Brother MFC-8670DN User manual

Before you can use the machine, you must set up the hardware and install the software.
Please read this “Quick Setup Guide” for the correct setup procedure and installation
instructions.
Keep this “Quick Setup Guide”, User’s Guide and supplied CD-ROM in a convenient place for
quick and easy reference at all times.
Step 1
Setting Up the machine
Step 2
Installing the Drivers & Software
Setup is Complete!
Installing the Drivers & Software
Setting Up
the machine
Windows®
USB
Windows®
Parallel
Windows NT
®
4.0
Parallel
Macintosh®
USB
Macintosh®
Network
Windows®
Network
Network
Administrators
MFC-8670DN
Quick Setup Guide
Version 0

Warning Caution Improper Setup Note User’s Guide
Warnings tell you
what to do to prevent
possible personal
injury.
Cautions specify
procedures you
must follow or avoid
to prevent possible
damage to the
machine or other
objects.
Improper Setup
icons alert you to
devices and
operations that are
not compatible with
the machine.
Notes tell you how
you should respond
to a situation that
may arise or give
tips about how the
current operation
works with other
features.
Indicates reference
to the User’s Guide.

1
Carton components may differ from one country to another.
Save all packing materials and the carton in case for any reason you must ship your machine.
Carton Components
Quick Setup Guide
CD-ROMs
One CD-ROM for Windows
®
and Macintosh
®
One CD-ROM for
Windows Vista
®
User’s Guide
Drum Unit Assembly
(including Toner Cartridge)
AC Power Cord Telephone Line Cord
USB Cable Product Registration and
Test Sheet
(USA only)
Accessory Order Form
The USB interface cable is a standard accessory. Please purchase the appropriate interface cable if you
intend to use the Parallel or Network interface.
Do NOT connect the interface cable at this time. Connecting the interface cable is done during the
software installation process.
■USB interface cable
Please make sure you use a USB 2.0 interface cable that is no longer than 6 feet (2.0 meters).
When you use a USB cable, make sure you connect it to the USB port of your computer and not to a
USB port on a keyboard or non-powered USB hub.
■Parallel interface cable
Please make sure you use a Parallel interface cable that is no longer than 6 feet (2.0 meters).
Use a shielded interface cable that is IEEE 1284-compliant.
■Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T or 100Base-TX Fast
Ethernet Network.
1. Automatic Document Feeder (ADF)
2. Control Panel
3. Face-down Output Tray
Support Flap (Support Flap)
4. Front Cover
5. Paper Tray
6. Power Switch
7. Document Cover
8. ADF Document Output Support
Flap
1
6
2
3
4
5
8
7
■Getting Started

2
MFC-8670DN
Control Panel
1One Touch keys 2Status LED 3LCD (Liquid Crystal Display)
4Menu keys 5Dial Pad 6Stop/Exit key
7Start key 8Copy keys 9Mode keys
10 Fax and telephone keys 11 Print keys
For the details of the control panel, see “Control panel overview” in Chapter 1 of the User’s Guide.
When you move the machine, grasp the side handholds that are under the scanner. Do NOT carry the
machine by holding it at the bottom.
981011
12 345
6
7

3
Table of Contents
Setting Up the machine
1. Install the Drum Unit and Toner Cartridge Assembly .................................... 4
2. Load Paper in the Paper Tray ..........................................................................5
3. Release the Scanner Lock ................................................................................6
4. Install the Power Cord and Phone Line ..........................................................6
5. Setting the Date and Time ................................................................................8
6. Setting Automatic daylight saving time ..........................................................8
7. Setting your Station ID .....................................................................................9
8. Choosing the correct Receive Mode .............................................................10
9. Tone and Pulse dialing mode (Canada only) ................................................11
10. Selecting Your Language (Canada only) ......................................................11
11. Setting the LCD Contrast ...............................................................................11
12. Sending in the Product Registration and Test Sheet (USA Only) ..............11
Installing the Drivers & Software
Supplied CD-ROM “MFL-Pro Suite” ..............................................................................12
For USB Interface Cable Users
(For Windows
®
98/98SE/Me/2000 Professional/XP/XP Professional x64 Edition/Windows Vista
®
) 14
For Parallel Interface Cable Users
(For Windows®98/98SE/Me/2000 Professional/XP/XP Professional x64 Edition) ..17
For Windows NT®Workstation Version 4.0 Users ......................................................20
For Network Interface Cable Users
( For Windows
®
98/98SE/Me/NT/2000 Professional/XP/XP Professional x64 Edition/Windows Vista
®
) ...22
For USB Interface Cable Users ......................................................................................27
■For Mac OS®9.1 to 9.2 ......................................................................................27
■For Mac OS®X 10.2.4 or greater .......................................................................29
For Network Interface Cable Users ...............................................................................33
■For Mac OS®9.1 to 9.2 ......................................................................................33
■For Mac OS®X 10.2.4 or greater .......................................................................35
■For Network Users and Administrators
BRAdmin Professional configuration utility
(For Windows
®
98/98SE/Me/2000 Professional/XP/XP Professional x64 Editon Users) .40
BRAdmin Light configuration utility (For Windows Vista®users) ............................. 42
BRAdmin Light configuration utility (For Mac OS®X users) ......................................43
■Options and Consumables
Options ............................................................................................................................ 44
Replacement Consumables ...........................................................................................44
Step 1
Step 2

4
Setting Up the machine
Do NOT connect the interface cable.
Connecting the interface cable is
done during the software
installation process.
1Open the front cover by pressing the front
cover release button (1).
2Unpack the drum unit and toner cartridge
assembly.
3Gently rock the drum assembly from side to
side several times to distribute the toner
evenly inside the assembly.
4Put the drum unit assembly into the
machine until it clicks into place.
5Close the front cover of the machine.
1Install the Drum Unit and Toner Cartridge Assembly
(1)
Step 1

5
Setting Up
the machine
Windows®
USB
Windows®
Parallel
Windows NT
®
4.0
Parallel
Macintosh®
USB
Macintosh®
Network
Windows®
Network
Network
Administrators
1Pull the paper tray completely out of the
machine.
2While pressing the paper guide release
lever (1), slide the adjusters to fit the paper
size. Check that the guides are firmly in the
slots.
3Fan the stack of paper well to avoid paper
jams and misfeeds.
4Put paper in the paper tray.
Check that the paper is flat in the tray and
below the maximum paper mark (1).
5Put the paper tray firmly back into the
machine and unfold the output tray support
flap (1) before you use the machine.
2Load Paper in the Paper Tray
For Legal size paper, press the lever (1)
located at the back of the tray and pull out the
back of the paper tray. Move the tray lock
button (2) to the lock position.
(1)
(1) (2)
For details on supported paper
specifications, see “Acceptable paper and
other media” in Chapter 2 of the User’s
Guide.
(1)
(1)

6
1Push the lever (1) up to unlock the scanner.
(The gray scanner lock lever is located at
the back left side, under the document cover
(2).)
Do not connect the Parallel or USB
cable yet.
1Make sure that the power switch is off.
Connect the AC power cord to the machine.
2Plug the AC power cord into an AC outlet.
Turn the power switch on.
3Connect one end of the telephone line cord
to the jack on the machine marked LINE
and the other end to a modular wall jack.
3Release the Scanner
Lock
(2)
(1)
4Install the Power Cord
and Phone Line
If Scanner Locked appears on the LCD,
immediately release the scanner lock and
press Stop/Exit.
Step 1 Setting Up the machine

7
Setting Up
the machine
Windows®
USB
Windows®
Parallel
Windows NT
®
4.0
Parallel
Macintosh®
USB
Macintosh®
Network
Windows®
Network
Network
Administrators
Warning
■ The machine must be grounded using a 3-prong
plug.
■ Since the machine is grounded through the power
outlet, you can protect yourself from potentially
hazardous electrical conditions on the telephone
network by keeping the power cord connected to
your machine when you connect it to a telephone
line. Similarly, you can protect yourself when you
want to move your machine by disconnecting the
telephone line first and then the power cord.
If you are sharing one phone line with an
external telephone, connect it as shown
below.
If you are sharing one phone line with an
external telephone answering device,
connect it as shown below.
Please set the receive mode to
External TAD .
For more details, see “Choosing the correct
Receive Mode” on page 10 and “Connecting
an external TAD (Telephone Answering
Device)” in Chapter 7 of the User’s Guide.
Extension
Telephone
External
Telephone
TAD
TAD

8
The machine displays the date and time, and prints it
on every fax you send.
1Press Menu.
2Press 0.
3Press 2.
4Enter the last two digits of the year on the
dial pad, and then press OK.
(e.g. Enter 0, 8for 2008.)
5Enter the two digits for the month on the dial
pad, and then press OK.
(e.g. Enter 0, 3for March.)
6Enter the two digits for the day on the dial
pad, and then press OK.
(e.g. Enter 2, 5.)
7Enter the time in 24-hour format on the dial
pad, and then press OK.
(e.g. Enter 1, 5, 2, 5for 3:25 P.M.)
8Press Stop/Exit.
You can set the machine to change automatically for
Daylight Saving Time.
It will set itself forward one hour in the Spring, and
back one hour in the Fall.
1Press Menu, 1, 5.
2Press or to select On, or Off.
Press OK.
3Press Stop/Exit.
5Setting the Date and
Time
02.Date/Time
Year:2008
Enter & OK Key
02.Date/Time
XX/XX/2008
Month:03
Enter & OK Key
02.Date/Time
03/XX/2008
Day:25
Enter & OK Key
02.Date/Time
03/25/2008
Time:15:25
Enter & OK Key
If you make a mistake, press Stop/Exit to
start from Step
1 .
6Setting Automatic
daylight saving time
15.Auto Daylight
SOn
TOff
Select ST and OK
Step 1 Setting Up the machine

9
Setting Up
the machine
Windows®
USB
Windows®
Parallel
Windows NT
®
4.0
Parallel
Macintosh®
USB
Macintosh®
Network
Windows®
Network
Network
Administrators
You should store your name and fax number to be printed on all fax pages that you send.
1Press Menu.
2Press 0.
3Press 3.
4Enter your fax number (up to 20 digits) on
the dial pad, and then press OK.
5Enter your telephone number (up to 20
digits) on the dial pad, and then press OK.
(If your telephone number and fax number
are the same, enter the same number
again.)
6Use the dial pad to enter your name (up to
20 characters), and then press OK.
7Press Stop/Exit.
7Setting your Station ID
03.Station ID
Fax:_
Enter & OK Key
03.Station ID
Fax:908XXXXXXXX
Tel:_
Enter & OK Key
03.Station ID
Fax:908XXXXXXXX
Tel:908XXXXXXXX
Name:_
Enter & OK Key
■ Refer to the following chart for entering
your name.
■ If you need to enter a character that is on
the same key as the previous character,
press to move the cursor to the right.
■ If you entered a letter incorrectly and want
to change it, press to move the cursor
under the incorrect character, press
Clear/Back.
Press
key
One
time
Two
times
Three
times
Four
times
2ABC2
3DEF3
4GH I 4
5JKL5
6MNO6
7PQRS
8TUV8
9WX Y Z
For more details, see “Entering Text” in
Chapter D of the User’s Guide.
NOTICE (For USA)
The Telephone Consumer Protection Act of 1991
makes it unlawful for any person to use a computer
or electronic device to send any message via a
telephone fax machine unless such messages
clearly contain, in a margin at the top or bottom of
each transmitted page, or on the first page of the
transmission, the date and time it is sent and an
identification of the business or other entity or other
individual sending the message and the telephone
number of the sending machine or such business,
other entity or individual.
To program this information into your machine, see
Setting the Date and Time on page 8 and Setting
your Station ID
on page 9.

10
The correct Receive mode is determined by the external devices and telephone subscriber services (Voicemail,
Distinctive Ring, etc.) you have (or will be using) on the same line as the Brother machine.
1Press Menu.
2Press 0.
3Press 1.
4Press or to select the mode.
Press OK.
5Press Stop/Exit.
8Choosing the correct Receive Mode
Will you be using a Distinctive Ring number for receiving faxes?
Brother uses the term "Distinctive Ring" but other telephone companies have other names for this service such
as Custom Ringing, RingMaster, Personalized Ring, Teen Ring, Ident-A-Call, and Smart Ring. See Distinctive
Ring in Chapter 7 of the User's Guide for instruction on setting up your machine using this feature.
Will you be using Voicemail on the same telephone line as your Brother machine?
If you have Voicemail on the same telephone line as your Brother machine, there is a strong possibility that Voice
mail and the Brother machine will conflict with each other when receiving incoming calls. See Voice Mail in
Chapter 7 of the User's Guide for instructions on setting up your machine using this service.
Will you be using a Telephone Answering Device on the same telephone line as your
Brother machine?
Your external telephone answering device (TAD) will automatically answer every call. Voice messages are
stored on the external TAD and fax messages are printed. Choose External TAD as your receive mode. See
the instructions on the next page.
Will you be using your Brother machine on a dedicated fax line?
Your machine automatically answers every call as a fax. Choose Fax Only as your receive mode. See the
instructions on the next page.
Will you be using your Brother machine on the same line as your telephone?
Do you want to receive voice calls and faxes automatically
The Fax/Tel receive mode is used when sharing the Brother machine and your telephone on the same line. Choose Fax/
Tel as your receive mode. See the instructions on the next page.
Important Note: You can not receive voice messages on either Voicemail or an answering machine when choosing the Fax/
Tel mode.
Do you expect to receive very few faxes?
Choose Manual as your receive mode. You control the phone line and must answer every call yourself. See the instructions
on the next page.
For more details, see “Receiving a fax” in Chapter 6 of the User’s Guide.
Step 1 Setting Up the machine

11
Setting Up
the machine
Windows®
USB
Windows®
Parallel
Windows NT
®
4.0
Parallel
Macintosh®
USB
Macintosh®
Network
Windows®
Network
Network
Administrators
Your machine comes set for Tone dialing service. If
you have Pulse dialing service (rotary), you need to
change the dialing mode.
1Press Menu.
2Press 0.
3Press 4.
4Press or to select Pulse (or Tone).
Press OK.
5Press Stop/Exit.
1Press Menu.
2Press 0.
3Press 0.
4Select your language (English or French)
by using or , and then press OK.
5Press Stop/Exit.
You can change the contrast to help the LCD look
lighter or darker.
1Press Menu.
2Press 1.
3Press 8.
4Press to increase the contrast.
—OR—
Press to decrease the contrast.
Press OK.
5Press Stop/Exit.
1Fill out the Product Registration and Test
Sheet.
2Place the sheet face up in the Automatic
Document Feeder.
3Enter the toll-free fax number:
1-877-268-9575.
4Press Start.
9Tone and Pulse dialing
mode (Canada only)
10 Selecting Your
Language (Canada only)
11 Setting the LCD Contrast
12
Sending in the Product
Registration and Test
Sheet (USA Only)
Make sure (Fax) is illuminated in Blue.
■ You will receive a confirmation fax of your
Product Registration.
■ You can also register your product online
using the On-Line Registration link from
the installation CD-ROM or go to
http://www.brother.com/registration
Go to the next page to
install the drivers & software

12
Installing the Drivers & Software
The CD-ROM includes the following items:
Install MFL-Pro Suite
You can install the MFL-Pro Suite and multifunction
drivers.
Install Optional Applications
(Install Other Drivers or Utilities)
You can install additional MFL-Pro Suite software
utilities.
Documentation (User’s Guide)
View the User’s Guide and other document in PDF
format (Viewer included). The User’s Guide on the
CD-ROM includes the Software and Network User’s
Guide for features available when connected to a
computer (e.g. Printing, Scanning and networking
details).
On-Line Registration
You will be pointed to the Brother Product Registration
Web page for quick registration of your machine.
Brother Support
View contact information for Brother Customer Service
and how to locate a Brother Authorized Service Center.
Repair MFL-Pro Suite
(For USB and Parallel cable users only)
If you experience errors while installing the MFL-Pro
Suite, you can use this function to automatically repair
and re-install the software.
Start Here OS 9.1-9.2
You can install the printer driver, scanner driver and
Presto!®PageManager®for Mac OS®9.1 - 9.2.
Start Here OSX
You can install the MFL-Pro Suite that includes the
printer driver, scanner driver and the Brother
ControlCenter2 for Mac OS®10.2.4 or greater. You
can also install Presto!®PageManager®to add OCR
capability to the Brother ControlCenter2 and easily
scan, share and organize photos and documents.
Readme.html
You can get important information and
troubleshooting tips.
Documentation
View the User’s Guide and other document in PDF
format (Viewer included). The User’s Guide on the
CD-ROM includes the Software and Network User’s
Guide for features available when connected to a
computer (e.g. Printing, Scanning and networking
details).
Brother Solutions Center
You can access the Brother Solutions Center, a Web
site offering information about your Brother product
including FAQs, User’s Guides, Driver updates and
Tips for using your machine.
On-Line Registration
You will be pointed to the Brother Product Registration
Web Page for quick registration of your machine.
Supplied CD-ROM “MFL-Pro Suite”
Before installing the driver and software, please make sure that the supplied CD-ROM you are using
matches your operation system.
For Windows Vista®use the supplied CD-ROM labeled Windows Vista®.
MFL-Pro Suite includes Printer Driver,
Scanner Driver, ScanSoft
®
PaperPort
®
SE
with OCR, Brother ControlCenter2 and
True Type
®
fonts.
PaperPort
®
SE is a document management
application for viewing scanned documents.
Step 2

13
Setting Up
the machine
Windows®
USB
Windows®
Parallel
Windows NT
®
4.0
Parallel
Macintosh®
USB
Macintosh®
Network
Windows®
Network
Network
Administrators
Installing the Drivers & Software
Follow the instructions on this page for your operating system and interface cable.
For the latest drivers and to find the best solution for your problem or question, access the Brother Solutions
Center directly from the driver or go to http://solutions.brother.com
USB Interface Cable Users .......................................... Go to page 14
(For Windows
®
98/98SE/Me/2000 Professional/XP/XP Professional x64 Edition/Windows Vista
®
)
Parallel Interface Cable Users ..................................... Go to page 17
(For Windows
®
98/98SE/Me/2000 Professional/XP/XP Professional x64 Edition )
Windows NT®Workstation Version 4.0 Users........... Go to page 20
(For Parallel Interface Cable Users)
Network Interface Cable Users
■For Mac OS®9.1 to 9.2 ............................................. Go to page 33
■For Mac OS®X 10.2.4 or greater ............................. Go to page 35
Network Interface Cable Users.................................... Go to page 22
(For Windows
®
98/98SE/Me/NT/2000 Professional/XP/XP Professional x64 Edition/Windows Vista
®
)
USB Interface Cable Users
■For Mac OS®9.1 to 9.2 ............................................. Go to page 27
■For Mac OS®X 10.2.4 or greater ............................. Go to page 29
For Network Users and Administrators...................... Go to page 40
Step 2

14
Make sure that you have finished the instructions from Step 1 “Setting Up
the machine” on pages 4 through 11.
1Turn off and unplug the machine from the
AC outlet and disconnect it from your
computer, if you already connected an
interface cable.
2Turn on your computer.
(For Windows®2000 Professional/XP/
XP Professional x64 Edition/Windows
Vista®, you must be logged on with
Administrator rights.)
3Put the supplied CD-ROM into your
CD-ROM drive. If the model name screen
appears, choose your machine. If the
language screen appears, choose your
language.
4The CD-ROM main menu will appear.
Click Install MFL-Pro Suite.
5After reading and accepting the ScanSoft®
PaperPort®SE License Agreement, click
Yes.
The installation of PaperPort®SE will
automatically start and is followed by the
installation of MFL-Pro Suite.
6When the Brother MFL-Pro Suite Software
License Agreement window appears, click
Yes if you agree to the Software Licence
Agreement.
For USB Interface Cable Users
(For Windows
®
98/98SE/Me/2000 Professional/XP/XP Professional x64 Edition/Windows Vista
®
)
Please close any applications running before
installing the MFL-Pro Suite.
Make sure that the supplied CD-ROM you are
using matches your operating system.
For Windows Vista®use the supplied
CD-ROM labeled Windows Vista®.
■ If this window does not appear, use
Windows®Explorer to run the setup.exe*
program from the root folder of the Brother
CD-ROM.
* start.exe for Windows Vista®
■ For Windows Vista®, when the User
Account Control screen appears, click
Allow.
Step 2 Installing the Drivers & Software

15
7Choose Local Connection, and then click
Next. The installation will continue.
8When this screen appears, connect the
USB interface cable to your PC, and then
connect it to the machine.
(For Windows® XP/XP Professional x64 Edition/
Windows Vista®)
(For Windows®98/98SE/Me/2000)
DO NOT connect the machine to a
USB port on a keyboard or a non-
powered USB hub. Brother
recommends that you connect the
machine directly to your computer.
9Plug in the power cord and turn on the
machine.
It will take a few seconds for the installation
screens to appear.
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another. Please wait, it will
take a few seconds for all the screens to
appear.
DO NOT try to cancel any of the
screens during this installation.
■ For Windows Vista®, when this screen
appears, click the check box and click
Install.
■ If you want to install the PS driver (Brother’s
BR-Script Driver), choose Custom Install
and then follow the on-screen instructions.
When the Select Components* screen
appears, check PS Printer Driver, and
then continue following the on-screen
instructions.
* Select Features for Windows Vista®
Continued ..
Installing the Drivers & Software
Setting Up
the machine
Windows®
USB
Network
Administrators

16
0When the On-Line Registration screen is
displayed, make your selection and follow
the on-screen instructions. Once you have
completed the registration process, close
your web browser to return to this window.
Then click Next.
AClick Finish to restart your computer.
(After restarting the computer, for
Windows®2000 Professional/XP/
XP Professional x64 Edition/
Windows Vista®, you must be logged on
with Administrator rights.)
The MFL-Pro Suite (including, Printer
driver and Scanner driver) has been
installed and the installation is now
complete.
For USB Interface Cable Users
(For Windows
®
98/98SE/Me/2000 Professional/XP/XP Professional x64 Edition/Windows Vista
®
)
After restarting the computer, the Installation
Diagnostics will run automatically. If the
installation is unsuccessful, the installation
results window will be shown. If the
Installation Diagnostics shows a failure,
please follow the on-screen instruction or read
on-line help and FAQs in
Start/All Programs (Programs)/Brother/
MFL-Pro Suite MFC-XXXX (where XXXX is
your model name).
Step 2 Installing the Drivers & Software

17
Make sure that you have finished the instructions from Step 1 “Setting Up
the machine” on pages 4 through 11.
1Turn off and unplug the machine from the
AC outlet and disconnect it from your
computer, if you already connected an
interface cable.
2Turn on your computer.
(For Windows®2000 Professional/XP/
XP Professional x64 Edition, you must be
logged on with Administrator rights.)
3Put the supplied CD-ROM into your
CD-ROM drive. If the model name screen
appears, choose your machine. If the
language screen appears, choose your
language.
4The CD-ROM main menu will appear.
Click Install MFL-Pro Suite.
5After reading and accepting the ScanSoft®
PaperPort®SE License Agreement, click
Yes.
The installation of PaperPort®SE will
automatically start and is followed by the
installation of MFL-Pro Suite.
6When the Brother MFL-Pro Suite Software
License Agreement window appears, click
Yes if you agree to the Software License
Agreement.
For Parallel Interface Cable Users
(For Windows
®
98/98SE/Me/2000 Professional/XP/XP Professional x64 Edition)
Please close any applications running before
installing the MFL-Pro Suite.
Make sure that the supplied CD-ROM you are
using matches your operating system.
For Windows Vista®use the supplied
CD-ROM labeled Windows Vista®.
■ If this window does not appear, use
Windows®Explorer to run the setup.exe
program from the root folder of the Brother
CD-ROM.
Continued ..
Installing the Drivers & Software
Network
Administrators
Setting Up
the machine
Windows®
Parallel
Windows®
USB

18
7Choose Local Connection, and then click
Next. The installation will continue.
8When this screen appears, connect the
parallel interface cable to your PC, and then
connect it to the machine.
(For Windows® XP/XP Professional x64 Edition)
(For Windows®98/98SE/Me/2000)
DO NOT plug in the power cord
before connecting the parallel
interface cable. It may cause
damage to your machine.
9Plug in the power cord and turn on the
machine.
0For Windows®98/98SE/Me/
2000 Professional users, click Next.
For Windows® XP/XP Professional x64
Edition users, wait for a while since the
installation of the Brother drivers will
automatically start. The screens appear one
after another.
DO NOT try to cancel any of the
screens during this installation.
For Parallel Interface Cable Users
(For Windows
®
98/98SE/Me/2000 Professional/XP/XP Professional x64 Edition)
■ If you want to install the PS driver (Brother’s
BR-Script Driver), choose Custom Install
and then follow the on-screen instructions.
When the Select Components screen
appears, check PS Printer Driver, and
then continue following the on-screen
instructions.
Brother recommends that you connect the
machine directly to your computer.
Step 2 Installing the Drivers & Software