Brother MFC-J6910DW Assembly instructions

ADVANCED
USER’S GUIDE
MFC - J6910DW
Version 0
USA/CAN

i
User's Guides and where do I find it?
Which manual? What's in it? Where is it?
Safety and Legal Read this Guide first. Please read the Safety
Instructions before you set up your machine.
See this Guide for trademarks and legal
limitations.
Printed / In the box
Quick Setup Guide Follow the instructions for setting up your
machine and installing the drivers and software
for the operating system and connection type
you are using.
Printed / In the box
Basic User's Guide Learn the basic Fax, Copy, Scan and
PhotoCapture Center™ operations and how to
replace consumables. See troubleshooting tips.
Printed / In the box
Advanced User's Guide Learn more advanced operations: Fax, Copy,
security features, printing reports and
performing routine maintenance.
PDF file /
Documentation
CD-ROM
Software User's Guide Follow these instructions for Printing, Scanning,
Network Scanning, PhotoCapture Center™,
Remote Setup, PC-Fax, and using the Brother
ControlCenter utility.
PDF file /
Documentation
CD-ROM
Network Glossary This Guide provides basic information about
advanced network features of Brother
machines along with explanations about
general networking and common terms.
PDF file /
Documentation
CD-ROM
Network User's Guide This Guide provides useful information about
wired and wireless network settings and
security settings using the Brother machine.
You can also find supported protocol
information for your machine and detailed
troubleshooting tips.
PDF file /
Documentation
CD-ROM

ii
Table of Contents
1 General setup 1
Memory storage.....................................................................................................1
Volume Settings.....................................................................................................1
Ring Volume ....................................................................................................1
Beeper Volume................................................................................................2
Speaker Volume ..............................................................................................2
Automatic Daylight Saving Time............................................................................3
Sleep Mode ...........................................................................................................3
LCD screen............................................................................................................ 4
Setting the backlight brightness.......................................................................4
Setting the Dim Timer for the backlight ........................................................... 4
Dial Prefix ..............................................................................................................4
Setting up or changing the prefix number........................................................4
Mode Timer............................................................................................................5
2 Security features 6
Secure Function Lock 2.0 ......................................................................................6
Before you begin to use Secure Function Lock 2.0.........................................6
Setting and changing the Administrator Password..........................................7
Setting up restricted users...............................................................................8
Turning Secure Function Lock on/off............................................................... 8
Switching users ...............................................................................................9
Changing to the Public mode ..........................................................................9
3 Sending a fax 10
Additional sending options...................................................................................10
Sending faxes using multiple settings ...........................................................10
Stop faxing..................................................................................................... 10
Contrast ......................................................................................................... 10
Changing fax resolution.................................................................................11
Setting your changes as the new default....................................................... 11
Restoring fax settings to the factory settings................................................. 11
Additional sending operations..............................................................................12
Sending a duplex (2-sided) fax from the ADF ...............................................12
Sending a fax manually .................................................................................12
Sending a fax at the end of a conversation ...................................................13
Dual Access (Black & White only) ................................................................. 13
Broadcasting (Black & White only) ................................................................13
Real Time Transmission................................................................................ 15
Overseas Mode .............................................................................................15
Delayed Faxing (Black & White only) ............................................................15
Delayed Batch Transmission (Black & White only) .......................................16
Checking and canceling waiting jobs............................................................. 16
Polling overview................................................................................................... 17
Polled Transmit (Black & White only) ............................................................17

iii
4 Receiving a fax 18
Memory Receive (Black & White only) ................................................................18
Receiving faxes into memory when paper tray is empty ............................... 18
Fax Forwarding..............................................................................................18
Paging ...........................................................................................................19
Fax Storage ...................................................................................................20
Printing a fax from the memory ..................................................................... 20
PC-Fax Receive (Windows®only).................................................................21
Turning off Memory Receive operations........................................................22
Changing Memory Receive operations .........................................................22
Remote Retrieval ................................................................................................. 23
Setting a Remote Access Code.....................................................................23
Using your Remote Access Code..................................................................23
Remote Fax commands ................................................................................24
Retrieving fax messages ...............................................................................25
Changing your Fax Forwarding number ........................................................25
Additional receiving operations............................................................................26
Printing a reduced incoming fax ....................................................................26
Receiving a fax at the end of a conversation.................................................26
Polling overview...................................................................................................27
Polling receive ...............................................................................................27
5 Dialing and storing numbers 29
Voice operations ..................................................................................................29
Tone or Pulse (Canada only).........................................................................29
Fax/Tel mode.................................................................................................29
Caller ID.........................................................................................................29
Special line considerations ............................................................................ 30
Additional dialing operations................................................................................32
Outgoing Call.................................................................................................32
Caller ID history .............................................................................................32
Dialing access codes and credit card numbers .............................................33
Additional ways to store numbers ........................................................................34
Storing One Touch numbers from Outgoing Calls......................................... 34
Storing One Touch numbers from the Caller ID history.................................34
Storing Speed Dial numbers from Outgoing Calls.........................................35
Storing Speed Dial numbers from the Caller ID history.................................36
Setting up groups for Broadcasting ...............................................................37
6Printingreports 39
Fax reports...........................................................................................................39
Transmission Verification Report...................................................................39
Fax Journal (activity report) ...........................................................................39
Reports ................................................................................................................40
How to print a report ......................................................................................40

iv
7 Making copies 41
Copy settings ....................................................................................................... 41
Stop copying .................................................................................................. 41
Changing copy quality ...................................................................................41
Enlarging or reducing the copied image ........................................................42
Making N in 1 copies or a poster (Page Layout) ........................................... 43
2 in 1 ID Copy................................................................................................ 46
Sorting copies using the ADF ........................................................................46
Adjusting Density ........................................................................................... 47
Ink Save Mode...............................................................................................47
Thin Paper Copy............................................................................................ 48
Skew Adjustment........................................................................................... 48
Book Copy ..................................................................................................... 49
Watermark Copy............................................................................................ 49
Duplex (2-sided) copying ...............................................................................50
Setting your favorites..................................................................................... 53
8 PhotoCapture Center™: Printing photos from a memory card or
USB Flash memory drive 54
PhotoCapture Center™ operations .....................................................................54
Memory cards, USB Flash memory drive and folder structures .................... 54
Movie printing ................................................................................................ 55
Print Images......................................................................................................... 55
Print Index (Thumbnails) ...............................................................................55
Printing Photos .............................................................................................. 56
Enhance Photos ............................................................................................56
DPOF printing................................................................................................ 58
PhotoCapture Center™ print settings.................................................................. 59
Print Quality ................................................................................................... 59
Paper options ................................................................................................59
Adjusting Brightness, Contrast and Color......................................................60
Cropping ........................................................................................................61
Borderless printing......................................................................................... 62
Print Date....................................................................................................... 62
Setting your changes as the new default....................................................... 62
Restoring all settings to the factory settings .................................................. 62
Scan to a memory card or USB Flash memory drive .......................................... 63
Glass Scan Size ............................................................................................ 63
Auto Crop ......................................................................................................63
How to set a new default ...............................................................................64
How to reset to the factory settings ............................................................... 65

v
9 Printing photos from a camera 66
Printing photos directly from a PictBridge camera...............................................66
PictBridge requirements ................................................................................66
Setting your digital camera ............................................................................ 67
Printing Images..............................................................................................68
DPOF printing................................................................................................68
Printing photos directly from a digital camera (without PictBridge)......................69
Printing Images..............................................................................................69
A Routine maintenance 70
Cleaning and checking the machine....................................................................70
Cleaning the outside of the machine .............................................................70
Cleaning the machine’s printer platen ...........................................................71
Cleaning the paper feed rollers .....................................................................72
Cleaning the paper pick-up rollers ................................................................. 73
Cleaning the paper pick-up rollers for paper tray #2 .....................................74
Checking the ink volume ...............................................................................74
Packing and shipping the machine ......................................................................75
B Glossary 77
C Index 81

1
1
1
Memory storage 1
Even if there is a power failure, you will not
lose the settings you have chosen using the
MENU button because they are stored
permanently. Also, you will not lose your
settings in the FAX, SCAN, COPY and
PHOTO CAPTURE mode key menus if you
have chosen Set New Default or
Favorite Settings. You may have to
reset the date and time.
Note
During a power failure the machine will
retain messages that are in the memory
for approximately 24 hours.
Volume Settings 1
Ring Volume 1
You can choose a range of ring volume
levels, from High to Off. The machine will
keep your new default setting until you
change it.
Setting the Ring Volume from the
menu 1
aPress MENU.
bPress aor bto display
General Setup.
cPress General Setup.
dPress aor bto display Volume.
ePress Volume.
fPress Ring.
gPress Low, Med, High or Off.
hPress Stop/Exit.
General setup 1

Chapter 1
2
Beeper Volume 1
When the beeper is on, the machine will beep
when you press a key, make a mistake, or
after you send or receive a fax.
You can choose a range of beeper volume
levels, from High to Off.
aPress MENU.
bPress aor bto display
General Setup.
cPress General Setup.
dPress aor bto display Volume.
ePress Volume.
fPress Beeper.
gPress Low, Med, High or Off.
hPress Stop/Exit.
Speaker Volume 1
You can choose a range of speaker volume
levels, from High to Off.
aPress MENU.
bPress aor bto display
General Setup.
cPress General Setup.
dPress aor bto display Volume.
ePress Volume.
fPress Speaker.
gPress Low, Med, High or Off.
hPress Stop/Exit.
You can also adjust the speaker volume by
pressing Hook.
aPress Hook on the control panel.
bPress dor con the Touchscreen to
display the Volume button.
cPress Volume.
dPress dor con the Touchscreen.
Each button press changes the volume
to the next setting.
ePress Hook on the control panel.

General setup
3
1
Automatic Daylight
Saving Time 1
You can set the machine to change
automatically for daylight saving time. It will
reset itself forward one hour in the Spring and
backward one hour in the Fall. Make sure you
have set the correct date and time in the
Date&Time setting.
The factory setting is Off, so you will have to
turn on Automatic Daylight Saving Time as
follows.
aPress MENU.
bPress aor bto display
General Setup.
cPress General Setup.
dPress aor bto display
Auto Daylight.
ePress Auto Daylight.
fPress On (or Off).
gPress Stop/Exit.
Sleep Mode 1
You can choose how long the machine must
be idle (from 1 to 60 minutes) before it goes
into Sleep Mode. The timer will restart if any
operation is carried out on the machine.
aPress MENU.
bPress aor bto display
General Setup.
cPress General Setup.
dPress aor bto display Sleep Mode.
ePress Sleep Mode.
fPress 1 Min, 2 Mins, 3 Mins,
5 Mins, 10 Mins, 30 Mins or
60 Mins, which is the length of time the
machine is idle before entering sleep
mode.
gPress Stop/Exit.

Chapter 1
4
LCD screen 1
Setting the backlight
brightness 1
You can adjust the brightness of the LCD
backlight. If you are having difficulty reading
the LCD, try changing the brightness setting.
aPress MENU.
bPress aor bto display
General Setup.
cPress General Setup.
dPress aor bto display LCD Settings.
ePress LCD Settings.
fPress Backlight.
gPress Light, Med or Dark.
hPress Stop/Exit.
Setting the Dim Timer for the
backlight 1
You can set how long the LCD backlight stays
on after you go back to the Ready screen.
aPress MENU.
bPress aor bto display
General Setup.
cPress General Setup.
dPress aor bto display LCD Settings.
ePress LCD Settings.
fPress Dim Timer.
gPress 10 Secs, 20 Secs, 30 Secs or
Off.
hPress Stop/Exit.
Dial Prefix 1
The Dial Prefix setting will automatically dial a
predefined number before every fax number
you dial. For example, if your telephone
system requires you to dial 9 before dialing an
outside number use this setting to
automatically dial 9 for every fax you send.
Setting up or changing the
prefix number 1
aPress MENU.
bPress aor bto display
Initial Setup.
cPress Initial Setup.
dPress aor bto display Dial Prefix.
ePress Dial Prefix.
fPress On (or Off).
gPress Dial Prefix.
hEnter the prefix number (up to 5 digits)
by pressing the buttons on the
Touchscreen.
iPress OK.
Note
• If your telephone system requires a timed
break recall (hookflash), press !to enter
the break.
• You cannot use ! with any other numbers
or characters.
• (Canada only) If the pulse dialing mode is
on, # and lare not available to use.
jPress Stop/Exit.

General setup
5
1
Mode Timer 1
The machine has four temporary mode keys
on the control panel: FAX, SCAN, COPY and
PHOTO CAPTURE. You can change the
amount of time the machine takes after the
last Scan, Copy or PhotoCapture operation
before it returns to FAX mode. If you choose
Off, the machine stays in the mode you used
last.
aPress MENU.
bPress aor bto display
General Setup.
cPress General Setup.
dPress aor bto display Mode Timer.
ePress Mode Timer.
fPress 0 Sec, 30 Secs, 1 Min,
2 Mins, 5 Mins or Off.
gPress Stop/Exit.

6
2
Secure Function Lock
2.0 2
Secure Function Lock lets you restrict public
access to certain machine functions:
Fax Tx (Fax Transmit)
Fax Rx (Fax Receive)
Copy
Scan
PCC
PC Print
Color Print
Page Limit
This feature also prevents users from
changing the default settings of the machine
by limiting access to the menu settings.
Before using the security features, you must
first enter an administrator password.
Access to restricted operations can be
enabled by creating a restricted user.
Restricted users must enter a user password
to use the machine.
Make a careful note of your password. If you
forget it, please call Brother Customer
Service.
Note
• Only administrators can set limitations
and make changes for each user.
• If Fax Tx is disabled, you cannot use any
functions in the Fax menu.
• Polling Receive is enabled only when both
Fax Tx and Fax Rx are enabled.
Before you begin to use
Secure Function Lock 2.0 2
You can configure Secure Function Lock 2.0
settings using a Web browser. Before
configuration, following preparations are
needed.
aStart your Web browser.
bType “http://machine’s IP
address/” into your browser’s address
bar (where “machine’s IP address”
is the machine’s IP address).
For example:
http://192.168.1.2/
Note
You can find the machine's IP address in
the Network Configuration List. (See
Printing the Network Configuration List in
the Network User’s Guide.)
cEnter a password in the Login box.
(This is a password to log into the
machine's Web page, not the
administrator password for Secure
Function Lock.) Click .
Security features 2

Security features
7
2
Note
If you are using a Web browser to
configure the machine's setting for the first
time, set a password.
1Click
Please configure the password.
2Enter a password you want to use
(up to 32 characters).
3Re-enter the password in
Confirm new password box.
4Click Submit.
Setting and changing the
Administrator Password 2
You can configure these settings using a
Web browser. To set up the Web page, see
Before you begin to use Secure Function
Lock 2.0 on page 6. Then follow the
instructions below.
Setting the administrator password 2
The password you set in these steps is for the
administrator. This password is used to set
up users and to turn Secure Function Lock on
or off. (See Setting up restricted users
on page 8 and Turning Secure Function Lock
on/off on page 8.)
aClick Administrator.
bClick Secure Function Lock.
cEnter a four-digit number for the
password in the New Password box.
dRe-enter the password in the
Retype Password box.
eClick Submit.
Changing the administrator password2
aClick Administrator.
bClick Secure Function Lock.
cEnter a four-digit number for the new
password in the New Password box.
dRe-enter the new password in the
Retype Password box.
eClick Submit.

Chapter 2
8
Setting up restricted users 2
You can set up users with restrictions and a
password. You can set up to 10 restricted
users.
You can configure these settings using a
Web browser.
To set up the Web page, see Before you
begin to use Secure Function Lock 2.0
on page 6. Then follow the instructions
below.
aClick Administrator.
bClick Secure Function Lock.
cEnter an alphanumeric Group name or
User name (up to 15 characters) in the
ID Number/Name box and then enter a
four-digit password in the PIN box.
dUncheck the functions that you want to
restrict in the Print box or the Others
box. If you want to configure the
maximum page count, check the On box
in Page Limit, and then enter the
number in the Max. box. Then click
Submit.
Note
• You cannot use the same password as
another user’s password.
• You can set up one Public user. Public
users do not need to enter a password.
For more information, see the Network
User's Guide.
Turning Secure Function
Lock on/off 2
Note
Make a careful note of the administrator
password. If you enter the wrong
password, the LCD will show
Wrong Password. Enter the correct
password. If you forget it, please call
Brother Customer Service.
Turning Secure Function Lock on 2
aPress MENU.
bPress General Setup.
cPress aor bto display
Function Lock.
dPress Function Lock.
ePress Lock OffiOn.
fEnter your four-digit administrator
password by pressing the buttons on the
Touchscreen.
Press OK.
Turning Secure Function Lock off 2
aPress .
bPress Lock OniOff.
cEnter your four-digit administrator
password by pressing the buttons on the
Touchscreen.
Press OK.
Pub l i c

Security features
9
2
Switching users 2
This setting allows a restricted user to log on
the machine when Secure Function Lock is
turned on.
aHold down Shift as you press l.
Or, on the Touchscreen, press
or
(where xxxxx is the user’s name). Then
press Change User.
bPress aor bto display your user name.
cPress your user name.
dEnter your four-digit user password by
pressing the buttons on the
Touchscreen.
Press OK.
Changing to the Public mode 2
aPress (where xxxxx is
the user’s name).
bPress Go to Public.
Note
After a restricted user has finished using
the machine, it will return to the Public
setting within the same time as the Mode
Timer setting. (See Mode Timer
on page 5.)
Pub l i c xxxxx
xxxxx

10
3
Additional sending
options 3
Sending faxes using multiple
settings 3
When you send a fax you can choose a
combination of settings, such as
Fax Resolution, Contrast,
Duplex Fax, Glass Scan Size,
Real Time TX, and Preview.
You can also choose: Call History,
Phone Book, Broadcasting,
Delayed Fax, Batch TX, Polled TX,
Polling RX, Overseas Mode,
Set New Default, and Factory Reset.
Some settings are only available when
sending black & white faxes.
aPress (FAX).
The LCD shows:
bPress dor cto display a setting you
want to change. When the setting is
displayed, press it.
cPress an option.
dRepeat steps bto cto change more
settings.
Note
• Most settings are temporary and the
machine returns to its default settings after
you send a fax.
• You can save some of the settings you
use most often by setting them as the
default. These settings will stay until you
change them again. (See Setting your
changes as the new default on page 11.)
Stop faxing 3
To stop faxing, press Stop/Exit.
Contrast 3
If your document is very light or very dark, you
may want to change the contrast. For most
documents the factory setting Auto can be
used. It automatically chooses the suitable
contrast for your document.
Choose Light when sending a light
document. Choose Dark when sending a
dark document.
aPress (FAX).
bPress dor cto display Contrast.
cPress Contrast.
dPress Auto, Light or Dark.
Note
Even if you choose Light or Dark, the
machine will send the fax using the Auto
setting in any of the following conditions:
• When you send a color fax.
• When you choose Photo as the Fax
Resolution.
Sending a fax 3

Sending a fax
11
3
Changing fax resolution 3
The quality of a fax can be improved by
changing the fax resolution.
aPress (FAX).
bPress dor cto display
Fax Resolution.
cPress Fax Resolution.
dPress the resolution you want.
Note
You can choose four different resolution
settings for black & white faxes and two for
color faxes.
If you choose S.Fine or Photo and then
use the Color Start key to send a fax, the
machine will send the fax using the Fine
setting.
Setting your changes as the
new default 3
You can save the fax settings for
Fax Resolution, Contrast,
Glass Scan Size, Preview and
Real Time TX you use most often by
setting them as default. These settings will
stay until you change them again.
aPress (FAX).
bPress dor cto choose the setting you
want to change, and then press your
new option.
Repeat this step for each setting you
want to change.
cAfter changing the last setting, press
dor cto display Set New Default.
dPress Set New Default.
ePress Yes.
fPress Stop/Exit.
Restoring fax settings to the
factory settings 3
You can restore all the fax settings you have
changed to the factory settings. These
settings will stay until you change them again.
aPress (FAX).
bPress dor cto display
Factory Reset.
cPress Factory Reset.
dPress Yes.
ePress Stop/Exit.
Black & White
Standard Suitable for most typed
documents.
Fine Good for small print and
transmits a little slower than
Standard resolution.
S.Fine Good for small print or artwork
and transmits slower than Fine
resolution.
Photo Use when the document has
varying shades of gray or is a
photograph. Photo has the
slowest transmission.
Color
Standard Suitable for most typed
documents.
Fine Use when the document is a
photograph. The transmission
time is slower than Standard
resolution.

Chapter 3
12
Additional sending
operations 3
Sending a duplex (2-sided) fax
from the ADF 3
You can send 2-sided documents up to Legal
size from the ADF.
aPress Duplex on the machine’s control
panel.
bLoad your document in the ADF.
cPress Fax.
dDo one of the following:
If your document is flipped on the
Long edge, press
DuplexScan :LongEdge.
If your document is flipped on the
Short edge, press
DuplexScan :ShortEdge.
eEnter the fax number.
fPress Black Start or Color Start.
The machine will now scan and send your
document.
Sending a fax manually 3
Manual transmission lets you hear the
dialing, ringing and fax-receiving tones while
sending a fax.
Note
To send a multiple page fax, use the ADF.
aPress (FAX).
bLoad your document.
cTo listen for a dial tone, press Hook or
pick up the handset of the external
telephone.
dDial the fax number.
Note
If your network supports the LDAP
protocol you can search for fax numbers
and E-mail addresses on your server.
(See LDAP operation in the Network
User’s Guide.)
eWhen you hear the fax tone, press
Black Start or Color Start.
If you are using the scanner glass, press
Send on the Touchscreen to send the
fax.
If you pressed Color Start, go to
step f.
fIf you picked up the handset of an
external telephone, replace it.
Long edge
Portrait Landscape
Short edge
Portrait Landscape

Sending a fax
13
3
Sending a fax at the end of a
conversation 3
At the end of a conversation, you can send a
fax to the other party before you both hang
up.
aAsk the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
bPress (FAX).
cLoad your document.
dPress Black Start or Color Start.
If you are using the scanner glass,
press Send to send the fax.
eReplace the handset of the external
phone.
Dual Access
(Black & White only) 3
You can dial a number and start scanning the
fax into memory—even when the machine is
sending from memory, receiving faxes or
printing PC data. The LCD shows the new job
number and available memory.
The number of pages you can scan into the
memory will vary depending on the data that
is printed on them.
Note
If the Out of Memory message appears
while scanning a document, press
Stop/Exit to cancel or Black Start to send
the scanned pages.
Broadcasting
(Black & White only) 3
Broadcasting is when the same fax message
is automatically sent to more than one fax
number. You can include Groups, One Touch
numbers, Speed Dial numbers, and up to 50
manually dialed numbers in the same
broadcast.
After the broadcast is finished, a Broadcast
Report will be printed.
Before you begin the broadcast 3
One Touch and Speed Dial numbers must be
stored in the machine's memory before they
can be used in a broadcast. (See Storing One
Touch Dial numbers and Storing Speed Dial
numbers in chapter 7 of the Basic User's
Guide.)
Group numbers must also be stored in the
machine's memory before they can be used
in a broadcast. Group numbers include many
stored One Touch Dial and Speed Dial
numbers for easier dialing. (See Setting up
groups for Broadcasting on page 37.)
How to broadcast a fax 3
aPress (FAX).
bLoad your document.
cPress dor cto display Broadcasting.
dPress Broadcasting.
eYou can add numbers to the broadcast
in the following ways:
Press Add Number and enter a
number by pressing the buttons on
the Touchscreen.
Press OK.

Chapter 3
14
Note
If you downloaded Internet Fax:
If you want to broadcast using an E-mail
address, press , enter the E-mail
address, and press OK. (See Entering
Text in appendix C of the Basic User's
Guide.)
Press Phone Book.
Press to search by
Alphabetical Order or
Numerical Order. Press the locations
where you want to send a fax.
Press OK.
Note
If you chose Numerical Order:
One Touch Dial locations begin with l.
Speed Dial locations begin with #.
fAfter you have entered all the fax
numbers by repeating step e, press OK.
gPress Black Start.
Faxing from the ADF
The machine starts scanning and
sending the document.
Faxing from the scanner glass
When the LCD asks you Next Page?,
do one of the following:
To send a single page, press No (or
press Black Start again).
The machine starts sending the
document.
To send more than one page, press
Yes and place the next page on the
scanner glass.
Press Black Start.
The machine starts scanning the
page. (Repeat this step for each
additional page.)
Note
• If you did not use up any of the numbers
for Groups, you can broadcast faxes to as
many as 266 different numbers.
• The machine’s available memory will vary
depending on the types of jobs in the
memory and the number of locations used
for broadcasting. If you broadcast to the
maximum number available, you will not
be able to use dual access and delayed
fax.
• If the Out of Memory message
appears, press Stop/Exit to stop the job.
If more than one page has been scanned,
press Black Start to send the portion that
is in the machine’s memory.
Canceling a Broadcast in progress 3
aPress Stop/Exit.
bDo one of the following:
To cancel the entire broadcast, press
Entire Broadcast. Go to step c.
To cancel the current job, press the
button that displays the number
being dialed. Go to step d.
To exit without canceling, press
Stop/Exit.
cWhen the LCD asks if you want to
cancel the entire broadcast, do one of
the following:
Press Yes to confirm.
To exit without canceling, press No
or Stop/Exit.
dDo one of the following:
To cancel the current job, press Yes.
To exit without canceling, press No
or Stop/Exit.