Brown Wood Designs of distinction LEXINGTON... User manual

STEP 2 - BOTTOM ASSEMBLY
2 - A
2 - B
2 - A) INTERLOCK BOTTOM 1.5" THICK BOARDS TOGETHER WITH THE
CHAMFERED EDGES FACING THE LEG AND INSERT THE BOLT THROUGH
BOTH PIECES AND SCREW INTO THE THREADED INSERT (2 -B) IN THE BOTTOM
OF THE LEG.
• 12) SCREWS FOR STRAPS
INCLUDED IN PACKAGE:
WOOD PIECES:
• 2) TOP PIECES
• 2) BOTTOM PIECES
• 1) VERTICAL LEG
HARDWARE:
• 2) BOLTS
• 2) THREADED INSERTS
• 4) STRAPS
DATE:
LEXINGTON TABLE BASE KIT ASSEMBLY INSTRUCTIONS
6/11/2018
BOTTOM
TOP
1 - A
1-A) INTERLOCK TOP .75" THICK
BOARDS TOGETHER WITH THE
COUNTERSUNK FACE TOWARDS
THE LEG AND INSERT BOLT THROUGH
BOTH PIECES AND SCREW INTO
THE THREADED INSERT (1 -B) IN
THE TOP OF THE LEG.
STEP 1 - TOP ASSEMBLY
1 - B
1 - A
EXPLODED VIEW

3-C
STEP 3 - INSTALL STRAPS
FOR EACH STRAP)
RUB WASHERS (3 LAG SCREWS AND WASHER
3-B
3-C) SCREW IN SMALL LAG SCREWS WITH
3-A) POSITION EACH STRAP CENTERED ON LEG
3-B) PRE-DRILL HOLES FOR SCREWS
3-A
COMPLETED ASSEMBLY
DATE:
LEXINGTON TABLE BASE KIT ASSEMBLY INSTRUCTIONS
6/11/2018