BROSA Smeaton User manual

ASSEMBLY GUIDE
Smeaton Outdoor Dining Bench
v1.0
All manuals and user guides at all-guides.com

Components
Before you get started, check you have all of the pieces below. If anything’s
missing, please visit
www.brosa.com.au/pages/product-return-and-parts-request and we’ll sort it
out right away.
Leg x 2
Middle Rail x 1
Supporting Frame x 1
Bench Top x 1
Hardware
What you need
1
2
3
4
A x 14 B x 14 C x 1
All manuals and user guides at all-guides.com

Step 1 Attach the legs (1) to the middle rail (2). Fit a washer
(B) to a bolt (A) and then insert the bolt into a hole.
Fix the bolt with the Allen key (C) but do not tighten
it yet. Repeat this for the remaining holes.
A x 4
B x 4
C x 1
1
1
2
A
B
C
All manuals and user guides at all-guides.com

Step 2 Align the structure formed in Step 1 with the sup-
porting frame (3) and make sure the bolt holes over-
lap. Fit a washer (B) to a bolt (A) and then insert the
bolt into a hole. Fix the bolt with the Allen key (C)
but do not tighten it yet. Repeat this for the remain-
ing holes.
A x 4
B x 4
C x 1
3
A
B
C
All manuals and user guides at all-guides.com

Step 3 Place the bench top (4) on a level surface with the
underside facing upward. Align the structure formed
in Step 2 with the table top and make sure the holes
on the brackets overlap the holes on the table top.
Fit a washer (B) to a bolt (A) and then insert the bolt
into a hole. Fix the bolt with the Allen key (C) but do
not tighten it yet. Repeat this for the remaining
holes.
A x 6
B x 6
C x 1
A
B
C
4
All manuals and user guides at all-guides.com

Step 4 Tighten all bolts with the Allen key (C).
C x 1
C
C
All manuals and user guides at all-guides.com

Step 5 Place the bench upright on a level surface. Enjoy
your new outdoor dining bench!
All manuals and user guides at all-guides.com