BUFFBEE RS11 User manual

RS11 User Manual
please email us at [email protected]
If a faulty product is found when setting up
TIPS: Battery backup is for saving TIME and ALARM settings only.

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

1
Instructional Video
Thank you for purchasing on BUFFBEE！Please read
these instructions carefully and keep the user manual in
safe place for future reference.
Please scan the QR code here to access the instructional
video of this product.

2
AC100-240V, 50/60Hz.
Output: 5V/1A
Power Specifications
• FM Radio
• 7 Colorful Night Light
• 12/24H Mode
• 9 Minutes Snooze
• 0-100% of the Display Dimmer
• 0-16 Level Adjustable Volume
• Sleep Timer
• Battery Backup (Only Memory Function)
Features

Front View
3
Top View
Alarm Setting On/Off
Vol -
Up
Sleep Timer
Time Setting
Vol +
Down
Radio On/Off
Snooze & Nightlight
Alarm On
In 12 hour mode
Time

Back View
Bottom View
4
Display Dimmer
Power Connector
Battery Compartment
(Battery is built in already)
Model:RS11 Input:100-240V Power:DC 5V-1A
Made in China
Battery backup is for saving
TIME and ALARM settings only

5
1. Plug the adaptor into a standard household outlet, you
will see 12:00 on the display and the clock is ready to
be set.
2. Please remove the battery tab before use.
Getting Started
Notice：•If the display is “blank” after plugging in, please check
whether the DISPLAY DIMMER on the back is at the
HIGH position.
•Under the battery power, the display will go blank and
preset alarm will not go off. Battery backup is for
saving TIME and ALARM settings only.
•Please extend the FM antenna on the back of the
clock.
•If you press any button, all the buttons will light up and
then turn off automatically after 5 seconds.

6
Time Setting
1. Press the “ ” button to enter HOUR setting. The
HOUR digits will flash on the display. Press “ ” or
“ ” button to advance to the correct hour.
2. Press the “ ” button to confirm and enter MINUTE
setting. When the MINUTE digits flash, press “ ”
or “ ” button to advance to the correct minute.
HOUR Flashes

7
3. Press the “ ” button to confirm and enter time
format (12/24H) setting. Press “ ” or “ ”
button to select time format. When using the 12-hour
time format, AM/PM icon will appear on the display to
suggest morning/afternoon time.
4. Press the “ ” button to confirm and exit the
time setting mode.
MINUTE Flashes
Notice：The clock will exit automatically from the TIME setup
mode if no action is taken within 5 seconds.
(Action refers to pressing the desired button for setup)

8
Alarm Setting
1. Press the “ ” button to enter ALARM HOUR
setting. The HOUR digits will flash on the display.
Press the “ ” or “ ” buttons to advance to the
desired hour.
2. Press the “ ” button to confirm and enter ALARM
MINUTE setting. The MINUTE digits will flash on the
display. Press the “ ” or “ ” buttons to advance
to the desired minute.
HOUR Flashes

9
Notice：The clock will exit automatically from the ALARM setup
mode if no action is taken within 10 seconds.
(Action refers to pressing the desired button for setup)
MINUTE Flashes
3. Press the “ ” button to confirm and enter WAKE
UP SOUND setting. The icon of alarm will flash on the
display. Press the “ ” or “ ” buttons to choose
from Bird chirping sound, Piano sound, Beep sound or
FM radio which is the last tuned in radio station or the
station you set in WAKE UP RADIO ALARM (Page 13).
4. Press the “ ” ALARM button to confirm and exit
the alarm setting mode.

10
Alarm Volume Setting
When the alarm goes off, you have two options:
1. Press “ ” button to stop the alarm when it’s ringing.
Alarm will go off on the next day.
Alarm Pause & Snooze
When radio is OFF, press the “ ” or “ ” buttons
to select the volume level. (0-16 adjustable)
A number will be shown on the display.
Volume

11
1. Press the “ ” button to turn on alarm.
2. Press and hold the “ ” button for 2 seconds to
completely turn off alarm and the indicator “ ”
will disappear on the display. The alarm will NOT go
off on the next day.
Alarm On/Off
1. Press the “ ” button to turn on the nightlight.
Then press the “ ” button to change the color of
the night light.
2. Press and hold the “ ” button for 2 seconds, the
night light will be turned off.
Nightlight Setting
2. Press “ ” button to snooze, the indicator “ ”
will flash on the display. The alarm will go off again 9
minutes later.

12
3. Use the “ ” or “ ” buttons to adjust the
volume of FM radio. 0-16 level adjustable.
FM Radio Setting
Please extend the FM antenna on the back of the clock.
1. Press the “ ” button, FM radio will be ON/OFF.
2. Press and hold “ ” button for 2s, FM radio will
scan and auto-store the scanned stations. Once the
station search is completed, the first station will be
played automatically. Press the “ ” or “ ”
buttons to tune from auto-store stations.

13
Wake Up Radio Alarm Setting
You can use sleep timer to turn off nightlight and radio
automatically when the preset sleep timer comes.
Sleep Timer
When radio is on, press the “ ” or “ ” button to
tune radio stations you like, then press and hold “ ”
button until icon “AL” appear on the display screen. The
clock immediately saves this station as Wake Up Radio
Alarm Sound.

14
Slide the DISPLAY DIMMER slider at the back of the
clock to adjust the display brightness. (It can be adjusted
from 0 to 100%)
Brightness Setting
1. Press repeatedly the “ ” button to select the sleep
timer ranging from OFF, 15, 30, 60, 90,to120minutes.
The sleep timer will be seen on display.
2. To turn off the sleep timer, press “ ” button to
select “OFF” and wait for 3 seconds for it to work or
hold “ ” button for 2seconds to turn it off directly.
3. When sleep timer is on, press “ ” button to see
the sleep timer remained.

15
The radio alarm clock comes with one year warranty.
If you have any issue with this radio alarm clock,
please contact us at [email protected].
We will address your issue within 24 hours.
Support
Install 1* CR2032 battery into Battery Compartment.
(Battery is built in already).
Notice: Battery backup is for saving TIME and ALARM
settings only.
Battery Operated Setting