancing Truck V2_5”Wx4.75”H_Output:100%_Prints:1/0 Blk

5
baTTeRY PRecaUTIons
• Dispose of the old batteries properly. Do not dispose of the old batteries
in a fire.
• Do not leave the batteries where a child or pet could play with or swallow
them. If the batteries are swallowed, contact a physician immediately.
• The batteries may explode if mistreated. Do not attempt to recharge or
disassemble the batteries.
• Use only fresh batteries of the required size and type. Do not mix old and
new batteries, different types of batteries or rechargeable batteries of
different capacities.
• Remove the batteries from the transmitter when it is not in use for a long
period of time, or while storing.
• DO NOT leave the transmitter/charger connected to the truck overnight
or for long periods of time. Disconnect the transmitter/charger after the
truck battery is fully charged.

1. Truck Body
2. Chassis
3. Charge Port
4. Truck On/Off Switch
locaTIon of PaRTs anD conTRols
1
6
651463_INS_Dancing Truck V2_5”Wx4.75”H_Output:100%_Prints:1/0 Blk
34
2

7
1. Antenna
2. Music ON/OFF Select Track
3. Forward/Backward Control
4. Remote On/Off Switch
5. Demo Switch
6. Charging Plug Compartment
7. Right/Left Turn Control
8. Start/Stop/Horn Control
9. Charging/Power Indicator Lights
locaTIon of PaRTs anD conTRols
1
2
4
7
6
5
8
3
9

InsTallIng THe baTTeRIes
1. Turn the remote control over to access the BATTERY COMPARTMENT
on the back.
2. Unscrew the one screw and push the LATCH LOCK in towards the
BATTERY COMPARTMENT COVER and remove (see below).
3. Insert 6 AAA batteries according to the polarity indicators inside the compartment.
4. Replace the BATTERY COMPARTMENT COVER by sliding the two tabs
on the cover into the slots in the housing and snapping the LATCH LOCK
securely into place, then replace the screw.
anTenna InsTallaTIon
Install the included ANTENNA into the top of the wireless controller (see above).
When installing the ANTENNA, turn or “screw” the antenna clockwise until it stops
moving. Never force the ANTENNA once it stops turning.
Hint: Remember to extend the antenna for maximum performance and control.
8
651463_INS_Dancing Truck V2_5”Wx4.75”H_Output:100%_Prints:1/0 Blk
Latch Lock
Battery
Compartment
Antenna
Screw Hole
Slots (2)

9
cHaRgIng YoUR TRUck
1. Make sure the ON/OFF SWITCH on
the truck is set to the OFF position.
2. Slide the CHARGING PLUG
COMPARTMENT cover on the front
of the remote open to access the
CHARGING PLUG.
Note: You may need to use your
fingernail to start the door sliding.
3. Connect the CHARGING PLUG on the
remote to the CHARGING SOCKET on
the side of the truck (see Figure 1).
4. Turn the remote’s ON/OFF SWITCH to the ON position. The CHARGING
INDICATOR LIGHT on the remote will blink, indicating that charging is in process.
Note: The length of charging time will vary depending on the percentage of
the battery already charged and the strength and condition of the AA batteries
in the charger. Average charge time is 12 minutes.
5. The CHARGING INDICATOR LIGHT will shut off when the truck is fully charged.
6. Unplug the CHARGING PLUG from the CHARGING SOCKET and store in
the CHARGING PLUG COMPARTMENT so it doesn’t interfere with the controls.
Note: Always disconnect the charger cord from the truck and remote after charging.
Never leave the truck charging overnight or for extended periods of time.
Figure 1

10
leT’s go!
DEMO MODE
1. Turn on the remote by sliding the ON/OFF switch on the front of the remote
to ON. The red LED on the front of the remote will illuminate.
2. Turn on the truck by sliding the ON/OFF switch on the side of the truck to the
ON position. You will hear a “beep” and the truck’s running lights will illuminate.
3. Press the START/STOP button on the upper right edge of the remote control
unit to “start”the vehicle.
4. To familiarize yourself with the various functions of the vehicle, press the
DEMO button on the remote to watch the vehicle dance by itself to music.
5. Press the DEMO button again to watch the vehicle dance to the next
soundtrack. There are three built-in soundtracks.
6. To stop the demo mode: While in demo, press the START/STOP button.
651463_INS_Dancing Truck V2_5”Wx4.75”H_Output:100%_Prints:1/0 Blk

11
MANUAL DRIVING
1. Turn on the remote by sliding the ON/OFF switch on the front of the remote
to ON. The red LED on the front of the remote will illuminate.
2. Turn on the truck by sliding the ON/OFF switch on the side of the truck to the
ON position. You will hear a “beep” and the truck’s running lights will illuminate.
3. Press the START/STOP button on the upper right edge of the remote control
unit to “start” the vehicle. You can begin to drive after you hear the vehicle’s
ignition-start sound.
4. Operate the vehicle and do crazy stunts by using the LEFT/RIGHT and
FORWARD/BACK control pads. See page 10 for stunt driving tips!
5. To turn off your truck, make sure to first turn off your remote, then slide the
switch on the side of the truck to OFF. When your vehicle is powered off,
the running lights will turn off.
Note: The vehicle will not operate unless the START/STOP button
is pressed and you hear the initial ignition-start sound.

12
651463_INS_Dancing Truck V2_5”Wx4.75”H_Output:100%_Prints:1/0 Blk
sPecIal sTUnTs
90° POP-UPS
When the vehicle is moving backwards at a moderate speed, quickly press
FORWARD (the upper part of the left control pad) and the vehicle will jump up
90° on its rear tires. When the vehicle is at 90°, press BACKWARD (the lower
part of the left control pad) and it will return to normal 4-wheel operation.
360° SPINS
When the truck is in the 90° position you can spin left and right 360° degrees.
To make a “left 360° spin,” simultaneously press the FORWARD and LEFT control
pads. To make a “right 360° spin,” simultaneously press on the FORWARD and
RIGHT control pads.
SWAY LEFT AND RIGHT
Make your vehicle dance to the music when it is riding at 90° by pressing
the LEFT and RIGHT control pads.
LIGHT SHOW
When using your vehicle in a dimly lit area, it creates a multi-colored light show.

13
oTHeR bUTTon fUncTIons
HORN: Tap the START/STOP button to sound the vehicle’s built-in horn.
PLAY MUSIC: Press the MUSIC button on the upper left edge of the remote
control to listen to the built-in soundtracks. Press the MUSIC button again to
cycle through the three soundtracks.
TURN OFF THE MUSIC: While playing a music track, tap the START/STOP
button to turn off the music.
LOCK THE VEHICLE: Hold down the START/STOP button for approximately
3 seconds to lock the vehicle. You will hear the words “bye-bye” and the motor
will turn off.
NOTE: When the vehicle is locked, the lighting system will flash
a repeating pattern until you unlock the vehicle and start the vehicle
again. To unlock the vehicle, hold down the START/STOP button.

14
651463_INS_Dancing Truck V2_5”Wx4.75”H_Output:100%_Prints:1/0 Blk
HelPfUl HInTs
NOT ENOUGH GET-UP-AND-GO?
1. Your batteries may be low–or the truck may need recharging.
Replace the batteries and/or recharge the truck and try again.
NO CONTROL?
1. Are you in the sun? Sometimes infrared signals are interrupted by sunlight,
so if you are trying to drive your truck in a very sunny room, you may experience
loss of control. This toy is made to be used indoors.
Outdoor use is not recommended.
2. Are you and a friend driving two trucks at the same time? You must make
sure you choose different frequencies when you purchase two different trucks
to be operated simultaneously. The trucks come in 27 mHz and 49 mHz
frequencies. This is marked clearly on the front of each box.
3. Your batteries may be low–or the truck may need recharging.
Replace the batteries and/or recharge the truck and try again.
TRUCK DISPLAYING ERRATIC BEHAVIOR?
1. It is possible that the AXLES or WHEELS have some debris caught
in the mechanism. Check for lint, dust or hair, clear the mechanism
gently and try again.
2. Your batteries may be low–or the truck may need recharging.
Replace the batteries and/or recharge the truck and try again.

15
caRe anD MaInTenance
• Remove the batteries from the remote when the toy is not being used
for an extended period of time.
• Turn both the truck and the remote off before cleaning.
• Wipe the truck and the remote housing clean with a soft, slightly damp cloth.
Do not use abrasive or harsh cleaning agents.
• Ensure there is no hair, lint or other debris caught between the axles
and the drive shaft on the truck. Clean carefully with your fingers or
a pair of tweezers.

16
sPecIfIcaTIons
Power
Truck ............................................InternalRechargeableBattery
Remote......................................6AAABatteries
Truck
Dimensions..................................4"lx3"wx3"h
Weight........................................4oz
Remote
Dimensions..................................4"lx2"wx1"h
Weight (without batteries) . . . . . . . . . . . . . . . . . . . . . 2.6 oz
Approximate Charge Time. . . . . . . . . . . . . . . . . . . . . 12 Minutes
Approximate Run Time. . . . . . . . . . . . . . . . . . . . . . . . 8-10 Minutes
Maximum Distance of Remote. . . . . . . . . . . . . . . . . 25 Feet

17
one (1) YeaR lIMITeD WaRRanTY
Brookstone®warrants this product against defects in materials and/or workmanship
under normal use for a period of ONE (1) YEAR from the date of purchase by the
original purchaser (“Warranty Period”). If a defect arises and a valid claim is received
within the Warranty Period, at its option, Brookstone will either 1) repair the defect
at no charge, using new or refurbished replacement parts, or 2) replace the product
with a new product that is at least functionally equivalent to the original product, or
3) provide a store credit in the amount of the purchase price of the original product.
A replacement product or part, including a user-installable part installed in accordance
with instructions provided by Brookstone, assumes the remaining warranty of the
original product. When a product or part is exchanged, any replacement item becomes
your property and the replaced item becomes Brookstone’s property. When a store
credit is given, the original product must be returned to Brookstone and becomes
Brookstone’s property.
ObtainingService:Toobtainwarrantyservice,callBrookstoneLimitedWarrantyService at
1-800-292-9819. Please be prepared to describe the product that needs service and
the nature of the problem. A purchase receipt is required. All repairs and replacements
must be authorized in advance. Service options, parts availability and response times
will vary. You are responsible for delivery and the cost of delivery of the product or any
parts to the authorized service center for replacement, per our instructions.
Limits and Exclusions: Coverage under this Limited Warranty is limited to the United
States of America, including the District of Columbia and the U.S. Territories of
Guam, Puerto Rico, and the U.S. Virgin Islands. This Limited Warranty applies only
to products manufactured for Brookstone that can be identified by the “Brookstone”
trademark, trade name, or logo affixed to them or their packaging. The Limited
Warranty does not apply to any non-Brookstone products. Manufacturers or
suppliers other than Brookstone may provide their own warranties to the purchaser,

18
but Brookstone, in so far as permitted by law, provides these products “as is.”
This warranty does not apply to: a) damage caused by failure to follow instructions
relating to product’s use or the installation of components; b) damage caused by
accident, abuse, misuse, fire, floods, earthquake or other external causes; c) damage
caused by service performed by anyone who is not a representative of Brookstone;
d) accessories used in conjunction with a covered product; e) a product or part
that has been modified to alter functionality or capability; f) items intended to be
periodically replaced by the purchaser during the normal life of the product including,
without limitation, batteries or light bulbs; g) any product sold “as is” including, without
limitation, floor demonstration models and refurbished items; or h) a product that is
used commercially or for a commercial purpose.
BROOKSTONE SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING
OUT OF ANY BREACH OF THIS WARRANTY. TO THE EXTENT PERMITTED BY
APPLICABLE LAW, BROOKSTONE DISCLAIMS ANY AND ALL STATUTORY OR
IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
WARRANTIES AGAINST HIDDEN OR LATENT DEFECTS. IF BROOKSTONE
CANNOT LAWFULLY DISCLAIM STATUTORY OR IMPLIED WARRANTIES, THEN
TO THE EXTENT PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE
LIMITED IN DURATION TO THE DURATION OF THIS EXPRESS WARRANTY.
Some states disallow the exclusion or limitation of incidental or consequential
damages or how long an implied warranty lasts, so the above exclusions or limitations
may not apply to you. This warranty gives you specific legal rights and you may also
have other rights, which vary from state to state.
651463_INS_Dancing Truck V2_5”Wx4.75”H_Output:100%_Prints:1/0 Blk

651463
Merrimack, New Hampshire USA 03054 • 800-846-3000 • www.Brookstone.com