Buffalo Tools IOCM24 User manual

Part # ItemDescriptionQty
1Convex mirror1 pcs
2Clasp 2 pcs
3Screw M6*16 4 pcs
4Left L part 1 pcs
9
Expansion screw for Wall Mount
3 pcs
Part # ItemDescriptionQty
The adjustable angle is about 60°
ASSEMBLY INSTRUCTIONS WALL OR POST
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
This manual provides important information on proper operation & maintenance. Every effort has been
made to ensure the accuracy of this manual. These instructions are not meant to cover every possible
condition and situation that may occur. We reserve the right to change this product at anytime without
prior notice.
IF THERE IS A NY QUE STION AB OUT A CO NDITION BEING S AFE OR U NSAF E, DO
NOT US E THIS PRODUCT!
DO NOT R ETURN T HIS PROD UCT TO T HE RETA ILER - C ONTA CT CUST OMER
SERV ICE.
If you experience a problem, have questions or need parts for this product, visit our website
http://www.buffalotools.com or call Customer Service at 1-888-287-6981, Monday-Friday,
8 AM - 4 PM Central Time. A copy of the sales receipt is required.
KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE REFERENCE
IOCM24
INDOOR / OUTDOOR 24" CONVEX MIRROR
5Right L part 1 pcs
6Screw M8*20 4 pcs
7Nut M8 4 pcs
Wall fitting for Wall Mount
1 pcs8

1. Use 2 pieces M8*20 screws through the
clasp, then use 2 pieces M8 nuts on
the screws. Do not tighten until
assembly is complete.
2. Adjust the left L part and right L part on the back
of convex mirror. Put 4 pieces M6*16 screws on the
L parts and convex mirror.
4. Adjust the left L part and right L part on the
back of convex mirror, then add 4 pieces
M6*16 screws on the L parts and convex mirror.
5. Adjust the clasp, then use 2 pieces
M8*20 screw to connect the clasp
and L parts. Use 2 pieces M8 nuts
on the screw. Tighten all nuts.
WALL
4. Use 3 pieces expansion
screws to hang on wall.
SSSSEEMMBBLLYYWALL A
SSSSEEMMBBLLYYPOST A
3. Adjust the clasp, then use 2 pieces M8*20
screw to connect clasp and L part. Use 2
pieces M8 nut on the screw. Tighten all nuts.
1. Use a 2 inch diameter post. 2. Combine 2 pieces of clasps on the post.
Use 2 pieces M8*20 screws through the clasps,
then use 2 pieces M8 nuts on the screws.
Do not tighten until
assembly is complete.
201707