Bticino Legrand MyHOME Up User manual

MyHOMEServer1
Installation Manual
www.homesystems-legrandgroup.com
DEVICE ID:
0000000
INSTALLER CODE:
00000000

DEVICE ID:
0000000
INSTALLER CODE:
00000000
MyHOMEServer1
Installation Manual
2

MyHOMEServer1
Installation Manual
32
Contents General information 5
Warnings and recommendations 5
Function limits 7
MyHOMEServer1 connections 7
Light and Automation Devices that can be directly associated via MyHOMEServer1 8
Temperature Control Devices that can be directly associated via MyHOMEServer1 10
Description 11
Wiring diagrams 12
Connections 12
Access to the system 13
Connection to the system 14
Home page 17
Zones 19
Rooms 23
Objects 27
Associate the objects 30
Light object 32
On-Off Light 32
Dimmer 40
Coloured light 49
Rolling shutter object 54
Thermostat object (without control unit) 62
Thermostat object (with 99 zone control unit item 3550) 87
Player object 89
Smart TV object 92
Controlled socket object 98
Door lock object 105
Audio MyHOME object 113
Energy object 115
Burglar-alarm Zone Object 117
Scenarios 119
Createte a Scenario 120
Perform a Scenario 129
Manage a Scenario 142
Share a Scenario 145
Favourites 146
Add an object to the favourites 146
Add a Scenario to the favourites 147
Add a general control to the favourites 148
Burglar-alarm system 149
Faults 150
Partitions 151

MyHOMEServer1
Installation Manual
4
Settings 152
System check 152
Associations 156
Groups 162
General controls 165
System 167
Burglar-alarm system 168
Weather 170
Geolocation 173
Network 174
Email 175
Date and time 176
System reset 178
Disconnect 179
Maintenance 180
What to do if 182

MyHOMEServer1
Installation Manual
54
General information
Warnings and recommendations
It is important to read this manual carefully before proceeding with the installation. The warranty
becomes automatically void in case of negligence, improper use, tampering by unauthorised
personnel.
Note: a home Wi-Fi network with internet access is needed for the connection with INSTALLER CODE
and, also, the smartphone and the MyHOMEServer1 must be connected to the same LAN network.
To use the service, the Customer must acquire the technical equipment which allows access to the
Internet, on the basis of an agreement made by the Customer himself with an ISP (Internet Service
Provider). BTicino plays no part in this.
To use the normal MyHOMEServer1 basic functions, the Customer must install MyHOME_Up on his
smartphone.
The services offered by means of the APP require being able to interact with MyHOMEServer1 remotely
and through the Internet.
In these cases the integration and good working between MyHOMEServer1 and APP may depend on:
– a) quality of the Wi-Fi signal;
– b) type of access contract to the home internet;
– c) type of data contract on the smartphone.
When one of these 3 elements does not conform with the specifications required for product operation,
BTicino accepts no responsibility for any faults.
We would like to inform you that the service provided by BTicino by means of remote use via the APP
involves the use of data. The cost linked to data usage depends on the type of contract which the
customer has with his ISP (Internet Service Provider) and is solely the customer’s responsibility.
Although the system manages devices from third parties, the home-automation system must be
BTicino.
Caution: not all the functions shown in this manual are available for all countries.
Check with your retailer which functions are available for your market.
Warning: the images of this manual are only indicative, and therefore may not exactly represent the
characteristics of the product.

MyHOMEServer1
Installation Manual
6
By means of the interaction between the MyHOMEServer1 device, the MyHOME_Up App and
the home-automation system, the MyHOME_Up system (suitably configured) allows the user to
interact with his home, to:
– control the lights;
– control the rolling shutters;
– adjust the temperature;
– play music or listen to the radio;
– control the controlled socket;
– display the instantaneous consumptions of the loads (washing machine, cooker etc.);
– control the devices of other brands* (Samsung TV, Philips ecc...);
– open door locks;
– listen to the music from the MyHOME sound system;
– switch the Burglar Alarm system on/off using the insertion scenarios, activate partitions,
exclude zones and display events and faults;
– create and manage scenarios.
*Note: the device may not be compatible with some models or their firmware versions. Bticino is not
responsible for any present and future malfunctionings or incompatibilities which can be attributed to
third-party devices.
MyHOMEServer1
DEVICE ID:
0000000
INSTALLER CODE:
00000000

MyHOMEServer1
Installation Manual
76
10 Maximum number of areas that can be created
30 Maximum number of configurable rooms for each area
50 Maximum number of graphic objects in a room
50 Maximum number of controls which can be associated to an actuator
50 Maximum number of objects in the Favourites page
50 Maximum number of scenarios
100 Maximum number of actions in the scenario
50 Maximum number of start conditions for each scenario
25
Maximum number of user account
(The admin user can create up to 25 user accounts (email / password) for all the
people authorized to control the system.)
7Maximum number of locally simultaneously connected users
4Maximum number of remotely simultaneously connected users
25 Maximum number of saved connections on the App.
(Connections to the same gateway or to different gateways).
Function limits
Services Addresses Door Protocols
Cloud Services
Main Server myhomeup.bticino.com 8000 https, wss
Slave Server '193.178.246.170, 193.178.246.164 22 ssh
NTP Service pool.ntp.org
(by default, to be changed by the user) 123 ntp
Log Service log.bs.iotleg.com 5001 syslog
Update service
Update Server dispatchregistration.legrand.com 443 https
Download Server
prodlegrandressourcespkg.blob.core.windows.net 443 https
Weather service
Old Service
(market versions < 2.2.X) api.wunderground.com 443 https
New Service
(market versions > 2.1.X) api.openweathermap.org 443 https
Push notification services
Apple api.push.apple.com 443 https
Goole android.googleapis.com 443 https
Email service Depending on the user configuration
MyHOMEServer1 connections

MyHOMEServer1
Installation Manual
8
Light and Automation Devices that can be directly associated via MyHOMEServer1
Description Legrand
code
From
production
batch:
Channels
configured
automatically by
MyHOMEServer1
BTicino code
From
production
batch:
Channels
configured
automatically by
MyHOMEServer1
Scenario control
LG-573902
LG-573903
LG-574503
LG-574504
LG-067217
LG-067218
LG-078478
LG-079178
08W51
08W51
all
all
all
all
all
all
BT-L4680
BT-N4680
BT-NT4680
BT-HC4680
BT-HD4680
BT-HS4680
09W08
09W08
09W08
09W08
09W08
09W08
SCS/SCS interface LG-003562 12W20 BT-F422 12W20
Touch multifunction control
LG-067243
LG-067244
LG-067245
13W05
13W05
13W05
BUS 8-key control LG-067592 all BT-LN4652
BT-H4652
all
all
2 m basic control LG-067552 all
AR-64360
BT-H4652/2
BT-L4652/2
BT-AM5832/22
09W40
09W40
09W40
09W40
3 m basic control LG-067554 all
BT-L4652/3
BT-H4652/3
BT-AM5832/3
09W40
09W40
09W40
BUS shutter actuator LG-067557 all 1
BT-LN4661M2
BT-H4661M2
BT-AM5861M2
all
all
all
1
1
1
BUS shutter control LG-067558 all
BT-LN4660M2
BT-H4660M2
BT-AM5860M2
all
all
all
Special control LG-067553 all
AR-64362
BT-L4651M2
BT-H4651M2
BT-AM5831M2
all
08W41
08W41
08W41
16A 100/240V 1 relay DIN actuator LG-003847 all 1 BT-F411U1 all 1
16A 100/240V 2 relay DIN actuator LG-003848 all 2 BT-F411U2 all 2
16A 100/240V 1 relay DIN actuator LG-003841 10W17 1 BT-F411/1N 09W13 1
16A 2 relay DIN actuator LG-003842 10W18** 2 BT-F411/2 09W04** 2
16A 100/240V 2 relay DIN actuator LG-002601 all 2 BT-BMSW1002 all 2
16A 100/240V 4 relay DIN actuator LG-002602 all 4 BT-BMSW1003 all 4
6A 4 relay DIN actuator LG-003844 10W22* 4 BT-F411/4 09W04* 4
16A 100/240V 8 relay DIN actuator LG-002604 all 8 BT-BMSW1005 all 8
4 output DIN actuator for 0-10V
ballast LG-002612 all 4 BT-BMDI1002 all 4
DIN actuator for 0-10V ballast LG-003656 10W05 1 BT-F413N 09W14 1
Basic contact interface LG-573996 10W04 BT-3477 10W04
DIN contact interface LG-003553 10W13 BT-F428 09W50

MyHOMEServer1
Installation Manual
98
Description Legrand
code
From
production
batch:
Channels
configured
automatically by
MyHOMEServer1
BTicino code
From
production
batch:
Channels
configured
automatically by
MyHOMEServer1
DIN 1000 dimmer LG-002621 all 1 BT-F416U1 all 1
1000 W DIN dimmer LG-003652 09W50 1 BT-F414 09W29 1
400 VA DIN dimmer LG-003653 10W07 1 BT-F415 09W22 1
2 x 400 VA DIN dimmer LG-002622 all 2 BT-F417U2 all 2
300 VA DIN dimmer LG-003665 all 1 BT-F418 all 1
2 x 300 VA DIN dimmer LG-003651 all 2 BT-F418U2 all 2
3 m touch control LG-573912
LG-573913
11W27
11W09
BT-HC4657M3
BT-HD4657M3
BT-HS4657M3
11W09
11W12
11W12
4 m touch control
BT-HC4657M4
BT-HD4657M4
BT-HS4657M4
11W12
11W12
11W14
SCS/DALI interface LG-002631 10W13 8 BT-F429 10W20 8
Basic actuator BT-3475 12W31 1
BUS shutter DIN actuator LG-003666 all 1 BT-F401 all 1
Control actuator
LG-067561
AR-64195
AR-64196
AR-64393
all
all
all
all
2
2
2
2
BT-AM5852M2
BT-H4672M2
BT-LN4672M2
all
all
all
2
2
2
Basic control actuator BT-3476 12W39 1
Control actuator LG-067556 all 2 BT-LN4671M2 all 2
DIN dimmer for 0-10 V ballast LG-002611 all 1 BT-BMDI1001 all 1
BUS Dual Tech Green Switch
LG-067226
LG-078486
LG-574048
LG-574098
all
all
all
all
BT-L4658N
BT-N4658N
BT-NT4658N
BT-HC4658
BT-HD4658
BT-HS4658
all
all
all
all
all
all
PIR BUS automatic switch
LG-067225
LG-078485
LG-574046
LG-574096
all
all
all
all
BT-L4659N
BT-N4659N
BT-NT4659N
BT-HC4659
BT-HD4659
BT-HS4659
all
all
all
all
all
all
PIR ceiling mounted sensor LG-048820 all BT-BMSE3001 all
PIR+US double technology ceiling
mounted sensor LG-048822 all BT-BMSE3003 all
IP55 PIR wall mounted sensor LG-048834 all
Memory module BT- F425 10W01
Control BT-K4652M2
BT-K4652M3
all
all
Control actuator BT-K4672M2S
BT-K4672M2L
all
all
1
2

MyHOMEServer1
Installation Manual
10
Description Legrand code
From
production
batch:
BTicino code
From
production
batch:
Thermostat with Display
LG-067459
LG-064170
LG-752131
LG-752731
all
all
all
all
BT-LN4691
BT-H4691
all
all
Temperature control probe
BT-KM4691
BT-KG4691
BT-KW4691
all
all
all
Probe without adjustment
LG-067458
LG-573924
LG-573925
13W36
13W36
13W36
BT-L4693
BT-N4693
BT-NT4693
BT-HC4693
BT-HS4693
BT-HD4693
13W36
13W36
13W36
13W36
13W36
13W36
DIN actuator with 2 independent relays LG-003579 13W06 BT-F430/2 13W06
DIN actuator with 4 independent relays LG-003580 13W06 BT-F430/4 13W06
DIN actuator with 8 independent relays LG-003517 all BT-F430R8 all
DIN actuator with 2 0-10 V outputs LG-003518 all BT-F430V10 all
DIN actuator with 3 independent relays and 2 0-10
V outputs LG-003519 all BT-F430R3V10 all
Temperature Control Devices that can be directly associated via MyHOMEServer1
Note: in the case of systems with 99-zone temperature control unit, the device configuration must be made by
means of physical or virtual configuration. In this case, all the batches are compatible.

MyHOMEServer1
Installation Manual
1110
Description
1. RJ 45 for LAN Ethernet 10/100 Mbit.
2. USB port for future uses.
3. User interface LEDs:
– System: On connecting the power supply it switches on and off and the next time it switches
on it indicates that the Web Server is operative.
– Speed: Connection speed: ON = 100 Mbit; OFF = 10 Mbit.
– Link: When on, it indicates that the Ethernet network has been found.
4. DEVICE ID: device identification unique code.
5. USER CODE: user code which allows the creation of a connection to the user/administrator,
without having an account.
6. 2 wire BUS for automation connection.
7. Additional power supply.
8. Restart pushbutton:
– short pressure (1") = device restart;
– long pressure (10") = Dynamic IP Setting (DHCP).
After the long pressure of the reset pushbutton, the system LED will flash twice slowly and
twice quickly for about 10”.
9. INSTALLER CODE: installer code which allows the creation of a connection to the system and
configuring it.
DEVICE ID:
0000000
INSTALLER CODE:
00000000
1
2
3
4
5
67
8
9

MyHOMEServer1
Installation Manual
12
Wiring diagrams
Connections
After connecting all the devices and then powering the system, wait for the actuator LED to stop
flashing. The controls will continue to flash until the association is made.
For correct operation it is fundamental that the connection is made on the automation BUS (see
MyHOME Automation Guide), it is not possible to install MyHOMEServer1 on systems with logic
expansion.
Note: only supplies the system after all the devices are connected.
The maximum number of manageable channels is 175 (see table)
Note: to make use of all its functions, the MyHOMEServer1 must be connected to the internet
F411U2F411U2
230 Vac
ON
OFF
E46ADCN
MyHOMEServer1
L4652/2 L4652/2
BUS
RJ 45
Home Wi-Fi Router
+P1 M1 M2 - +P1 M3 M4 - NC C NO +A +R
+P i1 i2 - - - - -+P +Pi3 i4 i5 i6 A B+ 12 V
Burglar-alarm central unit
DEVICE ID:
0000000
INSTALLERCODE:
00000000

MyHOMEServer1
Installation Manual
1312
Access to the system
To be able to configure the system so that the user can use all the functions which the MyHOME_
Up system puts at your disposal you must:
A. On your Smartphone run the App to read the QR codes and then frame the QR Code
Note: you can find the same QR code in the Instruction Sheet supplied with the MyHOMEServer1
1. download the App from the stores (for iOS devices from App Store, for Android devices from
Play Store);
2. create a connection to the system as installer;
3. create zones and rooms to organise the objects in the best way;
4. create objects and associate them to the system devices.
A

MyHOMEServer1
Installation Manual
14
Connection to the system
The list of found MyHOMEServer1s appears
1. Touch to connect to your MyHOMEServer1. If this is not found see chapter“What to do if”.
2. Select your MyHOMEServer1 identifying it by means of the ID DEVICE on the front of the
device
MyHOME_Up
Add a connection to the
MyHOME_Up Gateway
Add
powered by ISAAC
1
1
MyHOME_Up
Add a connection to the
MyHOME_Up Gateway
Add
Cancel
Enter IP manually
ID:00000010
Select the MyHOMEServer1 Gateway
you want to access
2
DEVICE ID:
0000000
INSTALLER CODE:
00000000
DEVICE ID:
0000000
INSTALLER CODE:
00000000

MyHOMEServer1
Installation Manual
1514
4. Enter a name to identify the new connection being created
5. Enter the INSTALLER CODE found on the front side of the device
6. Touch to save the system connection.
Note: access via account (A) is reserved to the end user
3. Touch to create the connection and access via local network with the INSTALLER CODE
Access with PIN CODE
User1
[e-mail]
MyHOME_Up
powered by ISAAC
I do not have the credentials >
password
User name
Connection name
If you already have an account, assign
a name to the connection and
enter your credentials
Createte a connectionCancel Save
A
3
Access with PIN CODE
User1
[e-mail]
MyHOME_Up
powered by ISAAC
PIN CODE
Connection name
It is possible to access with PIN CODE
only from local network
Createte a connectionCancel Save
Where do I nd the PIN CODE? >
4
5
6
DEVICE ID:
0000000
INSTALLER CODE:
00000000
DEVICE ID:
0000000
INSTALLER CODE:
00000000

MyHOMEServer1
Installation Manual
16
7. The system is now connected, touch to access.
A scan and the automatic detection of the connected devices will activate automatically. An
address will be allocated to each actuator channel, even if not used to drive a load. To check
the number of engaged channels (max. 175), refer to the compatibility table.
Note: it is not possible to have more than 175 channels per system. If this limit is exceeded,
MyHOME_Up will ask to remove any excess devices from the system.
At the end of the procedure the home page appears.
A zone and some rooms which you can access from the Home page are created automatically.
System 1
Access with PIN CODE
MyHOME_Up
powered by ISAAC
I1
MyHOME_Up
Home
powered by ISAAC
Structure loading in progress, wait...
7

MyHOMEServer1
Installation Manual
1716
Home page
On entering the Home Page you can access the navigation structure to be customised depending
on the Customer's requirements.
Here you can configure all the components/objects connected to the home-automation system,
organising them in the best way.
A. Zone name
B. Add a room
C. Room name
D. Modify the room
E. Navigation bar
F. Rooms
Ground oor
A
B
E
C
D
F
Kitchen
Living room
Favourites Home Scenarios Security Other

MyHOMEServer1
Installation Manual
18
Favourites Go to the favourites page which will contain the objects which the user will add.
Home
Return to the home page, open the zone selection panel and modify/move/
cancel the zone
Scenarios
Go to the scenario page where you can create, modify and perform some
scenarios to control the system in an advanced way.
Security
Go to the Burglar Alarm system* where you can switch the system on/off via the
insertion scenarios and other functions.
Other
Go to the page where there is a series of settings for more complete
management of the system:
System check Displays the devices found on the system
Associations Can display the associations between the graphic objects
and the devices on the system
Groups Can create a group of actuators
General controls Can associate the general control function to a system
control
System General information on the MyHOMEServer1 and App
Meteo Displays meteo data supplied by Meteo Online
Activates service and sets the city to be monitored
Geolocation Sets the geographic position of the MyHOMEServer1
Network Displays or modifies the network connection parameters
Email Sets the parameters to send mail
Date and time Displays the date and time set
Set the date and time of the MyHOMEServer1
System reset Resets the Gateway and/or system and Gateway
Disconnect Disconnects the installer from the system
*Note: this function is only present if you have a BTicino Burglar Alarm system (alarm control units
4200, 4201, 4203) and have made the connection with the control unit following the procedure.

MyHOMEServer1
Installation Manual
1918
Zones
The various rooms which make up the system can be organised in zones (e.g.: Ground floor,
second floor etc...).
As well as moving between the various zones you can create new ones, change the name,
rearrange them or cancel them
The default App suggests preset zones (Home/Ground Floor/First Floor/Tavern); you can add one
of these or a customised one, by touching .
The “Tavern”zone has been added
Before adding and configuring the objects the zones and rooms should be customised as required
by the user
1. Touch to open the zone panel
2. Touch to add a zone
3. Touch to add a zone.
Create a zone
Ground oor
Kitchen
Living room
Ground oor
Favourites Home Scenarios Other
Kitchen
Living room
Cancel
List of zones
Ground oor
First oor
Add a zone
2
Favourites Home Scenarios Security Other
1
Ground oor
Favourites Home Scenarios Other
Kitchen
Living room
Cancel
List of zones
Ground oor
First oor
Tavern
Add a zone
Ground oor
Favourites Home Scenarios Other
Kitchen
Living room
Cancel
Add a zone
Home
Tavern
Ground
oor
First
oor
3

MyHOMEServer1
Installation Manual
20
The zone has been modified
1. Touch to modify the zone name
2. Modify the name
3. Touch to save the Modifytion
Modify a zone
Ground oor
Favourites Home Scenarios Other
Kitchen
Living room
Cancel
List of zones
Ground oor
First oor
Tavern
Add a zone
Ground oor
Favourites Home Scenarios Other
Kitchen
Living room
Cancel
List of zones
Ground oor
First oor
Add a zone
Tavern
2
1
Ground oor
Favourites Home Scenarios Other
Kitchen
Living room
Cancel
List of zones
Ground oor
First oor
Garden
Add a zone
Ground oor
Favourites Home Scenarios Other
Kitchen
Living room
Cancel
List of zones
Ground oor
First oor
Add a zone
Garden
3