Brother HL-6050 User manual

HL-6050/6050D/6050DN SERVICE MANUAL
5-23
<Installing Procedure>
1) Secure the laser unit with the four cup S M3x16 Taptite screws.
2) Connect the connector and flat cable.
Fig.5-41
3) Connect the panel harness ASSY of the top cover ASSY into the relay PCB L ASSY.
4) Secure the top cover ASSY with the four shoulder screws.
Fig.5-42
Taptite, cup S M3x16
Taptite, cup S M3x16
Laser unit
Connector
Flat cable
Top cover ASSY
Hook
Hook
Shoulder screws
Process unit cover ASSY
Panel harness ASSY
Relay PCB L ASSY
Shoulder screws
1
2

CHAPTER 5 PERIODIC MAINTENANCE
5-24
5) Secure the rear cover ASSY with the two shoulder screws.
6) Close the rear tray.
Fig.5-43
7) Install the DX feed ASSY into the printer.
Fig.5-44
Rear cover ASSY
Shoulder
screws
Rear tray
DX feed ASSY
3
2
1

HL-6050/6050D/6050DN SERVICE MANUAL
5-25
8) Install the drum unit into the printer and close the process unit cover ASSY.
Fig.5-45
9) Put the paper tray into the printer.
Fig.5-46
Paper tray
Drum unit
Process unit cover ASSY