Buffalo MCDSG User manual

201703
MCDSG
Double Seat Glider Chair
WARNING!
Maximum Weight Capacity Is 400 Lbs
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
This manual provides important information on proper operation & maintenance. Every effort has been
made to ensure the accuracy of this manual. These instructions are not meant to cover every possible
condition and situation that may occur. We reserve the right to change this product at any time without
prior notice.
IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR
UNSAFE,
DO NOT OPERATE THIS PRODUCT!
DO NOT RETURN THIS PRODUCT TO THE RETAILER –
CONTACT CUSTOMER SERVICE.
If you experience a problem, have questions or need parts for this product, call Customer Service at
1-888-287-6981, Monday-Friday, 8 AM - 4 PM Central Time. A copy of the sales receipt is required.
FOR CONSUMER USE ONLY – NOT FOR PROFESSIONAL USE.
KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE
REFERENCE.

MCDSG Double Seat Glider Chair Assembly Instructions 2
Unpack product from package and review contents. Keep all packaging until product has been
reviewed. This product should be inspected prior to use to make certain all parts are intact and safe to
use after assembly.
Keep the work area clean and well lit. A cluttered work area may cause accidents.
Never allow children to use this product without responsible adult supervision. When operating this
product, keep children at a safe distance from the work area.
Some chemicals can damage the finish on the product. Do not use harsh chemicals such as alcohol,
ammonia, gasoline, carbon tetrachloride, paint thinner, etc. to clean this product. Use soap and water.
Make sure all parts are available before assembly. Two adults may be required for assembly. During
assembly, position on soft carpet or non-abrasive surface to avoid damage to the chair.
Regularly check all bolts and tighten any that are loose.
COMPONENTS
A. Acorn Nut - 16 Pieces
B. Short Screw - 10 pieces
C. Plastic Spacer - 4 pieces
D. Long Screw - 19 pieces
E. Long Washer - 16 pieces
F. Lock Nuts - 29 pieces
G. Small Washer - 58 pieces
H. End Caps - 2 pieces
1) Main Frame - 2 pieces
3) Side Support - 2 pieces
7) Chair Back
4) Swing Arms - 4 pieces
8) Chair Seat
2) Straight Main Frame Crossmember
5) Chair Frame Arm
6) Chair Frame Crossmember

MCDSG Double Seat Glider Chair Assembly Instructions 3
ASSEMBLY
1) Connect main frame &
crossmember #1 & #2. insert
the End Cap (H). Use Long
Screw + Small Washer +
Frame + Small Screw + Nut
2) Connect chair frame and
crossmember #5 & #6 by
firmly pressing the kinked end
into the open end.
Connect chair back and seat
with Small screw + Big
Washer + #7 & #8 + Big
Washer + Nut
Connect seat hardware with
Small Screw + Big Washer +
Seat + Big Washer + Nut
Place the seats inside
the frame.
Assemble by using the
hardware Small Screw +
Big Washer + Frame +
Big Washer + Nut
Long Screw + Small Washer
+ Frame + Spacer + Seat +
Side Support + Small
Washer + Nut
Add hardware Long Screw
+ Small Washer + Frame +
Side Support + Small
Washer + Nut
Assemble Long
Screw + Small
Washer + Frame +
Small Washer +
Nut
Assemble Seta & Chair
frame with Long Screw
+ Small Washer +
Frame + Spacer + Small
Washer + Nut
Place side support between two
frames. Use hardware Long Screw
+ Small Washer + Frame + Big
Washer + Support + Big Washer
Spacer + Nut + Acorn Nut
Put chair frame and seat
inside the main frame.
REVIEW ALL WARNINGS ON BACK PAGE

MCDSG Double Seat Glider Chair Assembly Instructions 4
GENERAL PRODUCT SPECIFICATIONS
FEATURES
• Seats Up to 2 People
• Provides Gentle, Relaxing Rocking Motion
SPECIFICATIONS
• Measures 48 3/4” x 33 1/4” x 31 3/4”
• Powder-Coated Steel Resists Rust
• Max Weight Capacity is 400 lbs
IMPORTANT SAFETY RULES
COMMON SENSE AND CAUTION ARE FACTORS WHICH CANNOT BE BUILT INTO ANY PRODUCT.
THESE FACTORS MUST BE SUPPLIED BY THE OPERATOR.
Keep the work area clean and well lit during assembly.A cluttered work area may cause accidents.
Never allow children to use this product without responsible adult supervision.
For your own safety, use only parts made for this Glider Chair. Do not modify or change the
assembly from its original design.
Maximum weight capacity is 400 pounds.
Inspect the unit carefully before use. Do not use the Glider Chair if any component is loose or
damaged.
Use on a flat, level surface.