BT Freestyle 350 User manual

16hrs
User Guide
BT Freestyle 350
Ofces worldwide
The services described in this publication are subject to availability and may be
modied from time to time. Services and equipment are supplied subject to
British Telecommunications plc’s respective standard conditions of contract.
Nothing in this publication forms any part of a contract.
© British Telecommunications plc 2008.
Registered Ofce: 81 Newgate Street, London EC1A 7AJ.
Registered in England No. 1800000.
Designed and produced by The Art & Design Partnership Ltd.
Printed in China / Issue 2 / ADP11-08
10%
1 Plug in
2 Charge
3 Go!
General information
For information on safety instructions,
cleaning, technical information or
connecting to a switchboard, please
refer to the ‘General Information’
section in the full user guide at
www.bt.com/producthelp
Guarantee
Your BT Freestyle 350 is guaranteed for a period of 12
months from the date of purchase.
Subject to the terms listed below, the guarantee
will provide for the repair of, or at BT’s or its agent’s
discretion the option to replace the BT Freestyle 350,
or any component thereof, (other than batteries),
which is identied as faulty or below standard, or as a
result of inferior workmanship or materials. Products
over 28 days old from the date of purchase may be
replaced with a refurbished or repaired product.
The conditions of this guarantee are:
• The guarantee shall only apply to defects that
occur within the 12 month guarantee period.
• Proof of purchase is required.
• The equipment is returned to BT or its agent
as instructed.
This guarantee does not cover any faults or defects
caused by accidents, misuse, fair wear and tear,
neglect, tampering with the equipment, or any
attempt at adjustment or repair other than through
approved agents.
This guarantee does not affect your statutory rights.
For further information within and outside the 12
month guarantee, please refer to the full user guide at
www.bt.com/producthelp
Product disposal instructions
The symbol shown here and on the product
means that the product is classed as Electrical or
Electronic Equipment and should not be disposed with
other household or commercial waste at the end of its
working life.
The Waste of Electrical and Electronic Equipment
(WEEE) Directive (2002/96/EC) has been put in place
to recycle products using best available recovery and
recycling techniques to minimise the impact on the
environment, treat any hazardous substances and
avoid the increasing landll.
Product disposal instructions for residential users
When you have no further use for it, please remove
any batteries and dispose of them and the product as
per your local authority’s recycling processes. For more
information please contact your local authority or the
retailer where the product was purchased.
Product disposal instructions for business users
Business users should contact their suppliers and check
the terms and conditions of the purchase contract
and ensure that this product is not mixed with other
commercial waste for disposal.
Warning
This equipment is not designed for making
emergency telephone calls when the power fails.
Alternative arrangements should be made for
access to emergency services.
R&TTE Directive & Declaration
of Conformity
This product is intended for use within the UK for
connection to the public telephone network and
compatible switchboards.
This equipment complies with the essential
requirements for the Radio Equipment and
Telecommunications Terminal Equipment Directive
(1999/5/EC).
For a copy of the Declaration of Conformity
please refer to www.bt.com/producthelp
Setting up is easy. Just follow the simple steps in this guide.
If you need further assistance, please visit our website www.bt.com/producthelp
to view our advanced user guide or call our helpdesk on 0800 218 2182*
2 Charge
1 Activate batteries by pulling the
plastic tab away from the back of
the handset.
2 Place handset on base to charge.
3 After 16 hours, plug the telephone line
cord into the telephone wall socket.
Important: Charge the handset batteries for 16 hours
or your phone may not work.
Set up your additional handsets (multipacks only)
1 For each additional handset and charger: plug the mains power adaptor (item code
040371) into the socket on the underside of the charger and plug the other end
into the mains wall socket and switch the power on.
2 Activate batteries as shown above.
3 Place handset on the charger to charge for 16 hours.
If you ever need to remove the batteries, simply slide open the battery compartment
cover and insert your nger nail under the end of the batteries to pull them out.
Your BT Freestyle 350 is now ready for use.
2 Plug in mains power
adaptor (item code
042172). Secure power
adaptor cable behind
retaining clip on back
of base.
1 Plug in telephone line
cord but don’t plug the
other end into the wall
socket yet.
Please
turn
over
Important: Only use the cables and rechargeable batteries supplied in this box,
or this product may not work. Any replacement rechargeable batteries must be
of the same type.
Check box contents
3 Plug the other end of
the power adaptor
into the wall socket
and switch on.
Handset
Handset Charger
Mains power
adaptor (item code
042172)
Mains power
adaptor (item code
040371)
Telephone line
cord
2x AAA Ni-MH 750mAh
rechargeable batteries
(already in handset)
2x AAA Ni-MH 750mAh
rechargeable batteries
(already in handset)
Base
Contents for each additional handset (multipacks only)
1 Plug in
* Calls made from within the UK mainland network are free. Mobile and International call costs may vary.
BT &
Working together, supporting energy saving products
BT & British Gas have joined forces to help our customers nd new ways to save energy
around the home, so we can all do our bit for the environment & save money too!

Answering machine
Your answering machine is on and ready to record messages. The controls are shown in
the base diagram to the bottom left. You can also access the answer machine features
through the handset menu.
For detailed instructions on all the answering machine features see the full user
guide online at www.bt.com/producthelp
Recording your own outgoing message
Press Menu, scroll to
Answer machine menu, press OK.
Scroll or to
Answer settings , press OK.
Scroll or to
Outgoing message , press OK. Record OGM is highlighted, press OK.
Scroll or to highlight
Answer & record or Answer only , press OK.
Speak your message after the announcement. To stop recording, press Save.
Your message is played back to you.
Set answer delay
Press Menu, scroll to
Answer machine menu, press OK.
Scroll or to
Answer settings , press OK. Scroll or to Answer delay , press OK.
Current setting is highlighted. Scroll or to select the number of rings or time
saver, press OK to conrm.
Text messaging
Before sending and receiving text messages you need to register to the text
messaging service and subscribe to Caller Display. You will be automatically registered
to the text message service when you send your rst text. Please note that some
other network provider lines may not be compatible with this text messaging service.
See the full user guide online at www.bt.com/producthelp for details.
3 Go!
Set date and time
Press Menu, scroll to Settings menu, press OK.
Press until you scroll down to
Date/Time , press OK.
Enter the date using the format (DD/MM/YY), press OK.
Enter the time using the format (HH/MM), press OK.
Making calls
Press then dial the phone number. Press to end the call.
Answering calls
If you have subscribed to Caller Display, the caller’s details will be displayed before you
answer (see the full user guide online at www.bt.com/producthelp for details).
Lift the handset from the base or charger to answer incoming calls. If the handset is not
on the base or charger, press .
Handsfree
Press during a call to switch the call to loudspeaker.
Secrecy (Mute)
Press during a call to activate secrecy mode. Press again to resume your call.
Redial
Press , scroll or through the list to the number you want.
Press to redial the number displayed.
Directory
Storing new directory entries (up to 100)
Press to open the directory. When storing the rst entry, Empty is displayed.
Otherwise, the rst entry in the directory is displayed.
Press Opt.
New entry is highlighted. Press OK.
Using the keypad, enter the telephone number (including area code) and press OK.
Using the letters on the keypad, enter the name. You may need to press the same button
a few times until the letter you want is displayed. For example, press once for
A ,or
twice for B . If you make a mistake, press Del. Press to switch between upper case/
lower case and digits, and to enter a space.
Press Save. The entry is saved in the directory.
Dialling a directory entry
Press . The rst entry is displayed.
Press or to scroll to the entry you want.
Press to dial.
Caller Display and the Calls list
You must subscribe to a Caller Display service for this feature to work. Your network
provider may charge you for this service.
When you have new, unanswered calls in the calls list, the display will show
New calls .
View and dial from the Calls list
Press to open the calls list.
The most recent missed call is displayed. Press or to scroll through the list.
Press to dial the number displayed.
Or, press Opt to access further options e.g. view call details, save number or delete
entries.
Find out more
• New Frequently Asked Questions available at www.bt.com/producthelp
• If you need more detailed instructions, a full user guide is available to
download from www.bt.com/producthelp
• If you cannot nd the answer to your problem in the full online
user guide, then please call the free Helpline on 0800 218 2182*
or email [e-mail]. Our dedicated advisors are more
likely to be able to help you than the retailer where you made your purchase.
Your phone
Handset
Base Help
Most problems can be xed with a few simple checks.
Problem Solution
No dial tone Only use the cables and batteries supplied.
Make sure both the mains power adaptor cable and
telephone line cord are plugged into the correct sockets.
Poor speech quality Make sure the product is not located too close to other
electrical appliances. This can also help improve the
handset range from the base.
Battery icon ashing/
handset dead
Make sure you charge the batteries for 16 hours before use
to ensure maximum battery performance.
Using broadband on the same
phone line?
Make sure you plug the phone
into the wall socket via an ADSL
microlter (not supplied), otherwise
you may have problems with this
product and your broadband service. ADSL
microlter
Open and scroll through
Calls list.
Increase earpiece
or speaker volume.
Scroll up through
menu options.
Select options shown
on the display above
each button.
During a call, press to
switch secrecy on/off.
Activate handsfree
(loudspeaker) mode.
Open and scroll through
redial list.
Decrease earpiece or
speaker volume.
Scroll down through
menu options.
Make and receive calls.
Access SMS texts, Calls lists,
and BT services.
Recall for use with
switchboards.
In standby mode, press
to access the directory.
In menu mode, press to
scroll through the
menu options.
End a call.
Press and hold to switch
handset off.
Return to standby.
Press and hold to lock/
unlock keypad.
Press to ring /
nd the
handset(s).
BT Freestyle
Switch answer
machine
on/off.
On = power on
Flashing = line in use.
Stop message
playback.
Play messages.
Press once to
repeat current
message, twice
to play previous
message.
Delete
messages.
Message counter
Play next
message.
Adjust speaker
volume during
playback.
Press and hold to switch
handset ringer on / off.
When entering text,
switches between upper
and lower case letters.
SMS LED
Indicates new text
messages received.

16hrs
User Guide
BT Freestyle 350
Ofces worldwide
The services described in this publication are subject to availability and may be
modied from time to time. Services and equipment are supplied subject to
British Telecommunications plc’s respective standard conditions of contract.
Nothing in this publication forms any part of a contract.
© British Telecommunications plc 2008.
Registered Ofce: 81 Newgate Street, London EC1A 7AJ.
Registered in England No. 1800000.
Designed and produced by The Art & Design Partnership Ltd.
Printed in China / Issue 2 / ADP11-08
10%
1 Plug in
2 Charge
3 Go!
General information
For information on safety instructions,
cleaning, technical information or
connecting to a switchboard, please
refer to the ‘General Information’
section in the full user guide at
www.bt.com/producthelp
Guarantee
Your BT Freestyle 350 is guaranteed for a period of 12
months from the date of purchase.
Subject to the terms listed below, the guarantee
will provide for the repair of, or at BT’s or its agent’s
discretion the option to replace the BT Freestyle 350,
or any component thereof, (other than batteries),
which is identied as faulty or below standard, or as a
result of inferior workmanship or materials. Products
over 28 days old from the date of purchase may be
replaced with a refurbished or repaired product.
The conditions of this guarantee are:
• The guarantee shall only apply to defects that
occur within the 12 month guarantee period.
• Proof of purchase is required.
• The equipment is returned to BT or its agent
as instructed.
This guarantee does not cover any faults or defects
caused by accidents, misuse, fair wear and tear,
neglect, tampering with the equipment, or any
attempt at adjustment or repair other than through
approved agents.
This guarantee does not affect your statutory rights.
For further information within and outside the 12
month guarantee, please refer to the full user guide at
www.bt.com/producthelp
Product disposal instructions
The symbol shown here and on the product
means that the product is classed as Electrical or
Electronic Equipment and should not be disposed with
other household or commercial waste at the end of its
working life.
The Waste of Electrical and Electronic Equipment
(WEEE) Directive (2002/96/EC) has been put in place
to recycle products using best available recovery and
recycling techniques to minimise the impact on the
environment, treat any hazardous substances and
avoid the increasing landll.
Product disposal instructions for residential users
When you have no further use for it, please remove
any batteries and dispose of them and the product as
per your local authority’s recycling processes. For more
information please contact your local authority or the
retailer where the product was purchased.
Product disposal instructions for business users
Business users should contact their suppliers and check
the terms and conditions of the purchase contract
and ensure that this product is not mixed with other
commercial waste for disposal.
Warning
This equipment is not designed for making
emergency telephone calls when the power fails.
Alternative arrangements should be made for
access to emergency services.
R&TTE Directive & Declaration
of Conformity
This product is intended for use within the UK for
connection to the public telephone network and
compatible switchboards.
This equipment complies with the essential
requirements for the Radio Equipment and
Telecommunications Terminal Equipment Directive
(1999/5/EC).
For a copy of the Declaration of Conformity
please refer to www.bt.com/producthelp
Setting up is easy. Just follow the simple steps in this guide.
If you need further assistance, please visit our website www.bt.com/producthelp
to view our advanced user guide or call our helpdesk on 0800 218 2182*
2 Charge
1 Activate batteries by pulling the
plastic tab away from the back of
the handset.
2 Place handset on base to charge.
3 After 16 hours, plug the telephone line
cord into the telephone wall socket.
Important: Charge the handset batteries for 16 hours
or your phone may not work.
Set up your additional handsets (multipacks only)
1 For each additional handset and charger: plug the mains power adaptor (item code
040371) into the socket on the underside of the charger and plug the other end
into the mains wall socket and switch the power on.
2 Activate batteries as shown above.
3 Place handset on the charger to charge for 16 hours.
If you ever need to remove the batteries, simply slide open the battery compartment
cover and insert your nger nail under the end of the batteries to pull them out.
Your BT Freestyle 350 is now ready for use.
2 Plug in mains power
adaptor (item code
042172). Secure power
adaptor cable behind
retaining clip on back
of base.
1 Plug in telephone line
cord but don’t plug the
other end into the wall
socket yet.
Please
turn
over
Important: Only use the cables and rechargeable batteries supplied in this box,
or this product may not work. Any replacement rechargeable batteries must be
of the same type.
Check box contents
3 Plug the other end of
the power adaptor
into the wall socket
and switch on.
Handset
Handset Charger
Mains power
adaptor (item code
042172)
Mains power
adaptor (item code
040371)
Telephone line
cord
2x AAA Ni-MH 750mAh
rechargeable batteries
(already in handset)
2x AAA Ni-MH 750mAh
rechargeable batteries
(already in handset)
Base
Contents for each additional handset (multipacks only)
1 Plug in
* Calls made from within the UK mainland network are free. Mobile and International call costs may vary.
BT &
Working together, supporting energy saving products
BT & British Gas have joined forces to help our customers nd new ways to save energy
around the home, so we can all do our bit for the environment & save money too!

16hrs
User Guide
BT Freestyle 350
Ofces worldwide
The services described in this publication are subject to availability and may be
modied from time to time. Services and equipment are supplied subject to
British Telecommunications plc’s respective standard conditions of contract.
Nothing in this publication forms any part of a contract.
© British Telecommunications plc 2008.
Registered Ofce: 81 Newgate Street, London EC1A 7AJ.
Registered in England No. 1800000.
Designed and produced by The Art & Design Partnership Ltd.
Printed in China / Issue 2 / ADP11-08
10%
1 Plug in
2 Charge
3 Go!
General information
For information on safety instructions,
cleaning, technical information or
connecting to a switchboard, please
refer to the ‘General Information’
section in the full user guide at
www.bt.com/producthelp
Guarantee
Your BT Freestyle 350 is guaranteed for a period of 12
months from the date of purchase.
Subject to the terms listed below, the guarantee
will provide for the repair of, or at BT’s or its agent’s
discretion the option to replace the BT Freestyle 350,
or any component thereof, (other than batteries),
which is identied as faulty or below standard, or as a
result of inferior workmanship or materials. Products
over 28 days old from the date of purchase may be
replaced with a refurbished or repaired product.
The conditions of this guarantee are:
• The guarantee shall only apply to defects that
occur within the 12 month guarantee period.
• Proof of purchase is required.
• The equipment is returned to BT or its agent
as instructed.
This guarantee does not cover any faults or defects
caused by accidents, misuse, fair wear and tear,
neglect, tampering with the equipment, or any
attempt at adjustment or repair other than through
approved agents.
This guarantee does not affect your statutory rights.
For further information within and outside the 12
month guarantee, please refer to the full user guide at
www.bt.com/producthelp
Product disposal instructions
The symbol shown here and on the product
means that the product is classed as Electrical or
Electronic Equipment and should not be disposed with
other household or commercial waste at the end of its
working life.
The Waste of Electrical and Electronic Equipment
(WEEE) Directive (2002/96/EC) has been put in place
to recycle products using best available recovery and
recycling techniques to minimise the impact on the
environment, treat any hazardous substances and
avoid the increasing landll.
Product disposal instructions for residential users
When you have no further use for it, please remove
any batteries and dispose of them and the product as
per your local authority’s recycling processes. For more
information please contact your local authority or the
retailer where the product was purchased.
Product disposal instructions for business users
Business users should contact their suppliers and check
the terms and conditions of the purchase contract
and ensure that this product is not mixed with other
commercial waste for disposal.
Warning
This equipment is not designed for making
emergency telephone calls when the power fails.
Alternative arrangements should be made for
access to emergency services.
R&TTE Directive & Declaration
of Conformity
This product is intended for use within the UK for
connection to the public telephone network and
compatible switchboards.
This equipment complies with the essential
requirements for the Radio Equipment and
Telecommunications Terminal Equipment Directive
(1999/5/EC).
For a copy of the Declaration of Conformity
please refer to www.bt.com/producthelp
Setting up is easy. Just follow the simple steps in this guide.
If you need further assistance, please visit our website www.bt.com/producthelp
to view our advanced user guide or call our helpdesk on 0800 218 2182*
2 Charge
1 Activate batteries by pulling the
plastic tab away from the back of
the handset.
2 Place handset on base to charge.
3 After 16 hours, plug the telephone line
cord into the telephone wall socket.
Important: Charge the handset batteries for 16 hours
or your phone may not work.
Set up your additional handsets (multipacks only)
1 For each additional handset and charger: plug the mains power adaptor (item code
040371) into the socket on the underside of the charger and plug the other end
into the mains wall socket and switch the power on.
2 Activate batteries as shown above.
3 Place handset on the charger to charge for 16 hours.
If you ever need to remove the batteries, simply slide open the battery compartment
cover and insert your nger nail under the end of the batteries to pull them out.
Your BT Freestyle 350 is now ready for use.
2 Plug in mains power
adaptor (item code
042172). Secure power
adaptor cable behind
retaining clip on back
of base.
1 Plug in telephone line
cord but don’t plug the
other end into the wall
socket yet.
Please
turn
over
Important: Only use the cables and rechargeable batteries supplied in this box,
or this product may not work. Any replacement rechargeable batteries must be
of the same type.
Check box contents
3 Plug the other end of
the power adaptor
into the wall socket
and switch on.
Handset
Handset Charger
Mains power
adaptor (item code
042172)
Mains power
adaptor (item code
040371)
Telephone line
cord
2x AAA Ni-MH 750mAh
rechargeable batteries
(already in handset)
2x AAA Ni-MH 750mAh
rechargeable batteries
(already in handset)
Base
Contents for each additional handset (multipacks only)
1 Plug in
* Calls made from within the UK mainland network are free. Mobile and International call costs may vary.
BT &
Working together, supporting energy saving products
BT & British Gas have joined forces to help our customers nd new ways to save energy
around the home, so we can all do our bit for the environment & save money too!

16hrs
User Guide
BT Freestyle 350
Ofces worldwide
The services described in this publication are subject to availability and may be
modied from time to time. Services and equipment are supplied subject to
British Telecommunications plc’s respective standard conditions of contract.
Nothing in this publication forms any part of a contract.
© British Telecommunications plc 2008.
Registered Ofce: 81 Newgate Street, London EC1A 7AJ.
Registered in England No. 1800000.
Designed and produced by The Art & Design Partnership Ltd.
Printed in China / Issue 2 / ADP11-08
10%
1 Plug in
2 Charge
3 Go!
General information
For information on safety instructions,
cleaning, technical information or
connecting to a switchboard, please
refer to the ‘General Information’
section in the full user guide at
www.bt.com/producthelp
Guarantee
Your BT Freestyle 350 is guaranteed for a period of 12
months from the date of purchase.
Subject to the terms listed below, the guarantee
will provide for the repair of, or at BT’s or its agent’s
discretion the option to replace the BT Freestyle 350,
or any component thereof, (other than batteries),
which is identied as faulty or below standard, or as a
result of inferior workmanship or materials. Products
over 28 days old from the date of purchase may be
replaced with a refurbished or repaired product.
The conditions of this guarantee are:
• The guarantee shall only apply to defects that
occur within the 12 month guarantee period.
• Proof of purchase is required.
• The equipment is returned to BT or its agent
as instructed.
This guarantee does not cover any faults or defects
caused by accidents, misuse, fair wear and tear,
neglect, tampering with the equipment, or any
attempt at adjustment or repair other than through
approved agents.
This guarantee does not affect your statutory rights.
For further information within and outside the 12
month guarantee, please refer to the full user guide at
www.bt.com/producthelp
Product disposal instructions
The symbol shown here and on the product
means that the product is classed as Electrical or
Electronic Equipment and should not be disposed with
other household or commercial waste at the end of its
working life.
The Waste of Electrical and Electronic Equipment
(WEEE) Directive (2002/96/EC) has been put in place
to recycle products using best available recovery and
recycling techniques to minimise the impact on the
environment, treat any hazardous substances and
avoid the increasing landll.
Product disposal instructions for residential users
When you have no further use for it, please remove
any batteries and dispose of them and the product as
per your local authority’s recycling processes. For more
information please contact your local authority or the
retailer where the product was purchased.
Product disposal instructions for business users
Business users should contact their suppliers and check
the terms and conditions of the purchase contract
and ensure that this product is not mixed with other
commercial waste for disposal.
Warning
This equipment is not designed for making
emergency telephone calls when the power fails.
Alternative arrangements should be made for
access to emergency services.
R&TTE Directive & Declaration
of Conformity
This product is intended for use within the UK for
connection to the public telephone network and
compatible switchboards.
This equipment complies with the essential
requirements for the Radio Equipment and
Telecommunications Terminal Equipment Directive
(1999/5/EC).
For a copy of the Declaration of Conformity
please refer to www.bt.com/producthelp
Setting up is easy. Just follow the simple steps in this guide.
If you need further assistance, please visit our website www.bt.com/producthelp
to view our advanced user guide or call our helpdesk on 0800 218 2182*
2 Charge
1 Activate batteries by pulling the
plastic tab away from the back of
the handset.
2 Place handset on base to charge.
3 After 16 hours, plug the telephone line
cord into the telephone wall socket.
Important: Charge the handset batteries for 16 hours
or your phone may not work.
Set up your additional handsets (multipacks only)
1 For each additional handset and charger: plug the mains power adaptor (item code
040371) into the socket on the underside of the charger and plug the other end
into the mains wall socket and switch the power on.
2 Activate batteries as shown above.
3 Place handset on the charger to charge for 16 hours.
If you ever need to remove the batteries, simply slide open the battery compartment
cover and insert your nger nail under the end of the batteries to pull them out.
Your BT Freestyle 350 is now ready for use.
2 Plug in mains power
adaptor (item code
042172). Secure power
adaptor cable behind
retaining clip on back
of base.
1 Plug in telephone line
cord but don’t plug the
other end into the wall
socket yet.
Please
turn
over
Important: Only use the cables and rechargeable batteries supplied in this box,
or this product may not work. Any replacement rechargeable batteries must be
of the same type.
Check box contents
3 Plug the other end of
the power adaptor
into the wall socket
and switch on.
Handset
Handset Charger
Mains power
adaptor (item code
042172)
Mains power
adaptor (item code
040371)
Telephone line
cord
2x AAA Ni-MH 750mAh
rechargeable batteries
(already in handset)
2x AAA Ni-MH 750mAh
rechargeable batteries
(already in handset)
Base
Contents for each additional handset (multipacks only)
1 Plug in
* Calls made from within the UK mainland network are free. Mobile and International call costs may vary.
BT &
Working together, supporting energy saving products
BT & British Gas have joined forces to help our customers nd new ways to save energy
around the home, so we can all do our bit for the environment & save money too!

Answering machine
Your answering machine is on and ready to record messages. The controls are shown in
the base diagram to the bottom left. You can also access the answer machine features
through the handset menu.
For detailed instructions on all the answering machine features see the full user
guide online at www.bt.com/producthelp
Recording your own outgoing message
Press Menu, scroll to
Answer machine menu, press OK.
Scroll or to
Answer settings , press OK.
Scroll or to
Outgoing message , press OK. Record OGM is highlighted, press OK.
Scroll or to highlight
Answer & record or Answer only , press OK.
Speak your message after the announcement. To stop recording, press Save.
Your message is played back to you.
Set answer delay
Press Menu, scroll to
Answer machine menu, press OK.
Scroll or to
Answer settings , press OK. Scroll or to Answer delay , press OK.
Current setting is highlighted. Scroll or to select the number of rings or time
saver, press OK to conrm.
Text messaging
Before sending and receiving text messages you need to register to the text
messaging service and subscribe to Caller Display. You will be automatically registered
to the text message service when you send your rst text. Please note that some
other network provider lines may not be compatible with this text messaging service.
See the full user guide online at www.bt.com/producthelp for details.
3 Go!
Set date and time
Press Menu, scroll to Settings menu, press OK.
Press until you scroll down to
Date/Time , press OK.
Enter the date using the format (DD/MM/YY), press OK.
Enter the time using the format (HH/MM), press OK.
Making calls
Press then dial the phone number. Press to end the call.
Answering calls
If you have subscribed to Caller Display, the caller’s details will be displayed before you
answer (see the full user guide online at www.bt.com/producthelp for details).
Lift the handset from the base or charger to answer incoming calls. If the handset is not
on the base or charger, press .
Handsfree
Press during a call to switch the call to loudspeaker.
Secrecy (Mute)
Press during a call to activate secrecy mode. Press again to resume your call.
Redial
Press , scroll or through the list to the number you want.
Press to redial the number displayed.
Directory
Storing new directory entries (up to 100)
Press to open the directory. When storing the rst entry, Empty is displayed.
Otherwise, the rst entry in the directory is displayed.
Press Opt.
New entry is highlighted. Press OK.
Using the keypad, enter the telephone number (including area code) and press OK.
Using the letters on the keypad, enter the name. You may need to press the same button
a few times until the letter you want is displayed. For example, press once for
A ,or
twice for B . If you make a mistake, press Del. Press to switch between upper case/
lower case and digits, and to enter a space.
Press Save. The entry is saved in the directory.
Dialling a directory entry
Press . The rst entry is displayed.
Press or to scroll to the entry you want.
Press to dial.
Caller Display and the Calls list
You must subscribe to a Caller Display service for this feature to work. Your network
provider may charge you for this service.
When you have new, unanswered calls in the calls list, the display will show
New calls .
View and dial from the Calls list
Press to open the calls list.
The most recent missed call is displayed. Press or to scroll through the list.
Press to dial the number displayed.
Or, press Opt to access further options e.g. view call details, save number or delete
entries.
Find out more
• New Frequently Asked Questions available at www.bt.com/producthelp
• If you need more detailed instructions, a full user guide is available to
download from www.bt.com/producthelp
• If you cannot nd the answer to your problem in the full online
user guide, then please call the free Helpline on 0800 218 2182*
or email [e-mail]. Our dedicated advisors are more
likely to be able to help you than the retailer where you made your purchase.
Your phone
Handset
Base Help
Most problems can be xed with a few simple checks.
Problem Solution
No dial tone Only use the cables and batteries supplied.
Make sure both the mains power adaptor cable and
telephone line cord are plugged into the correct sockets.
Poor speech quality Make sure the product is not located too close to other
electrical appliances. This can also help improve the
handset range from the base.
Battery icon ashing/
handset dead
Make sure you charge the batteries for 16 hours before use
to ensure maximum battery performance.
Using broadband on the same
phone line?
Make sure you plug the phone
into the wall socket via an ADSL
microlter (not supplied), otherwise
you may have problems with this
product and your broadband service. ADSL
microlter
Open and scroll through
Calls list.
Increase earpiece
or speaker volume.
Scroll up through
menu options.
Select options shown
on the display above
each button.
During a call, press to
switch secrecy on/off.
Activate handsfree
(loudspeaker) mode.
Open and scroll through
redial list.
Decrease earpiece or
speaker volume.
Scroll down through
menu options.
Make and receive calls.
Access SMS texts, Calls lists,
and BT services.
Recall for use with
switchboards.
In standby mode, press
to access the directory.
In menu mode, press to
scroll through the
menu options.
End a call.
Press and hold to switch
handset off.
Return to standby.
Press and hold to lock/
unlock keypad.
Press to ring /
nd the
handset(s).
BT Freestyle
Switch answer
machine
on/off.
On = power on
Flashing = line in use.
Stop message
playback.
Play messages.
Press once to
repeat current
message, twice
to play previous
message.
Delete
messages.
Message counter
Play next
message.
Adjust speaker
volume during
playback.
Press and hold to switch
handset ringer on / off.
When entering text,
switches between upper
and lower case letters.
SMS LED
Indicates new text
messages received.

Answering machine
Your answering machine is on and ready to record messages. The controls are shown in
the base diagram to the bottom left. You can also access the answer machine features
through the handset menu.
For detailed instructions on all the answering machine features see the full user
guide online at www.bt.com/producthelp
Recording your own outgoing message
Press Menu, scroll to
Answer machine menu, press OK.
Scroll or to
Answer settings , press OK.
Scroll or to
Outgoing message , press OK. Record OGM is highlighted, press OK.
Scroll or to highlight
Answer & record or Answer only , press OK.
Speak your message after the announcement. To stop recording, press Save.
Your message is played back to you.
Set answer delay
Press Menu, scroll to
Answer machine menu, press OK.
Scroll or to
Answer settings , press OK. Scroll or to Answer delay , press OK.
Current setting is highlighted. Scroll or to select the number of rings or time
saver, press OK to conrm.
Text messaging
Before sending and receiving text messages you need to register to the text
messaging service and subscribe to Caller Display. You will be automatically registered
to the text message service when you send your rst text. Please note that some
other network provider lines may not be compatible with this text messaging service.
See the full user guide online at www.bt.com/producthelp for details.
3 Go!
Set date and time
Press Menu, scroll to Settings menu, press OK.
Press until you scroll down to
Date/Time , press OK.
Enter the date using the format (DD/MM/YY), press OK.
Enter the time using the format (HH/MM), press OK.
Making calls
Press then dial the phone number. Press to end the call.
Answering calls
If you have subscribed to Caller Display, the caller’s details will be displayed before you
answer (see the full user guide online at www.bt.com/producthelp for details).
Lift the handset from the base or charger to answer incoming calls. If the handset is not
on the base or charger, press .
Handsfree
Press during a call to switch the call to loudspeaker.
Secrecy (Mute)
Press during a call to activate secrecy mode. Press again to resume your call.
Redial
Press , scroll or through the list to the number you want.
Press to redial the number displayed.
Directory
Storing new directory entries (up to 100)
Press to open the directory. When storing the rst entry, Empty is displayed.
Otherwise, the rst entry in the directory is displayed.
Press Opt.
New entry is highlighted. Press OK.
Using the keypad, enter the telephone number (including area code) and press OK.
Using the letters on the keypad, enter the name. You may need to press the same button
a few times until the letter you want is displayed. For example, press once for
A ,or
twice for B . If you make a mistake, press Del. Press to switch between upper case/
lower case and digits, and to enter a space.
Press Save. The entry is saved in the directory.
Dialling a directory entry
Press . The rst entry is displayed.
Press or to scroll to the entry you want.
Press to dial.
Caller Display and the Calls list
You must subscribe to a Caller Display service for this feature to work. Your network
provider may charge you for this service.
When you have new, unanswered calls in the calls list, the display will show
New calls .
View and dial from the Calls list
Press to open the calls list.
The most recent missed call is displayed. Press or to scroll through the list.
Press to dial the number displayed.
Or, press Opt to access further options e.g. view call details, save number or delete
entries.
Find out more
• New Frequently Asked Questions available at www.bt.com/producthelp
• If you need more detailed instructions, a full user guide is available to
download from www.bt.com/producthelp
• If you cannot nd the answer to your problem in the full online
user guide, then please call the free Helpline on 0800 218 2182*
or email [e-mail]. Our dedicated advisors are more
likely to be able to help you than the retailer where you made your purchase.
Your phone
Handset
Base Help
Most problems can be xed with a few simple checks.
Problem Solution
No dial tone Only use the cables and batteries supplied.
Make sure both the mains power adaptor cable and
telephone line cord are plugged into the correct sockets.
Poor speech quality Make sure the product is not located too close to other
electrical appliances. This can also help improve the
handset range from the base.
Battery icon ashing/
handset dead
Make sure you charge the batteries for 16 hours before use
to ensure maximum battery performance.
Using broadband on the same
phone line?
Make sure you plug the phone
into the wall socket via an ADSL
microlter (not supplied), otherwise
you may have problems with this
product and your broadband service. ADSL
microlter
Open and scroll through
Calls list.
Increase earpiece
or speaker volume.
Scroll up through
menu options.
Select options shown
on the display above
each button.
During a call, press to
switch secrecy on/off.
Activate handsfree
(loudspeaker) mode.
Open and scroll through
redial list.
Decrease earpiece or
speaker volume.
Scroll down through
menu options.
Make and receive calls.
Access SMS texts, Calls lists,
and BT services.
Recall for use with
switchboards.
In standby mode, press
to access the directory.
In menu mode, press to
scroll through the
menu options.
End a call.
Press and hold to switch
handset off.
Return to standby.
Press and hold to lock/
unlock keypad.
Press to ring /
nd the
handset(s).
BT Freestyle
Switch answer
machine
on/off.
On = power on
Flashing = line in use.
Stop message
playback.
Play messages.
Press once to
repeat current
message, twice
to play previous
message.
Delete
messages.
Message counter
Play next
message.
Adjust speaker
volume during
playback.
Press and hold to switch
handset ringer on / off.
When entering text,
switches between upper
and lower case letters.
SMS LED
Indicates new text
messages received.

16hrs
User Guide
BT Freestyle 350
Ofces worldwide
The services described in this publication are subject to availability and may be
modied from time to time. Services and equipment are supplied subject to
British Telecommunications plc’s respective standard conditions of contract.
Nothing in this publication forms any part of a contract.
© British Telecommunications plc 2008.
Registered Ofce: 81 Newgate Street, London EC1A 7AJ.
Registered in England No. 1800000.
Designed and produced by The Art & Design Partnership Ltd.
Printed in China / Issue 2 / ADP11-08
10%
1 Plug in
2 Charge
3 Go!
General information
For information on safety instructions,
cleaning, technical information or
connecting to a switchboard, please
refer to the ‘General Information’
section in the full user guide at
www.bt.com/producthelp
Guarantee
Your BT Freestyle 350 is guaranteed for a period of 12
months from the date of purchase.
Subject to the terms listed below, the guarantee
will provide for the repair of, or at BT’s or its agent’s
discretion the option to replace the BT Freestyle 350,
or any component thereof, (other than batteries),
which is identied as faulty or below standard, or as a
result of inferior workmanship or materials. Products
over 28 days old from the date of purchase may be
replaced with a refurbished or repaired product.
The conditions of this guarantee are:
• The guarantee shall only apply to defects that
occur within the 12 month guarantee period.
• Proof of purchase is required.
• The equipment is returned to BT or its agent
as instructed.
This guarantee does not cover any faults or defects
caused by accidents, misuse, fair wear and tear,
neglect, tampering with the equipment, or any
attempt at adjustment or repair other than through
approved agents.
This guarantee does not affect your statutory rights.
For further information within and outside the 12
month guarantee, please refer to the full user guide at
www.bt.com/producthelp
Product disposal instructions
The symbol shown here and on the product
means that the product is classed as Electrical or
Electronic Equipment and should not be disposed with
other household or commercial waste at the end of its
working life.
The Waste of Electrical and Electronic Equipment
(WEEE) Directive (2002/96/EC) has been put in place
to recycle products using best available recovery and
recycling techniques to minimise the impact on the
environment, treat any hazardous substances and
avoid the increasing landll.
Product disposal instructions for residential users
When you have no further use for it, please remove
any batteries and dispose of them and the product as
per your local authority’s recycling processes. For more
information please contact your local authority or the
retailer where the product was purchased.
Product disposal instructions for business users
Business users should contact their suppliers and check
the terms and conditions of the purchase contract
and ensure that this product is not mixed with other
commercial waste for disposal.
Warning
This equipment is not designed for making
emergency telephone calls when the power fails.
Alternative arrangements should be made for
access to emergency services.
R&TTE Directive & Declaration
of Conformity
This product is intended for use within the UK for
connection to the public telephone network and
compatible switchboards.
This equipment complies with the essential
requirements for the Radio Equipment and
Telecommunications Terminal Equipment Directive
(1999/5/EC).
For a copy of the Declaration of Conformity
please refer to www.bt.com/producthelp
Setting up is easy. Just follow the simple steps in this guide.
If you need further assistance, please visit our website www.bt.com/producthelp
to view our advanced user guide or call our helpdesk on 0800 218 2182*
2 Charge
1 Activate batteries by pulling the
plastic tab away from the back of
the handset.
2 Place handset on base to charge.
3 After 16 hours, plug the telephone line
cord into the telephone wall socket.
Important: Charge the handset batteries for 16 hours
or your phone may not work.
Set up your additional handsets (multipacks only)
1 For each additional handset and charger: plug the mains power adaptor (item code
040371) into the socket on the underside of the charger and plug the other end
into the mains wall socket and switch the power on.
2 Activate batteries as shown above.
3 Place handset on the charger to charge for 16 hours.
If you ever need to remove the batteries, simply slide open the battery compartment
cover and insert your nger nail under the end of the batteries to pull them out.
Your BT Freestyle 350 is now ready for use.
2 Plug in mains power
adaptor (item code
042172). Secure power
adaptor cable behind
retaining clip on back
of base.
1 Plug in telephone line
cord but don’t plug the
other end into the wall
socket yet.
Please
turn
over
Important: Only use the cables and rechargeable batteries supplied in this box,
or this product may not work. Any replacement rechargeable batteries must be
of the same type.
Check box contents
3 Plug the other end of
the power adaptor
into the wall socket
and switch on.
Handset
Handset Charger
Mains power
adaptor (item code
042172)
Mains power
adaptor (item code
040371)
Telephone line
cord
2x AAA Ni-MH 750mAh
rechargeable batteries
(already in handset)
2x AAA Ni-MH 750mAh
rechargeable batteries
(already in handset)
Base
Contents for each additional handset (multipacks only)
1 Plug in
* Calls made from within the UK mainland network are free. Mobile and International call costs may vary.
BT &
Working together, supporting energy saving products
BT & British Gas have joined forces to help our customers nd new ways to save energy
around the home, so we can all do our bit for the environment & save money too!

16hrs
User Guide
BT Freestyle 350
Ofces worldwide
The services described in this publication are subject to availability and may be
modied from time to time. Services and equipment are supplied subject to
British Telecommunications plc’s respective standard conditions of contract.
Nothing in this publication forms any part of a contract.
© British Telecommunications plc 2008.
Registered Ofce: 81 Newgate Street, London EC1A 7AJ.
Registered in England No. 1800000.
Designed and produced by The Art & Design Partnership Ltd.
Printed in China / Issue 2 / ADP11-08
10%
1 Plug in
2 Charge
3 Go!
General information
For information on safety instructions,
cleaning, technical information or
connecting to a switchboard, please
refer to the ‘General Information’
section in the full user guide at
www.bt.com/producthelp
Guarantee
Your BT Freestyle 350 is guaranteed for a period of 12
months from the date of purchase.
Subject to the terms listed below, the guarantee
will provide for the repair of, or at BT’s or its agent’s
discretion the option to replace the BT Freestyle 350,
or any component thereof, (other than batteries),
which is identied as faulty or below standard, or as a
result of inferior workmanship or materials. Products
over 28 days old from the date of purchase may be
replaced with a refurbished or repaired product.
The conditions of this guarantee are:
• The guarantee shall only apply to defects that
occur within the 12 month guarantee period.
• Proof of purchase is required.
• The equipment is returned to BT or its agent
as instructed.
This guarantee does not cover any faults or defects
caused by accidents, misuse, fair wear and tear,
neglect, tampering with the equipment, or any
attempt at adjustment or repair other than through
approved agents.
This guarantee does not affect your statutory rights.
For further information within and outside the 12
month guarantee, please refer to the full user guide at
www.bt.com/producthelp
Product disposal instructions
The symbol shown here and on the product
means that the product is classed as Electrical or
Electronic Equipment and should not be disposed with
other household or commercial waste at the end of its
working life.
The Waste of Electrical and Electronic Equipment
(WEEE) Directive (2002/96/EC) has been put in place
to recycle products using best available recovery and
recycling techniques to minimise the impact on the
environment, treat any hazardous substances and
avoid the increasing landll.
Product disposal instructions for residential users
When you have no further use for it, please remove
any batteries and dispose of them and the product as
per your local authority’s recycling processes. For more
information please contact your local authority or the
retailer where the product was purchased.
Product disposal instructions for business users
Business users should contact their suppliers and check
the terms and conditions of the purchase contract
and ensure that this product is not mixed with other
commercial waste for disposal.
Warning
This equipment is not designed for making
emergency telephone calls when the power fails.
Alternative arrangements should be made for
access to emergency services.
R&TTE Directive & Declaration
of Conformity
This product is intended for use within the UK for
connection to the public telephone network and
compatible switchboards.
This equipment complies with the essential
requirements for the Radio Equipment and
Telecommunications Terminal Equipment Directive
(1999/5/EC).
For a copy of the Declaration of Conformity
please refer to www.bt.com/producthelp
Setting up is easy. Just follow the simple steps in this guide.
If you need further assistance, please visit our website www.bt.com/producthelp
to view our advanced user guide or call our helpdesk on 0800 218 2182*
2 Charge
1 Activate batteries by pulling the
plastic tab away from the back of
the handset.
2 Place handset on base to charge.
3 After 16 hours, plug the telephone line
cord into the telephone wall socket.
Important: Charge the handset batteries for 16 hours
or your phone may not work.
Set up your additional handsets (multipacks only)
1 For each additional handset and charger: plug the mains power adaptor (item code
040371) into the socket on the underside of the charger and plug the other end
into the mains wall socket and switch the power on.
2 Activate batteries as shown above.
3 Place handset on the charger to charge for 16 hours.
If you ever need to remove the batteries, simply slide open the battery compartment
cover and insert your nger nail under the end of the batteries to pull them out.
Your BT Freestyle 350 is now ready for use.
2 Plug in mains power
adaptor (item code
042172). Secure power
adaptor cable behind
retaining clip on back
of base.
1 Plug in telephone line
cord but don’t plug the
other end into the wall
socket yet.
Please
turn
over
Important: Only use the cables and rechargeable batteries supplied in this box,
or this product may not work. Any replacement rechargeable batteries must be
of the same type.
Check box contents
3 Plug the other end of
the power adaptor
into the wall socket
and switch on.
Handset
Handset Charger
Mains power
adaptor (item code
042172)
Mains power
adaptor (item code
040371)
Telephone line
cord
2x AAA Ni-MH 750mAh
rechargeable batteries
(already in handset)
2x AAA Ni-MH 750mAh
rechargeable batteries
(already in handset)
Base
Contents for each additional handset (multipacks only)
1 Plug in
* Calls made from within the UK mainland network are free. Mobile and International call costs may vary.
BT &
Working together, supporting energy saving products
BT & British Gas have joined forces to help our customers nd new ways to save energy
around the home, so we can all do our bit for the environment & save money too!

16hrs
User Guide
BT Freestyle 350
Ofces worldwide
The services described in this publication are subject to availability and may be
modied from time to time. Services and equipment are supplied subject to
British Telecommunications plc’s respective standard conditions of contract.
Nothing in this publication forms any part of a contract.
© British Telecommunications plc 2008.
Registered Ofce: 81 Newgate Street, London EC1A 7AJ.
Registered in England No. 1800000.
Designed and produced by The Art & Design Partnership Ltd.
Printed in China / Issue 2 / ADP11-08
10%
1 Plug in
2 Charge
3 Go!
General information
For information on safety instructions,
cleaning, technical information or
connecting to a switchboard, please
refer to the ‘General Information’
section in the full user guide at
www.bt.com/producthelp
Guarantee
Your BT Freestyle 350 is guaranteed for a period of 12
months from the date of purchase.
Subject to the terms listed below, the guarantee
will provide for the repair of, or at BT’s or its agent’s
discretion the option to replace the BT Freestyle 350,
or any component thereof, (other than batteries),
which is identied as faulty or below standard, or as a
result of inferior workmanship or materials. Products
over 28 days old from the date of purchase may be
replaced with a refurbished or repaired product.
The conditions of this guarantee are:
• The guarantee shall only apply to defects that
occur within the 12 month guarantee period.
• Proof of purchase is required.
• The equipment is returned to BT or its agent
as instructed.
This guarantee does not cover any faults or defects
caused by accidents, misuse, fair wear and tear,
neglect, tampering with the equipment, or any
attempt at adjustment or repair other than through
approved agents.
This guarantee does not affect your statutory rights.
For further information within and outside the 12
month guarantee, please refer to the full user guide at
www.bt.com/producthelp
Product disposal instructions
The symbol shown here and on the product
means that the product is classed as Electrical or
Electronic Equipment and should not be disposed with
other household or commercial waste at the end of its
working life.
The Waste of Electrical and Electronic Equipment
(WEEE) Directive (2002/96/EC) has been put in place
to recycle products using best available recovery and
recycling techniques to minimise the impact on the
environment, treat any hazardous substances and
avoid the increasing landll.
Product disposal instructions for residential users
When you have no further use for it, please remove
any batteries and dispose of them and the product as
per your local authority’s recycling processes. For more
information please contact your local authority or the
retailer where the product was purchased.
Product disposal instructions for business users
Business users should contact their suppliers and check
the terms and conditions of the purchase contract
and ensure that this product is not mixed with other
commercial waste for disposal.
Warning
This equipment is not designed for making
emergency telephone calls when the power fails.
Alternative arrangements should be made for
access to emergency services.
R&TTE Directive & Declaration
of Conformity
This product is intended for use within the UK for
connection to the public telephone network and
compatible switchboards.
This equipment complies with the essential
requirements for the Radio Equipment and
Telecommunications Terminal Equipment Directive
(1999/5/EC).
For a copy of the Declaration of Conformity
please refer to www.bt.com/producthelp
Setting up is easy. Just follow the simple steps in this guide.
If you need further assistance, please visit our website www.bt.com/producthelp
to view our advanced user guide or call our helpdesk on 0800 218 2182*
2 Charge
1 Activate batteries by pulling the
plastic tab away from the back of
the handset.
2 Place handset on base to charge.
3 After 16 hours, plug the telephone line
cord into the telephone wall socket.
Important: Charge the handset batteries for 16 hours
or your phone may not work.
Set up your additional handsets (multipacks only)
1 For each additional handset and charger: plug the mains power adaptor (item code
040371) into the socket on the underside of the charger and plug the other end
into the mains wall socket and switch the power on.
2 Activate batteries as shown above.
3 Place handset on the charger to charge for 16 hours.
If you ever need to remove the batteries, simply slide open the battery compartment
cover and insert your nger nail under the end of the batteries to pull them out.
Your BT Freestyle 350 is now ready for use.
2 Plug in mains power
adaptor (item code
042172). Secure power
adaptor cable behind
retaining clip on back
of base.
1 Plug in telephone line
cord but don’t plug the
other end into the wall
socket yet.
Please
turn
over
Important: Only use the cables and rechargeable batteries supplied in this box,
or this product may not work. Any replacement rechargeable batteries must be
of the same type.
Check box contents
3 Plug the other end of
the power adaptor
into the wall socket
and switch on.
Handset
Handset Charger
Mains power
adaptor (item code
042172)
Mains power
adaptor (item code
040371)
Telephone line
cord
2x AAA Ni-MH 750mAh
rechargeable batteries
(already in handset)
2x AAA Ni-MH 750mAh
rechargeable batteries
(already in handset)
Base
Contents for each additional handset (multipacks only)
1 Plug in
* Calls made from within the UK mainland network are free. Mobile and International call costs may vary.
BT &
Working together, supporting energy saving products
BT & British Gas have joined forces to help our customers nd new ways to save energy
around the home, so we can all do our bit for the environment & save money too!