Buffalo HJ328 User manual

5 TIER MDF SHELVING
ASSEMBLY INSTRUCTIONS
WWW.BUFFALOSHELVING.CO.UK
HJ328
Follow Manual
Carefully
Follow Manual
Carefully
Keep Small
Parts Away from
Children
Do Not Exceed
Weight Limit
Keep Away from
Children
Do Not Climb Keep Away from
Fire
Handle and
Dispose of Parts
Properly Watch the Assembly Video!
SET UP PARTS
• 2 PEOPLE REQUIRED
• PROTECT FLOOR WITH MAT
• WEAR GLOVES WHEN ASSEMBLING
• ENSURE COMPONENTS ARE IN GOOD
CONDITION BEFORE ASSEMBLING
• SET POWER TOOLS TO LOW SPEED
• DO NOT TIGHTEN SCREWS UNTIL
FULLY ASSEMBLED
• HAMMER REQUIRED
STEP 1
• ATTACH PLASTIC FEET TO KEYHOLE
UPRIGHTS x4
STEP 2
• ATTACH SHORT AND LONG SUPPORTS
IN BOTTOM 2 KEYHOLES AND TAP
WITH HAMMER UNTIL SLOTTED IN. x2

5 TIER MDF SHELVING
ASSEMBLY INSTRUCTIONS
WWW.BUFFALOSHELVING.CO.UK
HJ328
Follow Manual
Carefully
Follow Manual
Carefully
Keep Small
Parts Away from
Children
Do Not Exceed
Weight Limit
Keep Away from
Children
Do Not Climb Keep Away from
Fire
Handle and
Dispose of Parts
Properly Watch the Assembly Video!
STEP 3
• ADD 2 SUPPORT BEAMS FOR EACH
SHELF AS SHOWN.
STEP 4
STEP 5
• REPEAT STEPS 2 AND 3 FOR THE 2nd
SHELF POSITION.
• IF BUILDING A WORK BENCH, ADD
2 LONG SUPPORTS WITH A CENTRE
BEAM FOR THE TOP.
• REPEAT STEPS 2-5 FOR A 2nd UNIT.

5 TIER MDF SHELVING
ASSEMBLY INSTRUCTIONS
WWW.BUFFALOSHELVING.CO.UK
HJ328
Follow Manual
Carefully
Follow Manual
Carefully
Keep Small
Parts Away from
Children
Do Not Exceed
Weight Limit
Keep Away from
Children
Do Not Climb Keep Away from
Fire
Handle and
Dispose of Parts
Properly Watch the Assembly Video!
STEP 6
STEP 7
• REPEAT STEPS 2-3 FOR 5th, 4th, AND
3rd SHELVING POSITION (WORKING
DOWNWARDS).
• IF MAKING SHELVING UNIT, USE
LEG JOINERS TO CONNECT AN
ADDITIONAL KEYHOLE UPRIGHT TO
EACH FRAME.
• POSITION UPRIGHT AT AN OUTWARD
ANGLE AND HAMMER FIRMLY IN
PLACE TO STRAIGHTEN.
STEP 8
• SLOT MDF SHELVES INTO PLACE AND
ATTACH REMAINING PLASTIC FEET TO
THE TOP OF THE UNIT.