BSi E Series Supplement

10/23
OWNER'S MANUAL & WARRANTY
BSI, LLC 601 East 64th Avenue, Bldg. A, Denver, CO 80229 800.662.9595 [email protected] bsidesigns.com
-SERIES
AdjustaGuard
1
OWNER’S MANUAL & WARRANTY
ADJUSTAGUARD FOOD SHIELDS
LIGHTS & WARMERS
Specifications subject to change without notice.
Thank you for choosing products from BSI. We appreciate your business and are
available to assist you with all of your needs. This manual has been designed to help
you better understand your product and its proper usage. If you have questions that
go beyond this detailed manual, please contact our Customer Service Department at
1.800.662.9595.

10/23
OWNER'S MANUAL & WARRANTY
BSI, LLC 601 East 64th Avenue, Bldg. A, Denver, CO 80229 800.662.9595 [email protected] bsidesigns.com
-SERIES
AdjustaGuard
2
NOTES

10/23
OWNER'S MANUAL & WARRANTY
BSI, LLC 601 East 64th Avenue, Bldg. A, Denver, CO 80229 800.662.9595 [email protected] bsidesigns.com
-SERIES
AdjustaGuard
3
Important Owner Information ........................... 3 Lights and Warmers
Safety Precautions ...................................................... 4 Safety Precautions ................................................................ 17
Receipt and Inspection of Equipment ............. 4 Receiving and Inspecting the Equipment .......... 18
Models ........................................................................................... 18
AdjustaGuard Food Shields Cleaning & Identifying Equipment ............................ 19
Models ................................................................................. 4 Changing LED Bulb ............................................................. 19
Basic Components and Layout ......................... 5 Heating Elements ................................................................... 20
AdjustaGuard Bracket ............................................. 5Ordering Parts ......................................................................... 20
AdjustaGuard Bracket Assembly & Parts ... 6 Wiring Installations ................................................................ 21
Bracket Operation ...................................................... 7-8 Wiring Diagrams ..................................................................... 21
Cleaning Instructions ............................................... 9
End Panels ....................................................................... 9 Warranty ..................................................................................... 23
Mounting Options ................................................... 10-14
Installation Instructions .......................................... 15
This manual is an important part of your equipment. Your Owner's Manual should be stored in a safe
location as it will be useful for the life of your product. It contains important safety information concerning
the maintenance, operation, and servicing of these products.
Failure to properly follow this manual may result in serious injury. Do not operate this equipment unless you
have read and understood the manual contents.
Record your guards' model number(s) and light/warmer unit serial number(s) (if applicable) to use as a
reference when contacting your local representative or BSI headquarters.
Model No.:
Serial No.:
Model No.:
Serial No.:
Date of
Purchase:
Other:
IMPORTANT OWNER INFORMATION
TABLE OF CONTENTS
BSI, LLC
Business Hours: 8:00 AM to 5 PM MST
Telephone: [phone]
Fax: [phone]
Web Address: www.bsidesigns.com

10/23
OWNER'S MANUAL & WARRANTY
BSI, LLC 601 East 64th Avenue, Bldg. A, Denver, CO 80229 800.662.9595 [email protected] bsidesigns.com
-SERIES
AdjustaGuard
4
SAFETY PRECAUTIONS
The AdjustaGuard food guard must be installed
in accordance with applicable installation code by
a person familiar with the product's construction,
operation, and potential hazards involved.
Care should be taken during unloading and
uncrating to avoid equipment damage.
1. Visually inspect the package, skid, or container
exterior. Any damage should be noted and
reported to the delivering carrier immediately.
2. Open and inspect contents for broken glass
and verify that all items were received.
3. In the event that damage is discovered, notify
the carrier and request freight damage forms.
4. Request an inspection by the shipping
company of the damaged equipment. This
should be done within 10 days of equipment
receipt.
5. Retain all crating materials until an inspection
has been made or waived.
6. All packages contain a product owner's
manual and warranty document, along with
installation drawings for your installer.
RECEIPT AND INSPECTION
OF EQUIPMENT
ADJUSTAGUARD MODELS
All AdjustaGuard models are certified by NSF.
AdjustaGuard food guards are manufactured
in many different configurations. While the
components are similar, your model’s glass and
posts may not be. The models shown below should
be maintained in the same manner based on the
instructions within this manual.
COMPONENT
EA100 EA100A
EA101A EA101A-2
EA101A-3 EA101A-5
EA112A

10/23
OWNER'S MANUAL & WARRANTY
BSI, LLC 601 East 64th Avenue, Bldg. A, Denver, CO 80229 800.662.9595 [email protected] bsidesigns.com
-SERIES
AdjustaGuard
5
Fig. 1 shows two glass panels with a center bracket.
BASIC COMPONENTS & LAYOUT
ADJUSTAGUARD BRACKETS
Figure 1
1" Round Post
Glass Panel
CUSTOMER SIDE
SERVER SIDE
Left Bracket
Handle (for angle adjustment)
Right Bracket Glass End Panel
Adjustment Pins
(for height adjustment)
Center Bracket
End Cap
Flange
A. Left AdjustaGuard Bracket B. Center AdjustaGuard Bracket C. Right AdjustaGuard Bracket

10/23
OWNER'S MANUAL & WARRANTY
BSI, LLC 601 East 64th Avenue, Bldg. A, Denver, CO 80229 800.662.9595 [email protected] bsidesigns.com
-SERIES
AdjustaGuard
6
ADJUSTAGUARD BRACKET ASSEMBLY AND PARTS
Exploded View
Location Part # Description
A 17525 Track Block
B 17503 AMA Bracket
C 17413 Glass Clip Flatback
D 17562 End Cap
E 17502 AMA Ratchet Handle
F 17300 1/4" Black Nylon Washer
G17315 Screw 8-32 x .5" Pan Head
H 17313 1/4-20 x .5" Pan Head Screw
I 17513 Thumb Screws
J 17500 Slider Block
K17533 Stopper Block
L17333 Set Screw 5/16-24 x .3125" Nylon Tip
M 17312 Screw 8-32 Flat Head Undercut
N 17358 Screw 6-20 x .5" Self Tapper
How to Order Replacement Parts
If you need to order replacement parts for your
AdjustaGuard food guard, contact the customer
service.
Phone: [phone]
Email: [email protected]
A
B
H
E
K
C
L
M
I
F
D
J
N
N
G
Be sure to designate part finishes when ordering.

10/23
OWNER'S MANUAL & WARRANTY
BSI, LLC 601 East 64th Avenue, Bldg. A, Denver, CO 80229 800.662.9595 [email protected] bsidesigns.com
-SERIES
AdjustaGuard
7
BRACKET OPERATION 
ADJUSTAGUARD ANGLE ADJUSTMENT
1. BSI recommends the use of two people when adjusting or performing maintenance to your
AdjustaGuard sneeze guard. Using only one person to adjust your sneeze guard may cause damage to
the brackets.
2. Hold the glass in place while loosening both handles about 1/4 - 1/2 turn. Do not remove screw or loosen
more than one full turn. Do not force the glass to rotate. If both handles are loose, the glass will move
freely.
3. Once both sides are loosened, gently rotate the glass to the desired position. Tighten both handles
before releasing the glass. Do not overtighten. Overtightening will cause the screw to strip the bracket.
4. Repeat steps 2-4 to adjust the glass angle.
SPRING-LOADED HANDLE:
The handle is spring loaded and can be
used like a ratchet when spacing does not
allow a full turn of the handle.
Loosen handle 1/4 - 1/2 of a rotation.
Tighten handle after desired angle is
achieved.

10/23
OWNER'S MANUAL & WARRANTY
BSI, LLC 601 East 64th Avenue, Bldg. A, Denver, CO 80229 800.662.9595 [email protected] bsidesigns.com
-SERIES
AdjustaGuard
8
BRACKET OPERATION -
ADJUSTAGUARD HEIGHT ADJUSTMENT
1. While holding glass in place, slightly loosen the
thumb screws (2 per bracket). It is not necessary
to completely unscrew thumb screws to the
point of removal.
2. Move slider block up or down to desired location.
For longer units (50” or longer), BSI recommends
the use of two people when adjusting the glass
height.
3. Once the desired height is determined, tighten
each thumb screw. Do not overtighten the
thumb screws or you may cause damage to the
threads and/or bracket.
Note: Slider block is located at the top of the track
block when shipped. For best results, adjust slider
block to the middle of the track.
Thumb
Screws
Slider
Block
Using an allen wrench (provided by BSI), loosen
glass clip set screws on both brackets while
holding the glass.
Note: It is not necessary to remove set screws
from glass brackets. Removal will make
adjustments more difficult.
While holding glass, adjust glass in brackets to
desired position.
Equally tighten all glass clip set screws on both
sides, being careful not to overtighten. Tighten
periodically throughout life of sneeze guard.
Hex Screw
GLASS LIMITATIONS
Permissible Load (Pounds Per Square Feet)
Glass Thickness 12" Span 24" Span 36" Span 48" Span 60" Span
1/4" 73.5 lbs. 15.9 lbs. 5.3 lbs. 1.5 lbs. N/A
3/8" 196.7 lbs. 45.5 lbs. 17.5 lbs. 7.7 lbs. 3.2 lbs.
1/2" 345.4 lbs. 81.4 lbs. 32.6 lbs. 15.4 lbs. 7.5 lbs.
1.
2.
3.

10/23
OWNER'S MANUAL & WARRANTY
BSI, LLC 601 East 64th Avenue, Bldg. A, Denver, CO 80229 800.662.9595 [email protected] bsidesigns.com
-SERIES
AdjustaGuard
9
SADDLE
THREADED PIN
WASHER
NUT
END PANEL
• Wipe the surface with a clean, damp cloth to remove fingerprints, dust, etc.
• Spray with a light coating of glass cleaner to remove grease and dirt. Use a non-ammonia cleaner.
• Do not use brass polish on your food guards as it will degrade the finish.
• Do not scrub the surface with abrasives like steel wool, pot scrubbers, abrasive powders, or similar
products as they will remove the protective coating.
• If unit is fitted with a warmer, do not clean the glass or housing when warmer is hot. Cleaning warmer
when hot can cause staining or damage to warmer finish.
CLEANING INSTRUCTIONS
END PANELS
To meet NSF guidelines, end panels are included on all BSI
quotations unless otherwise specified.
Location Part # Part Name
9336 Decorative Nut
10 484 Clear Mylar Spacer
11 15756 End Panel Bracket Assembly
12 1/4-20 x 1-1/4" Machine Screw Flat Phillips
NSF End Panel Requirement Exemption
NSF/ANSI Standard 2 - 2018
5.36.1.6.2 A food shield intended to be installed a maximum of 3 inches (76 mm) from a building wall
perpendicular to the food shield is exempt from the requirements of 5.36.1.6.1 provided that the height of
the building wall is not lower than the overall height of the food shield. The manufacturer's specification
sheet, brochure, installation instructions, and/or shop drawings shall include these building wall and
proximity requirements.

10/23
OWNER'S MANUAL & WARRANTY
BSI, LLC 601 East 64th Avenue, Bldg. A, Denver, CO 80229 800.662.9595 [email protected] bsidesigns.com
-SERIES
AdjustaGuard
10
F0 Mount
0.55"
1"
1" Post
F1 Mount
0.94"
1.65"
2"
1" Post
Set Screw
0.94"
1-1/4"
1" Post
F2 Mount
Set Screw
0.82"
3"
2.13"
0.11"
1" Post
F3 Mount
3-1/2"
2-1/2"
1-3/8"
1" Post
F4 Mount
Welded by
Others
0.11"
1" Post
F5 Mount
Trim Ring
(#17111)
2"
Welded by
Others
1-1/8"
1-1/2"
1" Threaded Post
(#17155)
F6 Mount
Trim Ring
(#17113)
Washer
(#17303)
1"-14 Hex Nut (#17307)
1/4"
1" 1-1/8"
1-3/8"
1" Post
F7 Mount
F4 Grommet
(#17109)
Set
Screw
F1 Flange
(#721BPS)
Flange
(#17563)
Grommet
(#17109)
Flange
(#721BPS)
Flange
(#17103)
Flange
(#17107)
MOUNTING OPTIONS FOR 1" ROUND POST
Specifications subject to change without notice.

10/23
OWNER'S MANUAL & WARRANTY
BSI, LLC 601 East 64th Avenue, Bldg. A, Denver, CO 80229 800.662.9595 [email protected] bsidesigns.com
-SERIES
AdjustaGuard
11
F8 Mount
1-1/8"
1" Post
Set Screw
Set Screw
F9 Mount
3-1/4"
2-1/2" 1-3/8"
0.44"
1" Post
F10 Mount
Set Screw
1-1/8"
1" Post
F11 Mount
1-1/8"
F5 Trim Ring
(17111)
Set Screw
1-3/8"
F12 Mount
1" Threaded
Post
Set
Screw
F12 Upper
Mount
F12 Lower
Mount
1.70"
Triton Mount
Assembly
(#17115)
Flange
(#17114)
F4 Grommet
(#17109)
F5 Trim Ring
(#17111)
F2 Flange
(#17103)
1" Threaded Post
(#17155)
F2 Flange
(#17103)
F2 Flange
(#17103)
F1 Flange
(#721BPS)
MOUNTING OPTIONS FOR 1" ROUND POST
Specifications subject to change without notice.

10/23
OWNER'S MANUAL & WARRANTY
BSI, LLC 601 East 64th Avenue, Bldg. A, Denver, CO 80229 800.662.9595 [email protected] bsidesigns.com
-SERIES
AdjustaGuard
12
F1 Mount
1"
1-15/16"
1" Square
Post
1" Square
Post
Set
Screw
F3 Mount F10 Mount
F8 Mount
F3 Mount F11 Mount
F5 Mount
7/8"
1-1/8"
Counter
Cutout
Welded
by Others
1/8"
1/8"
1-1/2"
1-1/8"
MOUNTING OPTIONS FOR 1" SQUARE POST
2-1/2"
1-15/16"
2-1/2"
3-1/2"
2-1/2"
1" Square
Post
1" Square
Post
1" Square
Post
1" Square
Post
1" Square
Post
1-1/8"
Counter
Cutout
2"
2"
Set
Screw
Set
Screw
Set
Screw
1-1/8"
Counter
Cutout
1-1/8"
Counter
Cutout
Set
Screw
F5 Trim Ring
(#17112)
F5 Trim Ring
(#17112)
F5 Trim Ring
(#17112)
F1 Flange
(#17101)
F1 Flange
(#17101)
F1 Flange
(#17101)
F1 Flange
(#17101)
F1 Flange
(#17101)
F3 Flange
(#17119)
F3 Flange Narrow
(#17119)
Specifications subject to change without notice.

10/23
OWNER'S MANUAL & WARRANTY
BSI, LLC 601 East 64th Avenue, Bldg. A, Denver, CO 80229 800.662.9595 [email protected] bsidesigns.com
-SERIES
AdjustaGuard
13
F1 Mount
2-7/8"
Set
Screw
Set
Screw
Set
Screw
F2 Mount F10 Mount
F8 Mount
F5 Mount F11 Mount
Welded by
Others
MOUNTING OPTIONS FOR 112" SQUARE POST
1-1/2"
Square
Post
1-1/2"
Square
Post
1-1/2"
Square
Post
1-1/2"
Square
Post
1-1/2"
Square
Post
1-1/2"
Square
Post
1-1/2"
1-1/2"
1/8"
3-1/2"
2-7/8"
3-1/2"
3-1/2"
3-1/2"
2-7/8"
2-7/8"
3-1/2"
1-5/8"
Counter
Cutout
3-1/2"
Set
Screw
1-5/8"
Counter
Cutout
1-5/8"
Counter
Cutout
Set
Screw
1-5/8"
Counter
Cutout
F5 Trim Ring
(#17134)
F5 Trim Ring
(#17134)
F5 Trim Ring
(#17134)
F1 Flange
(#17123)
F1 Flange
(#17123)
F1 Flange
(#17123)
F1 Flange
(#17123)
F1 Flange
(#17123)
F2 Flange
(#17127)
Specifications subject to change without notice.

10/23
OWNER'S MANUAL & WARRANTY
BSI, LLC 601 East 64th Avenue, Bldg. A, Denver, CO 80229 800.662.9595 [email protected] bsidesigns.com
-SERIES
AdjustaGuard
14
F1 Mount
4"
F2 Mount
F5 Mount
2"
3"
4"
Welded by
Others
2-1/8"
Counter
Cutout
1-1/2"
1-1/2"
4"
3-3/16"
3-3/16"
1/8"
MOUNTING OPTIONS FOR 2" SQUARE POST
2" Square
Post
2" Square
Post
2" Square
Post
3"
3-1/4"
2-3/8"
3-15/16"
F5 Trim Ring
(#17150)
F1 Flange
(#17145)
F1 Flange
(#17141)
Specifications subject to change without notice.

10/23
OWNER'S MANUAL & WARRANTY
BSI, LLC 601 East 64th Avenue, Bldg. A, Denver, CO 80229 800.662.9595 [email protected] bsidesigns.com
-SERIES
AdjustaGuard
15
INSTALLATION INSTRUCTIONS
Step 1: Referring to the approval drawings, locate
and place end post on the counter in proper
location.
Step 2: Mark holes with
a pencil. Set post aside
and drill pilot holes
where marked.
Step 3: Align pilot
holes with flange holes
and insert screws.
Tighten screws firmly
in place.
Step 6: Slide glass into glass clips. Tighten glass
using Allen wrench provided.
Step 4: Measure the center line from flange to flange
to locate your second post position.
Step 5: Repeat steps 2-4 to install remaining posts.
NOTE: Mounting style may vary. Please refer to
flange options (pages 11-15) for more details.
NOTE: Customer can use the glass as a guide to
determine post location.
Specifications subject to change without notice.

10/23
OWNER'S MANUAL & WARRANTY
BSI, LLC 601 East 64th Avenue, Bldg. A, Denver, CO 80229 800.662.9595 [email protected] bsidesigns.com
-SERIES
Helios™
16
Specifications subject to change without notice.
OWNER’S MANUAL & WARRANTY
HELIOS™LIGHT & WARMER COMBO

10/23
OWNER'S MANUAL & WARRANTY
BSI, LLC 601 East 64th Avenue, Bldg. A, Denver, CO 80229 800.662.9595 [email protected] bsidesigns.com
-SERIES
Helios™
17
SAFETY PRECAUTIONS
ELECTRIC SHOCK HAZARD:
Units supplied without an electrical plug
require a hardwired connection to on-site
electrical system. Connection must be properly
grounded and of correct voltage, size, and
configuration for electrical specifications
of unit. Contact a qualified electrician to
determine and perform proper electrical
connection.
Plug unit into a properly grounded electrical
receptacle of the correct voltage, size, and
plug configuration. If plug and receptacle do
not match, contact a qualified electrician to
determine and install proper voltage and size
electrical receptacle.
Turn OFF power switch, unplug power cord/
turn off power at circuit breaker, and allow
unit to cool before performing any cleaning,
adjustments, or maintenance.
Discontinue use if power cord is frayed or worn.
DO NOT submerge or saturate with water. Unit
is not waterproof. Do not operate it unit has
been submerged or saturated with water.
Do not steam clean or use excessive water on
unit.
Do not attempt to repair or replace a damaged
power cord. The cord must be replaced by BSI,
Authorized Service Agent, or a person with
similar qualifications.
Use only genuine BSI replacement parts when
service is required. Failure to do so will void all
warranties and may subject users to hazardous
electrical voltage, resulting in electrical shock
or burn. Some aftermarket replacement parts
are not designed to safely operate on BSI
equipment.
FIRE HAZARD:
Locate unit the correct distance from
combustible walls and materials. If safe distances
are not maintained, discoloration or combustion
could occur. Refer to specific installation and
mounting information in this manual for proper
clearances.
EXPLOSION HAZARD:
Do not store or use substances with flammable
vapors or liquids in the vicinity of this or any
other appliance.
Make sure all operators have been instructed on
the safe and proper use of the unit.
Make sure food product has been heated to the
proper food-safe temperature before placing
under unit. Failure to heat food product properly
may result in serious health risks. This unit is for
holding pre-heated food product only.

10/23
OWNER'S MANUAL & WARRANTY
BSI, LLC 601 East 64th Avenue, Bldg. A, Denver, CO 80229 800.662.9595 [email protected] bsidesigns.com
-SERIES
Helios™
18
LIGHTS & WARMERS
ALL HELIOS UNITS
ARE SHIPPED USING
ZIP TIES TO SECURE
DURING TRANSIT.
AFTER INSTALLATION,
CAREFULLY REMOVE ALL
ZIP TIES.
Food shield systems can be built with lights,
warmers or a combination of the two. Proper
maintenance for these products is very
important for safety. The following pages will
detail the proper methods of keeping your
product clean, how and where to exchange
parts, and include diagrams for proper wiring.
RECEIVING AND
INSPECTING THE
EQUIPMENT
Specifications subject to change without notice.
Care should be taken during unloading and
uncrating to avoid equipment damage.
1. Visually inspect the package, skid, or
container exterior. Any damage should be
noted and reported to the delivering carrier
immediately.
2. Open and inspect contents for damage and
verify that all items were received.
3. In the event that damage is discovered,
notify the carrier and request freight damage
forms.
4. Request an inspection by the shipping
company of the damaged equipment. This
should be done within 10 days of equipment
receipt.
5. Retain all crating materials until an
inspection has been made or waived.
This product must be installed in
accordance with the applicable
installation code by a person familiar
with the construction and operation
of the product and the hazards
involved.
Helios™Light/Warmer Combo Unit Model 705E
MODELS
Helios™ lights and warmers are
certified by NSF and UL.

10/23
OWNER'S MANUAL & WARRANTY
BSI, LLC 601 East 64th Avenue, Bldg. A, Denver, CO 80229 800.662.9595 [email protected] bsidesigns.com
-SERIES
Helios™
19
Once your food shield has been properly
installed, it is important to keep your unit clean
for optimal operation.
• Turn off the power to your light or warmer
prior to cleaning. Only clean when Helios™
warmer is cool. Cleaning when the warmer
is hot can cause staining or damage to
food warmer finish.
• Wipe the surface with a clean, damp cloth to
remove fingerprints, dust, etc.
• Spray with a light coating of glass cleaner
to remove grease or other dirt. Use a non-
ammonia cleaner.
• Be sure not to spray any cleaning product
directly into the LED light or heating
elements.
Each Helios unit contains an Identification
Sticker. This sticker provides the customer with
the following information:
• Serial Number
• Model Number
• Manufacture Date
• Electrical Information
IDENTIFYING YOUR
PRODUCT
CLEANING INSTRUCTIONS
Specifications subject to change without notice.
• Turn off power to all lights and warmers.
• Carefully unscrew the end plate and slide out the
entire LED light.
• If mutiple lights are connected to each other,
carefully disconnect serial connector or power
connector.
• Remove defective light and replace with new LED
light. Carefully reconnect the connector and slide
in the light bar assembly.
• Replace end cover and two screws.
CHANGING THE LED BULB
ORDERING NEW LED LIGHTS
Part # Description
16289E Kelly LED:_12"_LED_Light_Bar
16290E Kelly LED:_18"_LED_Light_Bar
16292E Kelly LED:_36"_LED_Light_Bar
16505E Kelly LED:_48"_LED_Light_Bar
16293E Kelly LED:_10'_Power_Cord_w/o_Plug
16294E Kelly LED:_Serial_Connector
16295E Kelly LED:_6" Power_Connector
HELIOS™
800.662.9595
Commercial Cooking Appliance 3MUU

10/23
OWNER'S MANUAL & WARRANTY
BSI, LLC 601 East 64th Avenue, Bldg. A, Denver, CO 80229 800.662.9595 [email protected] bsidesigns.com
-SERIES
Helios™
20
Part # Description
492E-18-BK Element:_18"_120V_Heater_350W
492E-24-BK Element:_24"_120V_Heater_500W
492E-30-BK Element:_30"_120V_Heater_660W
492E-36-BK Element:_36"_120V_Heater_800W
492E-42-BK Element:_42"_120V_Heater_950W
492E-48-BK Element:_48"_120V_Heater_1100W
492E-54-BK Element:_54"_120V_Heater_1250W
492E-60-BK Element:_60"_120V_Heater_1400W
492E-66-BK Element:_66"_120V_Heater_1560W
Part # Description
496E-24-BK Element:_24"_208V_Heater_500W
496E-30-BK Element:_30"_208V_Heater_660W
496E-36-BK Element:_36"_208V_Heater_800W
496E-42-BK Element:_42"_208V_Heater_950W
496E-48-BK Element:_48"_208V_Heater_1100W
496E-54-BK Element:_54"_208V_Heater_1250W
496E-60-BK Element:_60"_208V_Heater_1400W
496E-66-BK Element:_66"_208V_Heater_1560W
Helios™heat and light units contain a tubular
heating element that can burn out — similar to a
light bulb.
Replacement of the tubular heating element
should be completed by a professional service
technician. If you have additional questions,
contact BSI at 800.662.9595.
REPLACING THE TUBULAR
HEATING ELEMENT
REPLACEMENT HEATING
ELEMENTS
Specifications subject to change without notice.
If your Helios unit needs service, contact your local
installer for assistance.
For questions about the replacement parts, contact
BSI at 800.662.9595.
PARTS & SERVICE
HEAT WARNING
STICKER HERE
ELECTRIC SHOCK
WARNING STICKER HERE
ELEMENT CLIPS
HEATING
ELEMENT
POWER CORD
LED LIGHT
LED CONNECTOR