BSi R3-R8D User manual

R3-R8D Smart Deadbolt
Mechanical Functions

Touch Screen
USB Type C
Port
Cylinder

Quick-Unlock
Button
Bluetooth Button
Reset Button
Auto Re-lock
Manual Re-lock
Vacation-Mode
Button
Thumb Turn

Quick-Unlock Button
Press this button to unlock the lock,
same as function to turn the
thumb turn.
Switch
Auto re-lock
Slide the switch to the right. When the
door is closed, a sensor by the latch
side will detect it to trigger the deadbolt
to re-lock automatically.
Manual re-lock
Slide the switch to the left to disable
auto re-lock function.
To lock the door from the inside, turn
the thumb turn.
To lock the door from the outside, wake
up the touch screen, press ＃, or use a
key.

Vacation Mode Button
Activate vacation mode, the touch
screen will be shut down, pin code
access, and smart keys are disabled.
Only a key can unlock the lock.
Setting up from the inside
Press and hold the button until a beep
is heard.
In addition, there are 3 ways to disable
vacation mode, and you will also hear a
beep afterwards.
□
1Press quick-unlock button.
□
2Press and hold the vacation mode
..button until it beeps.
□
3When the door is closed under auto
..re-lock mode. Unlock the door using
..the thumb turn, then close the door.
..The bolt will be extended
.automatically with a beep sound.

△
!If the lock is not in auto re-lock
.mode, vacation mode can’t be
.disabled by □
3, please follow □ 1or
□
2only.
Setting up from the outside
Please make sure to have the key with
you.
Slide the switch to auto re-lock mode,
unlock the lock, and you stand outside
of the door, leave the door open. Next,
press and hold the vacation mode
button until it beeps. Close the door,
the bolt will be extended automatically.
To disable the vacation mode from
outside of the door, use the key to
unlock the lock, then close the door,
the bolt will be extended automatically
with a beep sound.

Other Features
Unlock with Fake Code
You can prevent user code exposure by
entering random digits before, or after
user code.
△
!Note: The maximum length of
.user code + random digits is total
.12 digits, user code must be 4-6
digits.

Wrong Entry Limit
After 10 failing attempts of entering
user codes, the touch screen will be
shut down for 14 minutes.
Press quick-unlock button to resume
the touch screen immediately.
△
!When the touch screen is shut down
due to 10-time entries of failed user
.codes, and in the same time the
.lock is under vacation mode. Press
.the quick-unlock button twice to
resume the touch screen.
Low Battery Warning
When the lock is in low battery, the
touch screen will show a digit for entry
times left to unlock the lock. Also it will
beep & ＊blink 3 times of warning to
notify users to change batteries.

Emergency Power Supply
When batteries are completely dead,
use a type C cable to temporarily power
up the lock.
△
!The USB type C port is not for
charing rechargeable battery. It
only gives power to unlock the lock
while the lock battery is completely
dead.

R3-R8D Smart Deadbolt
Mechanical Functions