Buffalo ADCHAIR1 User manual

1. Attach Back (#A) and Seat (#B) using Bolt-M6x40mm (#AA).
2. Attach Left Vertical Back Support (#E1) to Left Armrest (#C1) using Bolt-M6x35mm (#BB).
3. Attach Left Front Leg (#D1) to Left Armrest (#C1) using Bolt-M6x35mm (#BB).
4. Attach Left Vertical Back Support (#E1) to Seat (#B) using Bolt-M6x30mm (#CC).
5. Attach Left Front Leg (#D1) to Seat (#B) using Bolt-M6x40mm (#AA).
6. Attach Right Vertical Back Support (#E2) to Right Armrest (#C2) using Bolt-M6x35mm (#BB).
7. Attach Right Front Leg (#D2) to Right Armrest (#C2) using Bolt-M6x35mm (#BB).
8. Attach Right Vertical Back Support (#E2) to Seat (#B) using Bolt-M6x30mm (#CC).
9. Attach Right Front Leg (#D2) to Seat (#B) using Bolt-M6x40mm (#AA).
10. Attach Left Vertical Back Support (#E1) with Right Vertical Back Support (#E2) to Back (#A)
using Bolt-M6x40mm (#AA).
11. Hand tighten all bolts in place, then tighten with Hex Wrench (#EE) once fully assembled.
ADCHAIR1 (BLACK/DRIFTWOOD) ADCHAIR2 (BLACK/GREY)
ADCHAIR3 (BLACK/TAN) ADCHAIR4 (WHITE/TAN)
ADCHAIR5 (WHITE/DRIFTWOOD)
BUFFALO CORP 950 Hoff Road St Louis, MO 63366 Customer Service Phone [phone]
ASSEMBLY INSTRUCTIONS 300 lb Weight Capacity
PARTS LIST
Hex Wrench

BUFFALO CORP 950 Hoff Road St Louis, MO 63366 Customer Service Phone [phone]
ASSEMBLY INSTRUCTIONS NOTE: Hand tighten all bolts in place, then
tighten with hex wrench when fully assembled.